SAE J759_201404
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LIGHTING IDENTIFICATION CODE
Available format(s)
Hardcopy , PDF
Superseded date
31-12-2017
Superseded by
Language(s)
English
Published date
01-01-2014
Publisher
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy |
SAE J 1889 : 2015 | L.E.D. SIGNAL AND MARKING LIGHTING DEVICES |
SAE J 2087 : 2017 | DAYTIME RUNNING LIGHT |
SAE J 2261 : 2016 | STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
SAE J 914 : 2014 | SIDE TURN SIGNAL LAMPS FOR VEHICLES LESS THAN 12 M IN LENGTH |
SAE J774_201102 | Emergency Warning Device and Emergency Warning Device Protective Container<br> |
SAE J 2591 : 2017 | LIMITED ADAPTIVE FORWARD LIGHTING SYSTEM |
SAE J 2111 : 2015 | HEADLAMP CLEANERS |
SAE J1133_201507 | SCHOOL BUS STOP ARM LAMP |
SAE J 2838 : 2013 | FULL ADAPTIVE FORWARD LIGHTING SYSTEMS |
SAE J 845 : 2013 | OPTICAL WARNING DEVICES FOR AUTHORIZED EMERGENCY, MAINTENANCE, AND SERVICE VEHICLES |
SAE J 3069 : 2016 | ADAPTIVE DRIVING BEAM |
SAE J 3098 : 2017 | FRONT DECORATIVE LAMP |
SAE J 2042 : 2014 | CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR ON-ROAD VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
SAE J 1319 : 2015 | REAR FOG LAMP SYSTEMS |
SAE J 2650 : 2013 | PERFORMANCE REQUIREMENTS FOR LIGHT EMITTING DIODE (LED) ROAD ILLUMINATION DEVICES |
SAE J 1306:2012(R2018) | MOTORCYCLE AUXILIARY FRONT LAMPS |
SAE J 1373 : 2015 | REAR CORNERING LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 9.1 M IN OVERALL LENGTH |
SAE J587_201711 | LICENSE PLATE ILLUMINATION DEVICES (REAR REGISTRATION PLATE ILLUMINATION DEVICES) |
SAE J 595 : 2014 | DIRECTIONAL FLASHING OPTICAL WARNING DEVICES FOR AUTHORIZED EMERGENCY, MAINTENANCE, AND SERVICE VEHICLES |
SAE J 1432 : 2016 | REAR HIGH MOUNTED STOP LAMPS AND REAR HIGH MOUNTED TURN SIGNAL LAMPS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
SAE J593_201606 | BACKUP LAMP (REVERSING LAMP) |
SAE J 2040 : 2016 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
SAE J 1383 : 2010 | PERFORMANCE REQUIREMENTS FOR MOTOR VEHICLE HEADLAMPS |
SAE J591_201102 | SPOT LAMPS |
MIL-PRF-32212 Revision A:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS |
MIL-PRF-32214 Base Document:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE FRONT PARK AND TURN SIGNAL LAMP, WITH INFRA-RED SECURE FRONT BLACKOUT MARKER LAMP |
MIL-PRF-32243 Base Document:2009 | Light Emitting Diode (LED) Military Driving Headlamp |
SAE J592_200903 | SIDEMARKER LAMPS FOR USE ON ROAD VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
SAE J852_201707 | FRONT CORNERING LAMPS FOR USE ON MOTOR VEHICLES |
SAE J 2595 : 2015 | PERFORMANCE REQUIREMENTS FOR SEALED BEAM MOTOR VEHICLE HEADLAMPS |
SAE J887_201507 | SCHOOL BUS WARNING LAMP |
SAE J 2442 : 2015 | HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES |
SAE J583_201609 | FRONT FOG LAMP |
SAE J 2282 : 2011 | DISTRIBUTED LIGHTING SYSTEMS (DLS) |
SAE J222_201303 | FRONT POSITION LAMP |
SAE J585_201406 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
SAE J 2510 : 2003 | HARMONIZED FRONT FOG LAMP |
SAE J 2039 : 2014 | SIDE TURN SIGNAL LAMPS FOR LONG VEHICLES |
SAE J586_201605 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
SAE J 1424 : 2014 | CARGO LAMPS FOR USE ON VEHICLES UNDER 5443 KG (12000 LB) GVWR |
SAE J 2041 : 2013 | REFLEX REFLECTORS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
SAE J 1623 : 2015 | OFF-HIGHWAY VEHICLE HEADLAMPS |
SAE J 2009 : 2016 | DISCHARGE FORWARD LIGHTING SYSTEM AND SUBSYSTEMS |
SAE J1319:2022 | Rear Fog Lamp System |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.