SAE J2045_201211
Current
The latest, up-to-date edition.
Performance Requirements for Fuel System Tubing Assemblies
01-11-2012
1. SCOPE
2. REFERENCES
3. ROUTING RECOMMENDATIONS
4. TECHNICAL REQUIREMENTS
5. VALIDATION TESTING RECOMMENDATIONS
6. NOTES
Specifies the recommended minimum requirements for non-metallic tubing and/or combinations of metallic tubing to non-metallic tubing assemblies manufactured as liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems.
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Standard encompasses the recommended minimum requirements for non-metallic tubing and/or combinations of metallic tubing to non-metallic tubing assemblies manufactured as liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems. This SAE Standard is intended to cover tubing assemblies for any portion of a fuel system which operates above −40 °C (−40 °F) and below 115 °C (239 °F), and up to a maximum working gage pressure of 690 kPa (100 psig). The peak intermittent temperature is 115 °C (239 °F). For long-term continuous usage, the temperature shall not exceed 90 °C (194 °F). It should be noted that temperature extremes can affect assemblies in various manners and every effort must be made to determine the operating temperature to which a specific fuel line assembly will be exposed, and design accordingly.The applicable SAE standards should be referenced when designing liquid-carrying and/or vapor-carrying systems which are described in this document.Wherever possible or unless stated otherwise, systems tested to this document shall be in the final design intent configuration.
| CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
| UL 60335-2-67:1ED 2017-12-22 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
| UL 60335-2-72:1ED 2017-09-15 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| CSA C22.2 No. 60335-2-67 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
| SAE J2973_201402 | Fuel Components and Systems Leak Tightness Specifications and Test Practices (or Methods) |
| SAE J2260_200411 | Nonmetallic Fuel System Tubing with One or More Layers |
| SAE J517_201612 | Hydraulic Hose |
| SAE J1681_200001 | Gasoline, Alcohol, and Diesel Fuel Surrogates for Materials Testing |
| SAE J1645_201110 | Fuel Systems and Components - Electrostatic Charge Mitigation |
| SAE J1737_201305 | Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation |
| SAE J526_201611 | Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing |
| SAE J30_201202 | Fuel and Oil Hoses |
| SAE J2044_200908 | Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems |
| SAE J2587_201903 | Optimized Fuel Tank Sender Closure |
| SAE J2027_201305 | Standard for Protective Covers for Gasoline Fuel Line Tubing |
| SAE J2260_200411 | Nonmetallic Fuel System Tubing with One or More Layers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.