SAE J2484_201212
Current
The latest, up-to-date edition.
Fastener Part Standard - Machine Screws
Hardcopy , PDF
English
07-12-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. MACHINE SCREW REQUIREMENTS
5. NOTES
This SAE Part Standard covers selected machine screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards.
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Part Standard covers selected machine screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part identification number (PIN) as defined in this document.
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| SAE AMS2412K | Plating, Silver Copper Strike, Low Bake |
| ASTM F 2328M : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric) |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| NAS1283:2014 | FASTENERS, MALE THREADED, SELF-LOCKING |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ASTM F 2328 : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| SAE J2280_199604 | SHIP SYSTEMS AND EQUIPMENT—FASTENERS—SELECTION AND IDENTIFICATION REQUIREMENTS |
| SAE AMS 2487 : 2000 | ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM |
| SAE J2295M_200606 | Fasteners—Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Metric) |
| SAE AMS 2485 : 2016 | COATING, BLACK OXIDE |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| ASME B18.6.3 : 2013 | MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES) |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.