SAE AS81703A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-04-2012
Publisher
Superseded date
24-05-2023
Superseded by
€159.00
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY FOR MILITARY CONTRACT
(UNLESS OTHERWISE SPECIFIED)
6. NOTES
Specifies three series of environment resisting, circular, miniature electrical connectors (plugs and receptacles) with removable crimp and/or nonremovable solder contacts, and accessories.
| DevelopmentNote |
Supersedes MIL C 81703. (09/2004)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers three series of environment resisting, circular, miniature electrical connectors (plugs and receptacles) with removable crimp and/or nonremovable solder contacts, and accessories. The connectors are only recommended for replacement and are not specified for aircraft applications (see AS50881).
| SAE AS34641B | CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) |
| MIL-STD-1353 Revision C:2014 | Electrical Connectors, Plug-in Sockets and Associated Hardware, Selection and Use of |
| DSCC 89017 : D | CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2 |
| MS3187 Revision F:2007 | Plug, End Seal, for MIL-DTL-26482, SAE-AS50151, SAE-AS81703 and MIL-DTL-83723 Electrical Connectors |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MIL-HDBK-1646 Base Document:2016 | Selectionof Electrical Contacts, Connectors and Associated Servicing Tools |
| SAE AIR6151B | Torque, Threaded Application, Electrical Connector, Accessory and Terminal Board Installation |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| SAE ARP6903 | Guide for Achieving Plating/Finish Compatibility with Connectors and Accessories used in Electrical Wiring Interconnect Systems (EWIS) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| SAE AS81969/30 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 2, COMPOSITION C, FOR UNWIRED CONTACTS |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
| SAE AS39029/4B | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS) |
| MIL-STD-147 Revision E:2008 | Palletized Unit Loads |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| PPP-B-566 Revision E:1974 | Boxes, Folding, Paperboard |
| SAE AIR1351H | Manufacturers\' Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories |
| SAE AS39029/5D | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, MIL-DTL-83733 CONNECTORS, MIL-DTL-12883/40, AND /41 RELAY SOCKETS) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MS3187 Revision F:2007 | Plug, End Seal, for MIL-DTL-26482, SAE-AS50151, SAE-AS81703 and MIL-DTL-83723 Electrical Connectors |
| SAE AS31461A | CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, CRIMP TYPE, SOLDER MOUNTING, PUSH-PULL, COUPLING, SERIES 3 (CLASS N) |
| MIL-DTL-81381 Revision C:2005 | Wire, Electric, Polyimide-Insulated, Copper or Copper Alloy |
| SAE AS81969/17 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION C |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MS3461 Revision A:1975 | Test Gage, MIL-C-0026482 Series 2 or MIL-C-81703 Series 3 Contact Retention Feature |
| SAE AS31831A | COVER, PROTECTIVE, ELECTRIC CONNECTOR, RECEPTACLE, PUSH-PULL COUPLING |
| SAE AS39029/7A | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS) |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| SAE AS31491A | CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC CRIMP TYPE, SINGLE HOLE MOUNTING PUSH-PULL COUPLING, SERIES 3 (CLASS N) |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| MS3460 Revision A:1975 | Test Gage, MIL-C-0026482 Series 1 or MIL-C-81703 Series 2 Contact Retention Feature |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| PPP-B-676 Revision E:1992 | Boxes, Setup |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| SAE AS33704 | INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SHELL SIZE 61 (FOR AS81703 CONNECTORS) |
| SAE AS50881F | Wiring Aerospace Vehicle |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-PRF-8516 Revision G:1997 | Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured |
| MS3462 Revision B:1975 | Test Gage, MIL-C-26482 Series 2 (Class N), MIL-C-81703 Series 3 (Class N) and MIL-C-0081511 Series 3 And 4 (Class L) Contact Retention Feature |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| SAE AS39029D | Contacts, Electrical Connector, General Specification For |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| SAE AS39029/8A | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS) |
| SD 6 : 20140201 | PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment — Part 1: Metrological confirmation system for measuring equipment |
| SAE AS31821B | COVER, PROTECTIVE, ELECTRONIC CONNECTOR, PLUG, PUSH-PULL COUPLING |
| MIL-S-7742 Revision D:1991 | Screw Threads, Standard, Optimum Selected Series: General Specification for |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.