• There are no items in your cart

SAE MA 1339 : 2015

Current

Current

The latest, up-to-date edition.

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

27-07-2015

1 SCOPE
2 REFERENCES
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES

Describes the requirements for a lightweight polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in high temperature, 204 degrees C, high pressure, 21,000 kPa (210 bar), aircraft hydraulic systems, also for use in pneumatic systems which allow some gaseous diffusion through the PTFE wall.

Committee
G-3
DocumentType
Standard
Pages
24
PublisherName
SAE International
Status
Current
Supersedes

SAE AMS 5689 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br>
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE ARP 1835 : 2013 PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
ISO 5855-2:1999 Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts
SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ISO 5855-1:1999 Aerospace MJ threads Part 1: General requirements
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
QQ-P-35 Revision C:1988 PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
SAE AMS 5581 : 2010 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED TUBING, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), ANNEALED
NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
SAE MA 2014 : 2015 FITTING END, ACORN FLARELESS, DESIGN STANDARD, METRIC
MIL-PRF-7808 Revision L:1997 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
SAE AMS 5571J:2012(R2018) STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AMS 5643 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
SAE AMS 5697 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
SAE AMS 5690 : 2015 STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AMS 5573 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED
SAE AMS 5561 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC
SAE AS 1055 : 2013 FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
ISO 8829:1990 Aerospace Polytetrafluoroethylene (PTFE) hose assemblies Test methods
SAE MA 2273 : 2015 FITTING END, BEAM SEAL, EXTERNAL THREAD, DESIGN STANDARD, METRIC
SAE ARP 908 : 2013 TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
SAE MA 2095 : 2015 FITTING END, 24 DEGREES CONE, DESIGN STANDARD, METRIC
MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
MIL-STD-831 Base Document:1963 TEST REPORTS, PREPARATION OF
SAE AMS 5567 : 2015 STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED
SAE MA 2274 : 2015 FITTING END, BEAM SEAL, BULKHEAD, EXTERNAL THREAD, DESIGN STANDARD, METRIC
SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
ISO 5855-3:1999 Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems
SAE AMS 5688 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER
SAE MA 1370 : 2012 SCREW THREADS - MJ PROFILE, METRIC
SAE AS 1072F : 2013(S2019) SLEEVE, HOSE ASSEMBLY, FIRE PROTECTION
SAE AMS 5575 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AMS 5570 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED
QQ-S-763 Revision F:1996 STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
MIL-STD-100 Revision G:1997 ENGINEERING DRAWINGS
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
SAE MA 2078 : 1992 TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE), METRIC
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AIR 4092 : 2013 INVESTIGATION OF PTFE 'MELT' PHENOMENON FOR HIGH PRESSURE HOSES
MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
MIL-C-5501 Revision G:1989 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL
SAE AS 150 : 2014 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE
SAE AMS5644E:1964(S2017) STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL
SAE AMS 5653 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED
SAE AMS 5666H : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED
SAE AMS 5556 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED
MIL-F-85421 Revision B:1986 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR
SAE AMS 5557 : 2012 STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED

€131.37
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.