SAE MS1011_201808
Current
Current
The latest, up-to-date edition.
Lubricants, Industrial Oils, and Related Products - Type X (Greases) - Specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
29-08-2018
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. REFERENCES
3. CONCEPT
4. REQUIREMENTS AND TESTING
5. NOTES
Specifies according to the operating conditions under which they are used, because the versatile nature of greases makes it impractical to classify them according to end use.
| DocumentType |
Standard
|
| Pages |
16
|
| ProductNote |
THIS STANDARD ALSO REFERS TO DIN 51 806 This version is now stabilized
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
The greases have been classified according to the operating conditions under which they are used, because the versatile nature of greases makes it impractical to classify them according to end use. It will therefore be necessary to consult the supplier to be certain that the grease can be used in; for example, rolling bearings or pumped supply systems, and also concerning the compatibility of products (see Remarks in Table 1).
| SAE MS1002_201710 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| SAE MS1005_201708 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| SAE MS1003/2_200401 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils – Specification - Addendum |
| SAE MS1006_201803 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| SAE MS1010_201212 | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification |
| SAE MS1003_201803 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| SAE MS1007_201204 | Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants - Specification |
| SAE MS1000_201302 | Lubricants, Industrial Oils, and Related Products - Classification |
| SAE MS1001_201708 | Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| SAE MS1003_201202 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| SAE MS1008_200701 | Lubricants, Industrial Oils and Related Products Type M (Metal Removal Fluids)—Specification |
| DIN 51811:2013-11 (Draft) | TESTING OF LUBRICANTS - TESTING OF CORROSIVENESS TO COPPER OF GREASES - COPPER STRIP TARNISH TEST |
| ISO 2977:1997 | Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point |
| BS 4385-1(1991) : AMD 8663 | METHODS FOR DETERMINATION OF WATER IN CRUDE PETROLEUM, PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION |
| DIN 51808:2015-11 (Draft) | TESTING OF LUBRICANTS - DETERMINATION OF OXIDATION STABILITY OF GREASES - OXYGEN METHOD |
| IP 134 : 83(R1992) | DETERMINATION OF FOREIGN PARTICULATE MATTER IN LUBRICATING GREASE - MICROSCOPIC COUNTING METHOD |
| SAE MS1010_201212 | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification |
| SAE MS1002_201012 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 8681:1986 | Petroleum products and lubricants Method of classification Definition of classes |
| ASTM D 566 : 2017 : REDLINE | Standard Test Method for Dropping Point of Lubricating Grease |
| ISO/TR 3498:1986 | Lubricants, industrial oils and related products (class L) — Recommendations for the choice of lubricants for machine tools |
| DIN 51807-2:1990-03 | TESTING OF LUBRICANTS; TEST ON THE BEHAVIOUR OF GREASES IN THE PRESENCE OF WATER; DYNAMIC TESTS |
| IP 132 : 96(R2004) | PETROLEUM PRODUCTS - LUBRICATING GREASE - DETERMINATION OF DROPPING POINT |
| DIN 51817:2014-08 | Testing of lubricants - Determination of oil separation from greases under static conditions |
| SAE MS1000_201302 | Lubricants, Industrial Oils, and Related Products - Classification |
| ASTM D 4290 : 2015 : REDLINE | Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions |
| ASTM D 942 : 2015 : REDLINE | Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
| ISO 2137:2007 | Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum |
| DIN 51802:2013-12 (Draft) | TESTING OF LUBRICANTS - TESTING OF THE RUST-PREVENTION PROPERTIES OF GREASES - SKF-EMCOR-METHOD |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| SAE MS1005_201006 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| DIN 51813:2016-03 | Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ?m |
| SAE MS1004_201010 | Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification |
| DIN 51805:1974-08 | TESTING OF LUBRICANTS; DETERMINATION OF FLOW PRESSURE OF LUBRICATING GREASES, KESTERNICH METHOD |
| DIN 51787:1978-07 | TESTING OF MINERAL OIL HYDROCARBONS; DETERMINATION OF ANILINE POINT AND MIXED ANILINE POINT OF DARK MINERAL OIL HYDROCARBONS |
| IP 5 : 1942 | ASH FROM GREASE |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
| ASTM D 4048 : 2017-01 | TEST METHOD FOR DETECTION OF COPPER CORROSION FROM LUBRICATING GREASE |
| DIN 51350-5:2015-03 | TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 5: DETERMINATION OF WEARING CHARACTERISTICS FOR CONSISTENT LUBRICANTS |
| ASTM D 2595 : 2017 | Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
| DIN 51775:1978-07 | TESTING OF MINERAL OIL HYDROCARBONS; DETERMINATION OF ANILINE POINT & MIXED ANILINE POINT OF BRIGHT MINERAL OIL HYDROCARBONS |
| SAE MS1007_200105 | Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants --- Specification |
| IP 326 : 2015 | DETERMINATION OF EXTREME PRESSURE PROPERTIES OF GREASE - TIMKEN METHOD |
| DIN 51350-4:2015-03 | TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 4: DETERMINATION OF WELDING LOAD OF CONSISTENT LUBRICANTS |
| ASTM D 128 : 1998 | Standard Test Methods for Analysis of Lubricating Grease |
| ISO 6743-0:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 0: General |
| SAE MS1009_201207 | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification |
| ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| SAE MS1006_201112 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
| ASTM D 2265 : 2015-05 | TEST METHOD FOR DROPPING POINT OF LUBRICATING GREASE OVER WIDE TEMPERATURE RANGE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.