SAE J 2044 : 2009
Current
The latest, up-to-date edition.
QUICK CONNECT COUPLING SPECIFICATION FOR LIQUID FUEL AND VAPOR/EMISSIONS SYSTEMS
Hardcopy , PDF
English
13-08-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 References
2.1 Applicable Publications
2.1.1 SAE Publications
2.1.2 ASTM Publication
2.2 Related Publication
2.2.1 SAE Publication
3 Definitions
4 Size Designation
5 Test Temperatures
6 Functional Requirements
6.1 Leak Test
6.1.1 Test Procedure (Low Pressure)
6.1.2 Acceptance Criteria
6.1.3 Test Procedure (High Pressure)
6.1.4 Acceptance Criteria
6.1.5 Test Procedure (VACUUM)
6.1.6 Acceptance Criteria
6.2 Assembly Effort
6.2.1 Test Procedure (New Parts)
6.2.2 Test Procedure
6.2.3 Acceptance Criteria
6.3 Pull-Apart Effort
6.3 1 Test Procedure
6.3.2 Acceptance criteria
6.4 Side Load Capability
6.4.1 Test Procedure
6.4.2 Acceptance Criteria (Side Load Leak Test)
6.4.3 Test Requirement (Side Load Fracture Test)
6.4.4 Acceptance Criteria
6.5 Resistance to Evaporative Emissions
6.5.1 Test Procedure
6.5.2 Acceptance Criteria
6.6 Electrical Resistance
6.6.1 Test Procedure
6.6.2 Acceptance Criteria
7 Design Verification/Validation Testing
7.1 Corrosion
7.1.1 Test Procedure
7.1.2 Acceptance Criteria
7.2 Zinc Chloride Resistance
7.2.1 Test Procedure
7.2.2 Acceptance Criteria
7.3 External Chemical and Environmental Resistance
7.3.1 Test Procedure
7.3.2 Fluid or Medium
7.3.3 Acceptance Criteria
7.4 Fuel Compatibility
7.4.1 Test Procedure
7.4.2 Test Fuels
7.4.3 Test Requirement
7.4.4 Acceptance Criteria
7.5 Life Cycle
7.5.1 Test Procedure
7.5.2 Vibration Frequency
7.5.3 Acceleration
7.5.4 Vibration Duration
7.5.5 Fluid Pressure
7.5.6 Fluid Flow (Liquid Fuel Quick Connectors Only)
7.5.7 Test Duration
7.5.8 Test Cycle
7.5.9 Acceptance Criteria
7.6 Flow Restriction
7.7 Elevated Temperature Burst
7.7.1 Test Procedure 16
7.7.2 Acceptance Criteria
8 Design Verification/Validation and In-Process Testing
Matrix
9 Notes
9.1 Marginal Indicia
Appendix A Mating Tube End Template Examples
This SAE Recommended Practice defines the minimum functional requirements for quick connect couplings used for supply, return, and vapor/emission fuel system connections.
| DocumentType |
Revision
|
| Pages |
23
|
| PublisherName |
SAE International
|
| Status |
Current
|
| BS ISO 13948-2:2016 | Diesel engines. Fuel injection pumps and fuel injector low-pressure connections Non-threaded (push-on) connections |
| CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
| 15/30328999 DC : 0 | BS ISO 13948-2 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR LOW-PRESSURE CONNECTIONS - PART 2: NON-THREADED (PUSH-ON) CONNECTIONS |
| 14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
| UL 60335-2-67:1ED 2017-12-22 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
| UL 60335-2-72:1ED 2017-09-15 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| SAE J 2599 : 2003 | FUEL FILLER PIPE ASSEMBLY DESIGN PRACTICE TO MEET LOW EVAPORATIVE EMISSION REQUIREMENTS |
| BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
| CSA C22.2 No. 60335-2-67 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| SAE J 2045 : 2012 | PERFORMANCE REQUIREMENTS FOR FUEL SYSTEM TUBING ASSEMBLIES |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
| 10/30202369 DC : 0 | BS ISO 13948-2 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR LOW-PRESSURE CONNECTIONS - PART 2: NON-THREADED (PUSH-ON) CONNECTIONS |
| SAE J 2260 : 2004 | NONMETALLIC FUEL SYSTEM TUBING WITH ONE OR MORE LAYERS |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| ISO 13948-2:2016 | Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.