SAE J518_201303
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE
Available format(s)
Hardcopy , PDF
Withdrawn date
05-10-2019
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. Scope
2. References
3. Size Designation
4. Dimensions and Tolerances
5. Material
6. Finish
7. Workmanship
8. Notes
Specifies complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to 4-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly.
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| MIL-DTL-52525-35 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-52525-44 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-43 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| BS EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| MIL-DTL-52525-36 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-52525-15 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| SAE J 1298 :2010(S2017) | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC PORT SIZES AND LOCATIONS |
| MIL-HDBK-2193 Base Document:1994 | HYDRAULIC SYSTEM COMPONENTS, SHIP |
| SAE J846:2023 | Coding Systems for Identification of Fluid Conductors and Connectors |
| SAE J 517 : 2017 | HYDRAULIC HOSE |
| SAE J 2093 : 1999 | DESIGN CONSIDERATIONS FOR WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE |
| CLC/TS 50537-3:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters |
| BS 7388:1991 | Guide for prevention of leaks from hydraulic fluid power systems |
| MIL-DTL-52525-13 Revision C:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| CSA S826 SERIES : 2001 : R2006 | FERRY BOARDING FACILITIES |
| CSA S826 SERIES : 2001 : R2016 | FERRY BOARDING FACILITIES |
| ASME B31.3:2016 | PROCESS PIPING |
| CEI CLC/TS 50537-3 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| MIL-DTL-52525-34 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| I.S. EN ISO 10439-1:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| SAE J 2613 : 2017 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
| MIL-DTL-52525-17 Revision C:2008 | FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| SAE J 1475 : 2014 | HYDRAULIC HOSE FITTING FOR MARINE APPLICATIONS |
| MIL-DTL-52525-16 Revision D:2008 | FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
| ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
| EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
| SAE J516_201604 | HYDRAULIC HOSE FITTINGS |
| MIL-DTL-52525-45 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-52525-14 Revision C:2008 | FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-DTL-52525-41 Revision A:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-42 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
| DD CLC/TS 50537-3:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| MIL-DTL-52525-40 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| S.R. CLC/TS 50537-3:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| SAE J 517 : 2016 | HYDRAULIC HOSE |
| SAE J 846 : 2015 | CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS |
| SAE J 429 : 2014 | MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS |
| SAE J 120 : 1995 | RUBBER RINGS FOR AUTOMOTIVE APPLICATIONS |
| SAE J 489 : 1992 | LOCK WASHERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.