SAE J 2442 : 2015
Current
The latest, up-to-date edition.
HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES
Hardcopy , PDF
English
22-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LAMP MARKINGS
5. GENERAL REQUIREMENTS
6. INDIVIDUAL DEVICE REQUIREMENTS
7. GUIDELINES
8. GLOSSARY OF SAE TERMS TO
NON-SAE TERMS
9. NOTES
Pertains to road vehicles except motorcycles. It describes the commonalities of installation requirements for lighting and light signaling devices contained in the regulatory requirements and industry standards of North America, Japan, and the widely-adopted UNECE ('European') Regulations.
| DocumentType |
Revision
|
| Pages |
49
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE J586_201605 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2838 : 2013 | FULL ADAPTIVE FORWARD LIGHTING SYSTEMS |
| SAE J 3069 : 2016 | ADAPTIVE DRIVING BEAM |
| SAE J592_200903 | SIDEMARKER LAMPS FOR USE ON ROAD VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 1383 : 2010 | PERFORMANCE REQUIREMENTS FOR MOTOR VEHICLE HEADLAMPS |
| SAE J583_201609 | FRONT FOG LAMP |
| SAE J852_201707 | FRONT CORNERING LAMPS FOR USE ON MOTOR VEHICLES |
| SAE J585_201406 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J586_201605 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| CFR 49(PTS400-571) : OCT 2017 | TRANSPORTATION |
| SAE J 578 : 2016 | COLOR SPECIFICATION |
| SAE J 1319 : 2015 | REAR FOG LAMP SYSTEMS |
| SAE J 581 : 2011 | AUXILIARY HIGH BEAM LAMPS |
| SAE J 588 : 2011 | TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2338 : 2011 | Recommendations of the SAE Task Force on Headlamp Mounting Height<br> |
| SAE J 1432 : 2016 | REAR HIGH MOUNTED STOP LAMPS AND REAR HIGH MOUNTED TURN SIGNAL LAMPS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 1957 : 2011 | CENTER HIGH MOUNTED STOP LAMP STANDARD FOR VEHICLES LESS THAN 2032 MM OVERALL WIDTH |
| SAE J222_201303 | FRONT POSITION LAMP |
| SAE J 2087 : 2016 | DAYTIME RUNNING LIGHT |
| ISO 2575:2010 | Road vehicles Symbols for controls, indicators and tell-tales |
| SAE J 1735 : 2011 | HARMONIZED VEHICLE HEADLAMP PERFORMANCE REQUIREMENTS |
| SAE J 2584 : 2011 | HEADLAMP MOUNTING HEIGHT FOR PASSENGER AND PICKUP TRUCK VEHICLES |
| SAE J 2261 : 2016 | STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 1373 : 2015 | REAR CORNERING LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 9.1 M IN OVERALL LENGTH |
| SAE J852_200903 | FRONT CORNERING LAMPS FOR USE ON MOTOR VEHICLES |
| SAE J587_201206 | LICENSE PLATE ILLUMINATION DEVICES (REAR REGISTRATION PLATE ILLUMINATION DEVICES) |
| SAE J592_200903 | SIDEMARKER LAMPS FOR USE ON ROAD VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 914 : 2014 | SIDE TURN SIGNAL LAMPS FOR VEHICLES LESS THAN 12 M IN LENGTH |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| SAE J 2042 : 2014 | CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR ON-ROAD VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J387_201404 | TERMINOLOGY - MOTOR VEHICLE LIGHTING |
| SAE J759_201404 | LIGHTING IDENTIFICATION CODE |
| SAE J 1383 : 2010 | PERFORMANCE REQUIREMENTS FOR MOTOR VEHICLE HEADLAMPS |
| ISO 303:2002 | Road vehicles Installation of lighting and light signalling devices for motor vehicles and their trailers |
| SAE J 2039 : 2014 | SIDE TURN SIGNAL LAMPS FOR LONG VEHICLES |
| SAE J594_201002 | REFLEX REFLECTORS |
| SAE J 2009 : 2016 | DISCHARGE FORWARD LIGHTING SYSTEM AND SUBSYSTEMS |
| SAE J583_201609 | FRONT FOG LAMP |
| SAE J593_201606 | BACKUP LAMP (REVERSING LAMP) |
| SAE J 2041 : 2013 | REFLEX REFLECTORS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 2040 : 2016 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.