SAE AMS 5648 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
Hardcopy , PDF
14-10-2022
English
13-09-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.
Committee |
AMS-F
|
DocumentType |
Revision
|
Pages |
7
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
QQ-S-763 Revision F:1996 | Similar to |
MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
AN849 Revision 13:2015 | NIPPLE, HOSE |
AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
AN815 Revision 10:2015 | UNION - FLARED TUBE |
MS27637 Revision C:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
AN846 Revision 9:2013 | ELBOW, HOSE, 45 DEGREES |
MS27630 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 45 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
SAE AS 1472 : 2013 | HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER |
MIL-DTL-28748-17 Revision B:2016 | CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, HARDWARE FOR |
SAE AS 4468 G : 2017 | HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
AN841 Revision 7:2013 | ADAPTER - HOSE TO FLARED TUBE |
SAE AS 269J:2012:(S2018) | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
SAE AS 4444 : 2013 | FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
MS27628 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
MS27627 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
AN842 Revision 13:2013 | ELBOW - PIPE TO HOSE, 90 DEGREES |
AN844 Revision 13:2013 | ELBOW - PIPE TO HOSE, 45 DEGREES |
MS18194 Revision E:2012 | JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, LONG, TURNABLE |
AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
MIL-DTL-6001 Revision B:2013 | FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE |
SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
SAE AS 18280/1 : 2017 | SLEEVE, BITE TYPE, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
MS18195 Revision C:2012 | JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, SHORT TURNABLE |
MS18196 Revision G:2016 | JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED |
MIL V 24578 : B | VALVE, GLOBE, PRESSURE INSTRUMENT, STEM TEST CONNECTION, UNION END |
MS27636 Revision B:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
MS18197 Revision G:2016 | GUIDE PIN, ELECTRICAL CONNECTOR MALE AND FEMALE |
AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
MS18173 Revision B:2012 | Washer, Flat |
MS27631 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
SAE AS 1339 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
SAE AS 1227 : 2013 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
SAE AS 4707 : 2000 | TEST METHODS EVALUATION OF NONFLAMMABLE, CHLOROTRIFLUOROETHYLENE BASE HYDRAULIC FLUID |
SAE AS 5420 : 2017 | HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
MIL-DTL-24578 Revision C:2015 | Valves, Globe, Pressure Instrument, Stem Test Connection, Union End |
MS27629 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT |
SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
SAE MA 614 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
SAE AS 1946 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
SAE AMS 2241 : 2016 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE |
SAE AMS 2248 : 2016 | CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS |
ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
SAE AMS 2374 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
SAE AMS 2808 : 2017 | IDENTIFICATION FORGINGS |
SAE AMS 7490 : 2014 | RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
SAE AMS 2243 : 2013 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL TUBING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.