• Shopping Cart
    There are no items in your cart

SAEITC TS153-2

Current

Current

The latest, up-to-date edition.

TS153 Performance Specification of Insert Salvage, Imperial, Thinwall Screw Locking, Inconel 718 Silver Coated

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-12-2004

€172.29
Excluding VAT

1 Scope and field of application
2 References
3 Definitions
  3.1 Production batch
  3.2 Inspection lot
  3.3 Discontinuities
  3.4 Test temperature
  3.5 Simple random sampling
  3.6 Critical defect
  3.7 Major defect
  3.8 Minor defect
  3.9 Sampling plan
  3.10 Limiting quality
  3.11 Acceptable quality level
  3.12 Finished insert
  3.13 Definition document
  3.14 Self locking torque
  3.15 Seating torque
  3.16 Unseating torque
  3.17 Breakaway torque
4 Certification and quality assurance
  4.1 Qualification
  4.2 Acceptance
  4.3 Quality system certification
  4.4 Responsibility for inspection and tests
  4.5 Inspection and test report
5 Table 1: Technical requirement and test methods
  5.1 Materials
  5.2 Dimensions; tolerances of form and position;
       threads and quality
  5.3 Manufacturing
  5.4 Mechanical properties
  5.5 Metallurgical properties
  5.6 Product identification
  5.7 Delivery
Table 2: Summary of tests - Qualification and production
         acceptance
Table 3: Qualification testing requirements for insert
         samples
Table 4: Load values for rotational resistance tests
Table 5: Values for breakaway torque; locking torque and
         assembly torque
Table 6: Classification of defects
Table 7: Sampling plans for visual inspections and
         dimensional characteristics
Table 8: Sampling plans for the inspection of mechanical
         and metallurgical characteristics
Table 9: Maximum depth of permissible discontinuities
Appendix 1 - Limitation of liability

Provides the technical qualification and quality assurance requirements for thin wall self locking salvage inserts in material NI P100HT (INCO718) of tensile strength class 1275 MPa at room temperature, maximum test temperature of parts 550 degree C.

DocumentType
Standard
Pages
23
PublisherName
SAE Industry Technologies Consortia
Status
Current

BS 4084:1996 UNJ threads, with controlled root radius, for aerospace. Inch series
ISO 3534:1977 Statistics — Vocabulary and symbols
MIL L 7808 : K (1) LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
ISO 2859:1974 Sampling procedures and tables for inspection by attributes
DTD 939 : MAR 66 SILVER PLATING OF HEAT RESISTANT THREADED PARTS FOR ANTI SEIZURE PURPOSES
ISO 3453:1984 Non-destructive testing — Liquid penetrant inspection — Means of verification
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
ISO 3452:1984 Non-destructive testing — Penetrant inspection — General principles
SAE AMS2411H Plating, Silver for High Temperature Applications
DTD 5638 : JUL 85 HEAT RESISTING NICKEL BASED ALLOY FE-52.5 NI-19 CR-3 MO-5 (N6+TA)-0.9 TI-0.5 AL (VACUUM MELTED) BAR AND WIRE FOR FASTENERS MAXIMUM DIAMETER OR SECTIONAL DIMENSION 50 MM
ISO 8642:2008 Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.