SAE J1040_200305
Current
The latest, up-to-date edition.
Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mining Machines
Hardcopy , PDF
English
13-05-2003
Foreword
1 Scope
2 References
3 Definitions
4 Methods and facilities
5 Loading procedures
6 Temperature-Material requirement
7 Acceptance criteria
8 Labeling of the ROPS
9 Reported results
Appendix A Historical rationale
Applies to off-road work machines of mass greater than 700 kg that are commonly used in earthmoving, construction, logging, and mining applications as identified in SAE J 1116 and designed for an-board, seated operator.
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
SAE International
|
Status |
Current
|
SupersededBy | |
Supersedes |
This SAE Standard applies to the following off-road work machines of mass greater than 700 kg that are commonly used in earthmoving, construction, logging, and mining applications as identified in SAE J1116 JUN86 and designed for an-board, seated operator:aCrawler tractors and loaders (see SAE J1057 SEP88 Sections 3.1 and 7.1 and SAE J727 JAN86 for description and nomenclature).bGraders (see SAE J1057 SEP88 Section 6 and SAE J870 JUL84 for description and nomenclature).cWheel loaders, wheel tractors, and their modifications used for rolling or compacting, dozer equipped wheel tractors, wheel log skidders, skid steer loaders, and backhoe loaders (see SAE J1057 SEP88 Sections 3.2, 7.2, and 9 for description and nomenclature).dWheel industrial tractors (see SAE J1092 JUN86 for description and nomenclature).eTractor portion of semi-mounted scrapers, water wagons, articulated steer dumpers, bottom dump wagons, side dump wagons, rear dump wagons, and towed fifth wheel attachments (see SAE J1057 SEP88 Sections 4.1.1.4, 4.1.2, 4.2.1.1, 4.3.1.2, 4.3.1.3, 4.3.2, and 5 and SAE J869 JUL90 and SAE J728 JUL90 for description and nomenclature).fRollers and compactors (see SAE J1017 JAN86 for description and nomenclature).gRigid frame dumpers with full mounted bodies (see SAE J1057 SEP88 Sections 4.1.1.1, 4.1.1.2, 4.1.1.3, 4.1.1.5, and 4.3.1.1 and SAE J1016 JUL90 for description and nomenclature).NOTE—Additional machine types listed in SAE J1116 JUN86 may utilize these ROPS performance criteria if so directed by other SAE reports such as SAE J1042 JUN93. SAE J1194 MAY89 and SAE J2194 JUN93 cover agricultural tractors (defined in SAE J1150 OCT92).EXCLUSIONS—Machines whose use is predominantly, or entirely, in manufacturing plants and/or warehouses are specifically excluded. Rough terrain forklifts, 360 degree rotation excavators, and excavator based machines are also excluded along with rollover protection for the operator of an attachment with an alternate seat position from that used for mobile operation (for example, an attachment backhoe).
A-A-59492 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, 120 INCH LIFT HEIGHT, DS SAFETY RATED, PNEUMATIC RUBBER TIRES, ROUGH TERRAIN, FOR SHIPBOARD USE |
AWS D14.3/D14.3M : 2010 | SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION, AND AGRICULTURAL EQUIPMENT |
SAE J1042_201206 | Operator Protection for General - Purpose Industrial Machines |
CSA M424.1 : 2016 | FLAMEPROOF NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN GASSY UNDERGROUND COAL MINES |
KKK-L-1542 Revision D:1983 | LOADER, SCOOP TYPE, ARTICULATED, FOUR-WHEEL DRIVE |
CSA B352.2 : 0 | ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR AGRICULTURAL, CONSTRUCTION, EARTHMOVING, FORESTRY, INDUSTRIAL, AND MINING MACHINES - PART 3: TESTING REQUIREMENTS FOR ROPS ON CONSTRUCTION, EARTHMOVING, FORESTRY, INDUSTRIAL, AND MINING MACHINES |
CSA M424.2 : 2016 | NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN NON-GASSY UNDERGROUND MINES |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
SAE J2194_201611 | Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors |
ISO 3164:2013 | Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
SAE J 231 : 1992 | MINIMUM PERFORMANCE CRITERIA FOR FALLING OBJECT PROTECTIVE STRUCTURE (FOPS) |
SAE J1017_198601 | NOMENCLATURE—ROLLERS AND COMPACTORS |
SAE J154_199206 | OPERATOR SPACE ENVELOPE DIMENSIONS FOR OFF-ROAD MACHINES |
SAE J1042_201206 | Operator Protection for General - Purpose Industrial Machines |
SAE J 1164 : 1992 | LABELING OF ROPS AND FOPS AND OPS |
SAE J397_201503 | Deflection Limiting Volume - Protective Structures Laboratory Evaluation |
SAE J 869 : JUL 90 | COMPONENT NOMENCLATURE - CONSTRUCTION TWO AND FOUR WHEEL TRACTORS |
SAE J429_201405 | Mechanical and Material Requirements for Externally Threaded Fasteners |
SAE J 1057 : 1992 | IDENTIFICATION TERMINOLOGY OF EARTHMOVING MACHINES |
SAE J1194_201611 | Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors |
ISO 8981:1993 | Wheat Identification of varieties by electrophoresis |
ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
SAE J 1016 : 1992 | COMPONENT NOMENCLATURE - DUMPERS |
SAE J 870 : JUL 90 | COMPONENT NOMENCLATURE - GRADERS |
SAE J 728 : 1992 | COMPONENT NOMENCLATURE - SCRAPERS |
SAE J1092_199308 | NOMENCLATURE—INDUSTRIAL TRACTORS (GENERAL PURPOSE WHEEL) |
ISO 3471-1:1986 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Part 1: Crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrapers, articulated steer dumpers |
SAE J1116_201301 | Categories of Off-Road Self-Propelled Work Machines |
SAE J 1043 : 1992 | PERFORMANCE CRITERIA FOR FALLING OBJECT PROTECTIVE STRUCTURE (FOPS) FOR INDUSTRIAL MACHINES |
SAE J727_198601 | NOMENCLATURE—CRAWLER TRACTOR |
SAE J1119_201307 | Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) |
SAE J1150_199707 | TERMINOLOGY FOR AGRICULTURAL EQUIPMENT |
SAE J1199_201302 | Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners |
SAE J995_201202 | Mechanical and Material Requirements for Steel Nuts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.