SD 6 : 20140201
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS
Withdrawn date
21-08-2023
Publisher
Sorry this product is not available in your region.
CHAPTER 1: THE QUALIFICATION PROGRAM
CHAPTER 2: QUALIFICATION POLICIES
CHAPTER 3: THE QUALIFICATION PROCESS
CHAPTER 4: QUALIFICATION TESTING PROVISIONS
APPENDIX A: DEFINITIONS
APPENDIX B: ACRONYMS
Defines provisions which are issued as guidance for manufacturers and their authorized distributors who wish to submit products for qualification by the Department of Defense. A product may be qualified only when a governing federal or defense specification or non-government standard contains a requirement for qualification. Lists are not otherwise established for qualification.
| Committee |
AREA STDZ
|
| DocumentType |
Standard
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
| SAE AS95234 | Connectors, Electrical, Reverse Bayonet, General Specification For |
| MIL-DTL-83140 Revision B:2014 | WIRE ROPE: STAINLESS STEEL, PREFORMED, ROTATION RESISTANT, FOR AIRCRAFT RESCUE HOIST, UTILITY HOIST AND WINCHING |
| MIL-DTL-25959 Revision H:2012 | TIE DOWN, TENSIONERS, CARGO, AIRCRAFT |
| MIL-PRF-32517 Base Document:2015 | SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR |
| MIL-B-18013 Revision B:1994 | BATTERY, STORAGE, SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL-DTL-27188 Revision C:2006 | INDICATOR, PRESSURE EGU-2/A, OIL, 0-100 PSI |
| MIL-DTL-32546 Base Document:2016 | Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for |
| MIL-DTL-85052-14 Base Document:2017 | Clamp, Loop, Stainless Steel, 500 Degrees F, Silicone Rubber, Fabric Reinforced |
| MIL-DTL-8878 Revision L:2014 | TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
| SAE AS85485B | Cable, Electric, Filter Line, Radio Frequency Absorptive |
| SAE AS95234A | Connectors, Electrical, Reverse Bayonet, General Specification for |
| MIL-DTL-7788 Revision H:2011 | PANELS, INFORMATION, INTEGRALLY ILLUMINATED |
| MIL-DTL-781 Revision J:2014 | TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR |
| MIL-DTL-32266 Base Document:2008 | Wire Rope, 1.5 Inch Diameter, Galvanized, Compacted Strand, for Aircraft Elevator |
| MIL-DTL-85052-9 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 550 DEGREES F, POLY-TETRAFLUOROETHYLENE (PTFE) |
| MIL-DTL-85052-5 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 275 DEGREES F, ETHYLENE PROPYLENE |
| MIL-PRF-6081 Revision E:2014 | Lubricating Oil, Jet Engine |
| SAE AS 5768 : 2013 | TOOL, STRIPPER, ELECTRICAL INSULATION, GENERAL SPECIFICATION FOR |
| SAE AS21608A | Ferrule, Shield Terminating, Crimp Style |
| SAE AS85028C | Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For |
| SAE AS81306A | Wiring Installation Tools for Bands and Tiedown Straps |
| SAE AS23053 | Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For |
| MIL-DTL-85052-10 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 275 DEGREES F, NITRILE BUTADIENE RUBBER FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
| MIL-DTL-85052-6 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 400 DEGREES F, FLUOROSILICONE |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| MIL-DTL-85052-12 Base Document:2017 | Clamp, Loop, Stainless Steel, 400 Degrees F, Fluorosilicone |
| MIL-DTL-10215 Revision M:2010 | SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE SHAFT ASSEMBLY CORES AND ADAPTERS |
| MIL-DTL-87218 Revision E:2012 | Cable, Lockclad, for Aircraft Control |
| MIL-DTL-85052-11 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees F, Side Lock, Ethylene Propylene |
| MIL-A-81852 Revision A:1986 | ALTIMETER-ENCODER AAU-32/A |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| MIL-DTL-85052-8 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 500 DEGREES F, SILICONE RUBBER, FABRIC REINFORCED |
| MIL-PRF-24453 Revision B:2008 | INHIBITOR, CORROSION, SOLUBLE OIL |
| MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| SAE MA5405B | Splices, Fiber Optics, For Aerospace Inter-Connection Systems |
| MIL-DTL-7990 Revision D:2012 | Transmitter, Temperature, Electrical Resistance, -70 Degrees to +300 Degrees C |
| SAE AS81703A | Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting |
| SAE AS 81659 : 2017 | CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-6117 Revision L:2008 | WIRE ROPE ASSEMBLIES, AVIATION, SWAGED TYPE |
| MIL-DTL-22442 Revision G:2009 | CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR |
| MIL-DTL-32385 Base Document:2011 | CONNECTOR, RECEPTACLES, PLUGS, ADAPTER, USED ON ELECTROLUMINESCENT, EMBEDDED, AND PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS |
| MIL-DTL-9320 Revision E:2010 | Signal, Warning, Audible, for Headset, Type MA-1 |
| MIL-DTL-5498 Revision G:2013 | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| SAE AS60491 | Sleeve, Protection, For Cable and Harness Protection |
| MIL-DTL-25446 Revision E:2012 | Transmitter, Temperature, Electrical Resistance, Armored, Bayonet Locking Type, (-50 Degrees C to 300 Degrees C) |
| MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
| MIL-DTL-24577 Revision A:2007 | DISTILLER SCALE PREVENTIVE TREATMENT FORMULATIONS |
| MIL-DTL-85052-15 Base Document:2017 | Clamp, Loop, Stainless Steel, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE) |
| SAE AS55941A | Switches, Toggle, Electrically Held, Sealed, General Specification For |
| SAE AS 81969 : 2016 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| SAE AS58091A | Circuit Breakers, Trip-Free, Aircraft General Specification For |
| MIL-DTL-5508 Revision C:2007 | FUSES, AIRCRAFT AUTOMATIC QUANTITY-MEASURING, HYDRAULIC |
| MIL-DTL-9398 Revision D:2007 | GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
| MIL-DTL-29576 Revision B:2007 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, WELDED |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| MIL-A-85505 Base Document:1983 | ALTIMETER, STANDBY, TYPES 1 AND 2 |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| MIL-DTL-85052-13 Base Document:2017 | Clamp, Loop, Stainless Steel, 212 Degrees F, Chloroprene |
| SAE AS6070 | Aerospace Cable, High Speed Data, Copper |
| MIL-DTL-7077 Revision D:2011 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEGREES C TO 150 DEGREES C, 2-INCH SIZE |
| MIL-DTL-6839 Revision E:2011 | INDICATOR, POSITION, LANDING GEAR |
| MIL-DTL-85052-16 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees Fahrenheit, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant |
| MIL-DTL-83420 Revision P:2017 | WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
| MIL-DTL-27190 Revision C:2006 | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-DTL-6856 Revision D:2006 | INDICATOR, PRESSURE, SYNCHRO, 1-1/2 INCH |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-DTL-85052-7 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 212 DEGREES F, CHLOROPRENE |
| SAE AS81824D | Splice, Electric, Crimp, Copper, Environment Resistant |
| SAE AS29606 | Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification For |
| SAE AS83519C | Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For |
| SAE AS5259 | Crimping Tool and Accessories, Electrical, Size 8 to 700 KCMIL, General Purpose Use, Die and Dieless |
| SAE AS 6224 : 2015 | WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
| SAE AS39029D | Contacts, Electrical Connector, General Specification For |
| SAE AS81714B | Terminal Junction System (TJS), Environment Resistant General Specification For |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.