SAE J 586 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH
Hardcopy , PDF
03-06-2024
English
12-05-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LIGHTING IDENTIFICATION CODE
5. TESTS
6. REQUIREMENTS
7. GUIDELINES
8. NOTES
This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles of less than 2032 mm in overall width.
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J 2261 : 2016 | STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 2358 : 2016 | LOW SPEED VEHICLES |
| MIL-STD-1179 Revision E:2011 | LAMPS, REFLECTORS AND ASSOCIATED SIGNALING EQUIPMENT FOR MILITARY VEHICLES |
| SAE J 2319 : 1997 | LOW-SPEED IMPACT BUMPER SYSTEM TEST PROCEDURE FOR PASSENGER VEHICLES |
| CSA M669 : 2017 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| MIL-DTL-32361 Revision A:2011 | COMPOSITE LIGHT, TAIL STOP, TURN AND MARKER |
| MIL M 8090 : F | MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR |
| SAE J 2999 : 2017 | Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis<br> |
| MIL-PRF-32212 Revision A:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS |
| SAE J 2442 : 2015 | HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES |
| NGCMA Z135 : 2004 | PERSONAL TRANSPORT VEHICLES - SAFETY AND PERFORMANCE SPECIFICATIONS |
| SAE AS 8090 : 2016 | MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR |
| ILTVA Z135 : 2012 | PERSONAL TRANSPORT VEHICLES - SAFETY AND PERFORMANCE SPECIFICATIONS |
| SAE J 1029 : 2012 | LIGHTING AND MARKING OF CONSTRUCTION, EARTHMOVING MACHINERY |
| SAE J 222 : 2013 | FRONT POSITION LAMP |
| SAE J 585 : 2014 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2258 : 2016 | LIGHT UTILITY VEHICLES |
| SAE J 585 : 2014 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| CFR 49(PTS400-571) : OCT 2017 | TRANSPORTATION |
| SAE J 578 : 2016 | COLOR SPECIFICATION |
| SAE J 1319 : 2015 | REAR FOG LAMP SYSTEMS |
| SAE J 588 : 2011 | TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 1957 : 2011 | CENTER HIGH MOUNTED STOP LAMP STANDARD FOR VEHICLES LESS THAN 2032 MM OVERALL WIDTH |
| SAE J 222 : 2013 | FRONT POSITION LAMP |
| SAE J 567 : 2015 | Light Source Retention System<br> |
| SAE J 1889 : 2015 | L.E.D. SIGNAL AND MARKING LIGHTING DEVICES |
| SAE J 1050 : 2009 | DESCRIBING AND MEASURING THE DRIVER'S FIELD OF VIEW |
| SAE J 2442 : 2015 | HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES |
| SAE J 2261 : 2016 | STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 592 : 2009 | SIDEMARKER LAMPS FOR USE ON ROAD VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2042 : 2014 | CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR ON-ROAD VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 575 : 2015 | TEST METHODS AND EQUIPMENT FOR LIGHTING DEVICES FOR USE ON VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 387 : 2014 | TERMINOLOGY - MOTOR VEHICLE LIGHTING |
| SAE J 759 : 2014 | LIGHTING IDENTIFICATION CODE |
| SAE J 594 : 2010 | REFLEX REFLECTORS |
| SAE J 576 : 2010 | PLASTIC MATERIAL OR MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLEX REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES |
| SAE J 2999 : 2013 | DETERMINATION OF THE EFFECTIVE PROJECTED LUMINOUS LENS AREA (EPLLA) BY DESIGN ANALYSIS |
| SAE J 2040 : 2016 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.