SAE J2261_201607
Current
The latest, up-to-date edition.
Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
Hardcopy , PDF
English
20-07-2016
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LIGHTING IDENTIFICATION CODE
5. TESTS
6. REQUIREMENTS
7. GUIDELINES
8. NOTES
This SAE Standard provides test procedures, requirements, and guidelines for stop lamps and turn signal lamps intended for use on vehicles 2032 mm or more in overall width.
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
SAE International
|
Status |
Current
|
Supersedes |
This SAE Standard provides test procedures, requirements, and guidelines for stop lamps and turn signal lamps intended for use on vehicles 2032 mm or more in overall width. Stop lamps and front- and rear-turn signal lamps conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.
ISO 16154:2005 | Tractors and machinery for agriculture and forestry — Installation of lighting, light signalling and marking devices for travel on public roadways |
MIL-PRF-45316 Revision J:2011 | TRAILER, TANK: POTABLE WATER, 400-GALLON, 2-WHEEL, M149A2 |
ASAE S279.10 : 1998 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
SAE J2042_201402 | Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
CSA M669 : 2017 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
SAE J586_201605 | Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
SAE J2999_201706 | Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis |
MIL-PRF-32212 Revision A:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS |
MIL-PRF-32214 Base Document:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE FRONT PARK AND TURN SIGNAL LAMP, WITH INFRA-RED SECURE FRONT BLACKOUT MARKER LAMP |
SAE J2039_201401 | Side Turn Signal Lamps for Long Vehicles |
SAE J2442_201507 | Harmonized Provisions for Installation of Exterior Lamps and Retro-Reflecting Devices on Road Vehicles Except Motorcycles |
SAE J1432_201601 | Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width |
SAE J222_201303 | Front Position Lamp |
SAE J585_201406 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width |
ASAE S279.11 : 2001 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
SAE J586_201605 | Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
CFR 49(PTS400-571) : OCT 2017 | TRANSPORTATION |
SAE J578_201603 | Color Specification |
SAE J588_201108 | Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
SAE J567_201502 | Light Source Retention System |
SAE J1889_201503 | L.E.D. Signal and Marking Lighting Devices |
SAE J2139_201412 | Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
CFR 49(PTS 300-399) : OCT 2017 | TRANSPORTATION |
SAE J1690_199608 | FLASHERS |
SAE J387_201404 | Terminology - Motor Vehicle Lighting |
SAE J759_201404 | Lighting Identification Code |
SAE J576_201002 | Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.