SAEITC TS156-2

1 Scope and field of application
2 References
3 Definitions
  3.1 Production Batch
  3.2 Inspection Lot
  3.3 Discontinuities
  3.4 Test Temperature
  3.5 Simple Random Sampling
  3.6 Critical Defect
  3.7 Major Defect
  3.8 Minor Defect
  3.9 Sampling Plan
  3.10 Limiting Quality
  3.11 Acceptable Quality Level
  3.12 Finished Insert
  3.13 Definition Document
  3.14 Self Locking Torque
  3.15 Seating Torque
  3.16 Unseating Torque
  3.17 Breakaway Torque
4 Certification and quality assurance
  4.1 Qualification
  4.2 Acceptance
  4.3 Quality System Certification
  4.4 Responsibility for Inspection and Tests
  4.5 Inspection and Test Report
5 Table 1: Technical requirement and test methods
  5.1 Materials
  5.2 Dimensions; tolerances of form and position;
       threads and quality
  5.3 Manufacturing
  5.4 Mechanical Properties
  5.5 Metallurgical Properties
  5.6 Product Identification
  5.7 Delivery
Table 2: Summary of tests - Qualification and production
         acceptance
Table 3: Qualification testing requirements for insert
         samples
Table 4: Load values for rotational resistance tests
Table 5: Values for breakaway torque; locking torque and
         assembly torque
Table 6: Classification of defects
Table 7: Sampling plans for visual inspections and
         dimensional characteristics
Table 8: Sampling plans for the inspection of mechanical
         and metallurgical characteristics
Table 9: Maximum depth of permissible discontinuities
Appendix 1 - Limitation of liability

Covers the technical qualification and quality assurance requirements for thin wall self locking inserts in material NI P100HT (INCO718) of tensile strength class 1275 MPa at room temperature, maximum test temperature of parts 550 degree C.