SAE MA 3375 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307
14-10-2019
01-01-2011
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Defines metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286.
| Committee |
E-25
|
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| NASM1312-10:2017 | FASTENER TEST METHODS METHOD 10 STRESS RUPTURE |
| SAE MA 1566 : 2012 | GAGING PRACTICE AND GAGE REQUIREMENTS FOR MJ METRIC SCREW THREADS |
| SAE AS 3062 : 2012 | BOLTS, SCREWS AND STUDS - SCREW THREAD REQUIREMENTS |
| MA1518B : 2012(R2018) | BOLTS, SCREWS & NUTS, EXTERNAL WRENCHING, METRIC THREADS - DESIGN PARAMETERS FOR |
| SAE AMS 2759/3 : 2015 | HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE MAP 1670 A : 2015 | STUDS, INSTALLATION PRACTICE FOR INTERFERENCE FIT - METRIC |
| SAE AMS 5734 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| NASM1312-6:2013 | FASTENER TEST METHODS, METHOD 6, HARDNESS |
| ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
| SAE MA 1370 : 2012 | SCREW THREADS - MJ PROFILE, METRIC |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| MA1520A : 2012(R2018) | AREAS FOR CALCULATING STRESS OR LOAD VALUES FOR METRIC MJ EXTERNALLY THREADED FASTENERS |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| NASM1312-13 : 2003 | FASTENER TEST METHODS - METHOD 13 - DOUBLE SHEAR TEST |
| NASM 1312-12 : 1997 | FASTENER TEST METHODS, METHOD 12, THICKNESS OF METALLIC COATINGS |
| NASM 1312-8 : 2001 | FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
| SAE AS 3063 : 2012 | BOLTS, SCREWS AND STUDS, GEOMETRIC CONTROL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.