SAE MA2005B
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Tube Fittings, Aerospace Fluid Systems, Separable, For 24° Cone, General Specification, Metric (ISO 7169)
Hardcopy , PDF
English
21-08-2015
06-07-2021
FOREWORD
1 SCOPE
2 REFERENCES
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES
Specifies performance and quality requirements for the qualification and manufacturer of 24 degree cone fittings to ensure reliable performance in aircraft hydraulic systems.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This document specifies performance and quality requirements for the qualification and manufacture of 24° cone fittings to ensure reliable performance in aircraft hydraulic systems.This document specifies baseline criteria for the design and manufacture of system fittings that are qualification tested on engines.This document covers fittings of temperature types and pressure classes specified in MA2001.
| Standards | Relationship |
| ISO 7169:2014 | Identical |
| SAE AIR5426 | Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
| SAE MA2007A | Hose Assembly, Tetrafluoroethylene, Lightweight, 204 °C, 21 000 kPa Hydraulic, Metric |
| SAE MA2060A | Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 21 000 kPa, Metric |
| SAE MA2126B | Hose Assembly, Polytetrafluoroethylene (PTFE), up to 232 °C and 10 500 kPa Procurement Specification, Metric (ISO/DIS 10502) |
| SAE MA2003 | Rotary Flexure Testing of Hydraulic Tubing Joints and Fittings |
| QQ-A-225-9 Revision E:1982 | Aluminum Alloy 7075, Bar, Rod, Wire and Special Shapes; Rolled, Drawn or Cold Finished (S/S by SAE-AMS-QQ-A-225 and ASTM-B211) |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu |
| QQ-P-35 Revision C:1988 | Passivation Treatments for Corrosion-Resistant Steel (S/Sby ASTM-A967or SAE-AMS-QQ-P-35) |
| MIL-F-18280 Revision F:1995 | Fittings, Flareless Tube, Fluid Connection (S/S by SAE-AS18280) |
| MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION (S/S BY SAE-AMS-T-6845) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| ISO 6771:2007 | Aerospace — Fluid systems and components — Pressure and temperature classifications |
| SAE AMS5561G | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic |
| SAE AS1055D | Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| QQ-A-367 Revision H:1973 | Aluminum Alloy Forgings (S/S by SAE-AMS-QQ-A-367) |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE (S/S BY SAE-AMS-T-9046) |
| QQ A 225/6 : E | ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN OR COLD FINISHED, 2024 |
| ISO 6772:2012 | Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| SAE AMS4952F | Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2Mo |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| MIL-I-6868 Revision E:1976 | Inspection Process, Magnetic Particle (S/S by MIL-STD-1949) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| SAE MA2094 | Test Methods for Tube-Fitting Assemblies, Metric (ISO 10583) |
| ISO 7257:2016 | Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (S/S BY SAE-AMS-S-6758) |
| ISO 9538:2017 | Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test |
| QQ S 637 : A | STEEL BAR, CARBON, COLD FINISHED (STANDARD QUALITY, FREE MACHINING) |
| QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| MIL-T-7081 Revision D:1965 | TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN 6061, AIRCRAFT HYDRAULIC QUAL ITY (S/S BY SAE-AMS-T-7081) |
| ISO 8575:2016 | Aerospace — Fluid systems — Hydraulic system tubing |
| SAE AMS4928V | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.