SR 3337 : ISSUE 3
Current
The latest, up-to-date edition.
GUIDELINES FOR ORDERING AND PROVISIONING CARRIER-TO-CARRIER ATM INTERCONNECTIONS
12-01-2013
1 Introduction
1.1 Intended Audience and Scope
1.2 Purpose
1.3 Terminology
1.4 Carrier-to-Carrier ATM Interconnections, and the ATM
Forum's B-ICI
1.5 Key Related Documents
1.6 Organization
2 General Ordering and Provisioning Guidelines
2.1 Ordering and Provisioning Background
2.1.1 Service Negotiation (Including the ASOG Process)
2.1.2 Issuance and Confirmation of the Design Layout
Report (DLR)
2.1.3 Pre-Service Testing
2.2 Ordering and Provisioning of a Multiservice ATM
Interconnection: A Layered Approach
2.3 Interim Procedures for Ordering ATM Interconnection
2.4 Long-Term Procedures for Ordering ATM Interconnection
2.4.1 Overview of Relevant Standards Committees
and Forums
2.4.2 Current and Future Directions in the OBF
3 ATM Background, and Interconnection Configurations
3.1 ATM Background
3.1.1 ATM Technology and Services
3.1.2 ATM Virtual Paths and Virtual Channels
3.1.3 ATM Service Classes, and Service Categories
3.1.4 The ATM Adaptation Layer (AAL)
3.1.5 ATM QoS Classes
3.1.6 PVCs and SVCs
3.2 ATM Interconnection Configurations
4 Ordering and Provisioning a Physical ATM Interface
4.1 Physical-Level Parameters
4.2 Per Physical Interface ATM Parameters
5 Ordering and Provisioning ATM PVC Connections
5.1 PVC Ordering and Provisioning Procedures
5.2 ATM PVC Parameters
5.3 Additional ATM PVC Information
6 Ordering and Provisioning XA-PVC-CRS
7 Ordering and Provisioning XA-PVC-FRS Over and ATM Connection
7.1 Frame Relay Overview
7.2 Ordering and Provisioning Procedures
7.3 Parameters of an ATM PVC that Supports XA-PVC-FRS
7.4 AAL5 and FRS-Specific Parameters for XA-PVC-FRS over ATM
8 Ordering and Provisioning XA-PVC-CES Over an ATM Connection
8.1 CES Overview
8.2 Ordering and Provisioning Procedures
8.3 Parameters of an ATM PVC that Supports XA-PVC-CES
8.4 AAL1 and CES-Specific Parameters for XA-PVC-CES over ATM
9 Ordering and Provisioning XA-SMDS Over an ATM Connection
9.1 SMDS Overview
9.2 Ordering and Provisioning Procedures
9.3 Parameters of an ATM PVC that Supports XA-SMDS
9.4 AAL3/4 and SMDS-Specific Parameters for XA-SMDS over ATM
10 Ordering and Provisioning Signaling Links, and the VPCs They
Control
10.1 Signaling Overview
10.2 Provisioning a BISUP Signaling Link Over an ATM PVC
10.2.1 Parameters of an ATM PVC that Supports Signaling
10.2.2 AAL5 and Signaling-Specific Parameters
10.3 Specifying the VPCs Controlled by a BISUP Signaling Link
Appendix A Summary of ATM Parameters
Appendix B Relationship To Parameters in Other Documents
References
Acronyms
List of Figures
Figure 2-1 Layered Ordering of a Multiservice ATM Interconnection
Figure 2-2 Ordering Example
Figure 2-3 Key Standards Committees and Industry Forums
Figure 3-1 Virtual Channel Connections
Figure 3-2 Virtual Path Connections
Figure 3-3 Defining Characteristics of Service Classes
Figure 3-4 Example ATM Interconnections Between Different Carrier
Networks
Figure 3-5 Multiservice ATM Interconnection
Figure 3-6 Different Inter-Carrier Services Sharing a Common
Transmission Path
Figure 4-1 Different B-ICIs Defined by ATM Forum
Figure 4-2 Identification of Selected Ordering and
Provisioning Terms
Figure 5-1 Individual ATM Connections Within a Physical ATM Interface
Figure 7-1 Carrier-to-Carrier Interfaces Supporting Frame Relay
Service
Figure 7-2 Protocol Stack for FRS over ATM
Figure 8-1 Examples of DS1 and DS3 Circuit Emulation Service
Figure 9-1 Example Architecture Supporting SMDS
Figure 9-2 Protocol Stack for SMDS Over ATM
Figure 10-1 The Associated Mode of Inter-office Signaling
Figure 10.2 Protocol Stack for Signaling Link Using Associated
Mode Signaling
List of Tables
Table 5-1 Required Parameters for Policing Algorithm(s)
Table 5-2 Conformance Definitions in Traffic Management
4.0 Specification
Table 5-3 Additional Conformance Definitions, Derived from
UNI 3.1 Specification
Table 9-1 Related SMDS Requirements Documents
Table A-1 Summary of Per-Interface ATM Parameters
Table A-2 Summary of Per-Order ATM Parameters
Table A-3 Summary of Per-PVC ATM Parameters
Table B-1 Relationship Between ATM Terms in This Document and
ATM Forum's M4 NE View
Table B-2 Relationship Between ATM Terms in This Document and
OBF Terms
This document is limited to provisioning/ordering Asynchronous Transfer Mode (ATM) interconnections between different carrier networks. It does not include the end-to-end ATM connections by any one carrier on behalf of an end customer for provisioning/ordering.
DocumentType |
Standard
|
PublisherName |
Telcordia Technologies
|
Status |
Current
|
GR 1110 CORE : ISSUE 4 | BROADBAND SWITCHING SYSTEM (BSS) GENERIC REQUIREMENTS |
SR STS 000307 : ISSUE 7 | NC/NCI CODE DIRECTORY |
GR 1248 CORE : ISSUE 4 | GENERIC REQUIREMENTS FOR OPERATIONS OF ATM NETWORK ELEMENTS |
TR TSV 001370 : ISSUE 1 | GENERIC REQUIREMENTS FOR EXCHANGE ACCESS FRAME RELAY PVC SERVICE |
TR NWT 001112 : ISSUE 1 | BROADBAND ISDN USER TO NETWORK INTERFACE AND NETWORK NODE INTERFACE PHYSICAL LAYER GENERIC CRITERIA |
GR 1115 CORE : ISSUE 2 | BISDN INTER CARRIER INTERFACE (B-ICI) GENERIC REQUIREMENTS |
SR STS 471000 : REV 3 | ACCESS SERVICE ORDERING GUIDELINES |
SR 3330 : ISSUE 2 | CELL RELAY SERVICE CORE FEATURES |
GR 1113 CORE : ISSUE 1 | ASYNCHRONOUS TRANSFER MODE (ATM) AND ATM ADAPTATION LAYER (AAL) PROTOCOLS |
GR 1060 CORE : ISSUE 1 | SWITCHED MULTI-MEGABIT DATA SERVICE (SMDS) GENERIC REQUIREMENTS FOR EXCHANGE ACCESS AND INTERCOMPANY SERVING ARRANGEMENTS |
GR 1417 CORE : ISSUE 5 | BROADBAND SWITCHING SYSTEM SS7 GENERIC REQUIREMENTS |
SR STS 000304 : ISSUE 3 | INDUSTRY SUPPORT INTERFACE (ISI): DLR-ISI (DESIGN LAYOUT REPORT) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.