SSPC-SP 6 (WAB) : 2015
Current
The latest, up-to-date edition.
COMMERCIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 6 (WAB)/NACE WAB-3)
Hardcopy , PDF
English
23-08-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. GENERAL
2. DEFINITION
3. ADDITIONAL TECHNICAL CONSIDERATIONS
4. ASSOCIATED DOCUMENTS
5. PROCEDURES BEFORE WET ABRASIVE BLAST CLEANING
6. WET ABRASIVE BLAST CLEANING METHODS
7. WET ABRASIVE BLAST CLEANING MATERIALS
8. PROCEDURES FOLLOWING WET ABRASIVE BLAST CLEANING
AND IMMEDIATELY BEFORE COATING
REFERENCES
APPENDIX A: EXPLANATORY NOTES (NONMANDATORY)
APPENDIX B: PROCEDURES AND PROCESS CONTROLS
(NONMANDATORY)
APPENDIX C: METHODS OF ASSESSING THE DEGREE OF FLASH
RUST (NONMANDATORY)
Specifies the process for preparing a carbon steel surface to the Commercial degree of surface cleanliness using a wet abrasive blast (WAB) method of cleaning.
| DevelopmentNote |
Jointly published by SSPC and NACE. Also numbered as NACE SP 08 15. (03/2016)
|
| DocumentType |
Standard
|
| ISBN |
1-57590-324-5
|
| Pages |
10
|
| PublisherName |
The Society for Protective Coatings
|
| Status |
Current
|
| SSPC-SP 5 (WAB) : 2015 | WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
| SSPC-SP 7 (WAB) : 2015 | BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4) |
| SSPC-SP 10 (WAB) : 2015 | NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2) |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| SSPC-PS 26.00 : 2016 | Aluminum-Pigmented Epoxy Coating System Materials Standard, Performance-Based; Type I for Use Over Blast Cleaned Steel; Type II for Use Over Hand-Cleaned Steel |
| SSPC-SP 14 (WAB) : 2015 | INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8) |
| NACE SP 10 15 : 2015 | BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4) |
| NACE SP 06 15 : 2015 | NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2) |
| NACE SP 07 15 : 2015 | WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
| NACE SP 09 15 : 2015 | INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8) |
| SSPC-SP 10 (WAB) : 2015 | NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2) |
| NACE WJ 3 : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING |
| ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| NACE SP 01 78 : 2007 | DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE |
| NACE WJ 2 : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
| ASTM D 4417 : 2014 : REDLINE | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| SSPC-SP WJ 4 : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
| NACE 6G186 : 0 | SURFACE PREPARATION OF SOLUBLE SALT CONTAMINATED STEEL SUBSTRATES PRIOR TO COATING |
| SSPC-SP 7 (WAB) : 2015 | BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4) |
| ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| SSPC-SP WJ 2 : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
| NACE WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| NACE SP 10 15 : 2015 | BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4) |
| SSPC-SP WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| SSPC-SP WJ 3 : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING |
| SSPC-GUIDE 15 : 2013 | FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES |
| SSPC-AB 1 : 2015 | MINERAL AND SLAG ABRASIVES |
| NACE 6G198 : 0 | WET ABRASIVE BLAST CLEANING |
| NACE SP 07 15 : 2015 | WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
| NACE VIS 9 : 2001 | GUIDE AND REFERENCE PHOTOGRAPHS FOR STEEL SURFACES PREPARED BY WET ABRASIVE BLAST CLEANING |
| NACE WJ 4 : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
| SSPC-SP 5 (WAB) : 2015 | WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
| NACE VIS 7 : 2001 | GUIDE AND VISUAL REFERENCE PHOTOGRAPHS FOR STEEL CLEANED BY WATERJETTING |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| NACE SP 09 15 : 2015 | INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8) |
| SSPC-SP 14 (WAB) : 2015 | INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8) |
| NACE SP 06 15 : 2015 | NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.