SAE J2442_201507
Current
The latest, up-to-date edition.
Harmonized Provisions for Installation of Exterior Lamps and Retro-Reflecting Devices on Road Vehicles Except Motorcycles
Hardcopy , PDF
English
22-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LAMP MARKINGS
5. GENERAL REQUIREMENTS
6. INDIVIDUAL DEVICE REQUIREMENTS
7. GUIDELINES
8. GLOSSARY OF SAE TERMS TO
NON-SAE TERMS
9. NOTES
Pertains to road vehicles except motorcycles. It describes the commonalities of installation requirements for lighting and light signaling devices contained in the regulatory requirements and industry standards of North America, Japan, and the widely-adopted UNECE ('European') Regulations.
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Recommended Practice applies to road vehicles except motorcycles. It describes the commonalities of installation requirements for lighting and light signaling devices contained in the regulatory requirements and industry standards of North America, Japan, and the widely-adopted UNECE (\"European\") Regulations. It does not apply to installation of lighting and light signaling devices specific to special purpose vehicles, including but not limited to police, medical and other emergency or public service vehicles.This document does not carry force of law and does not replace regulatory requirements in effect at the time of application. It is subject to change to reflect additional experience, technical advances, and especially changes in government and industry documents used as references. Users of this document are advised to mind the applicable legal requirements in effect where their vehicles will be sold and registered.
| SAE J586_201605 | Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| SAE J2838_201303 | Full Adaptive Forward Lighting Systems |
| SAE J3069_201606 | Adaptive Driving Beam |
| SAE J592_200903 | Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall Width |
| SAE J1383_201005 | Performance Requirements for Motor Vehicle Headlamps |
| SAE J583_201609 | Front Fog Lamp |
| SAE J852_201707 | Front Cornering Lamps for Use on Motor Vehicles |
| SAE J585_201406 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| SAE J586_201605 | Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| CFR 49(PTS400-571) : OCT 2017 | TRANSPORTATION |
| SAE J578_201603 | Color Specification |
| SAE J1319_201510 | Rear Fog Lamp Systems |
| SAE J581_201102 | Auxiliary High Beam Lamps |
| SAE J588_201108 | Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| SAE J2338_201102 | Recommendations of the SAE Task Force on Headlamp Mounting Height |
| SAE J1432_201601 | Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width |
| SAE J1957_201108 | Center High Mounted Stop Lamp Standard for Vehicles Less than 2032 mm Overall Width |
| SAE J222_201303 | Front Position Lamp |
| SAE J2087_201606 | Daytime Running Light |
| ISO 2575:2010 | Road vehicles Symbols for controls, indicators and tell-tales |
| SAE J1735_201102 | Harmonized Vehicle Headlamp Performance Requirements |
| SAE J2584_201102 | Headlamp Mounting Height for Passenger and Pickup Truck Vehicles |
| SAE J2261_201607 | Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
| SAE J1373_201510 | Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length |
| SAE J852_200903 | Front Cornering Lamps for Use on Motor Vehicles |
| SAE J587_201206 | License Plate Illumination Devices (Rear Registration Plate Illumination Devices) |
| SAE J592_200903 | Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall Width |
| SAE J914_201408 | Side Turn Signal Lamps for Vehicles Less than 12 m in Length |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| SAE J2042_201402 | Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
| SAE J387_201404 | Terminology - Motor Vehicle Lighting |
| SAE J759_201404 | Lighting Identification Code |
| SAE J1383_201005 | Performance Requirements for Motor Vehicle Headlamps |
| ISO 303:2002 | Road vehicles Installation of lighting and light signalling devices for motor vehicles and their trailers |
| SAE J2039_201401 | Side Turn Signal Lamps for Long Vehicles |
| SAE J594_201002 | Reflex Reflectors |
| SAE J2009_201608 | Discharge Forward Lighting System and Subsystems |
| SAE J583_201609 | Front Fog Lamp |
| SAE J593_201606 | Backup Lamp (Reversing Lamp) |
| SAE J2041_201310 | Reflex Reflectors for Use on Vehicles 2032 mm or More in Overall Width |
| SAE J2040_201601 | Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.