TAPPI T 205 : 2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FORMING HANDSHEETS FOR PHYSICAL TESTS OF PULP
Hardcopy , PDF
English
01-01-2006
23-11-2018
1 Scope
2 Significance
3 Apparatus
4 Sampling
5 Storage of pulp samples
6 Test specimen
7 Procedure
8 Keywords
9 Additional information
Appendix A: Specification and care of apparatus
Appendix B: Board stock
Appendix C: Rapid methods of drying and conditioning
Appendix D: Sheet shrinkage
Specifies a method of forming test handsheets at an oven dry weight of 60 g/m[2] for determining the physical properties of pulp. The procedure can be used for both unrefined and refined pulps. Appendix B describes a modified procedure for making heavier weight sheets for pulps intended for use in paperboard manufacture.
| DocumentType |
Standard Practice
|
| Pages |
9
|
| PublisherName |
Technical Association of the Pulp & Paper Industry
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| TAPPI UM 3 : 2010 | DETERMINATION OF USEFUL FIBER IN BAGASSE |
| TAPPI T 271 : 2012(R 2018) | FIBER LENGTH OF PULP AND PAPER BY AUTOMATED OPTICAL ANALYZER USING POLARIZED LIGHT |
| TAPPI T 830 : 2011 | INK RUB TEST OF CONTAINER BOARD AND CORRUGATED BOARD |
| TAPPI T 218 : 2011 | FORMING HANDSHEETS FOR REFLECTANCE TESTS OF PULP (BUCHNER FUNNEL PROCEDURE) |
| TAPPI UM 658 : 2010 | COLOR STRENGTH AND SHADE OF DYE |
| TAPPI T 200 : 2010 | LABORATORY BEATING OF PULP (VALLEY BEATER METHOD) |
| TAPPI T 246 : OM 89 | FOREIGN PARTICULATE MATTER IN PULP BY TRANSMITTED LIGHT |
| ASTM D 6942 : 2003 | Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
| ASTM D 6148 : 1997 | Standard Practice for the Separation and Examination of Stickies |
| TAPPI UM 258 : 2010 | LABORATORY PROCESSING OF PULP (KOLLERGANG METHOD) |
| TAPPI UM 566 : 2010 | WETTING SHIPPING SACK PAPER FOR TESTING |
| ASTM D 6148 : 1997 : R2002 | Standard Practice for the Separation and Examination of Stickies |
| TAPPI/ANSI T 272 sp:2012 | FORMING HANDSHEETS FOR REFLECTANCE TESTING OF PULP (SHEET MACHINE PROCEDURE) |
| TAPPI T 200 : 2010 : R2015 | LABORATORY BEATING OF PULP (VALLEY BEATER METHOD) |
| TAPPI T 276 : 0 | DEGREE OF FIBER BONDING INDEX BY SHORT-SPAN TENSILE TESTING |
| TAPPI T 278 : 2004 | PULP SCREENING (VALLEY-TYPE SCREENING DEVICE) |
| ASTM D 7357 : 2007 | Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete |
| TAPPI T 491 : 2013 | WATER IMMERSION NUMBER OF PAPERBOARD |
| TAPPI T 279 : 0 | EFFECTIVE FIBER LENGTH INDEX BY ZERO/SHORT-SPAN TENSILE TESTING |
| ASTM D 6942 : 2003 : R2012 | Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
| ASTM D 6942 : 2003 : R2008 | Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
| ASTM D 5999 : 1996 | Standard Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003) |
| TAPPI T 507 : 1999 | GREASE RESISTANCE OF FLEXIBLE PACKAGING MATERIALS |
| TAPPI T 274 : 2013 | LABORATORY SCREENING OF PULP (MASTERSCREEN-TYPE INSTRUMENT) |
| TAPPI T 275 : 2012 | SCREENING OF PULP (SOMERVILLE-TYPE EQUIPMENT) |
| TAPPI UM 205 : 2010 | DIRT IN PULP (MEASURED BY TRANSMITTED LIGHT) |
| TAPPI UM 253 : 2010 | LABORATORY PROCESSING OF PULP (BALL OR PEBBLE-MILL METHOD) |
| TAPPI T 251 : CM 85 | AIR PERMEABILITY OF POROUS PAPER, FABRICS, AND PULP HANDSHEETS |
| TAPPI T 432 : 2009 | WATER ABSORBENCY OF BIBULOUS PAPERS |
| TAPPI UM 213 : 2012 | REPULPABILITY OF SPLICES/SPLICING TAPE |
| TAPPI T 221 : 2009 | DRAINAGE TIME OF PULP |
| TAPPI T 248 : 2015 | LABORATORY BEATING OF PULP (PFI MILL METHOD) |
| TAPPI UM 203 : 2010 | FREENESS OF PULP (WILLIAMS TESTER) |
| TAPPI T 262 : 2012 | PREPARATION OF MECHANICAL PULPS FOR TESTING |
| TAPPI UM 221 : 2010 | LABORATORY PROCESSING OF PULP (PLATE REFINER) |
| TAPPI T 278 : 2004 : R2009 | PULP SCREENING (VALLEY-TYPE SCREENING DEVICE) |
| TAPPI T 441 : 2013 | WATER ABSORPTIVENESS OF SIZED (NON-BIBULOUS) PAPER, PAPERBOARD, AND CORRUGATED FIBREBOARD (COBB TEST) |
| TAPPI T 232 : 2013 | FIBER LENGTH OF PULP BY PROJECTION |
| ASTM D 7357 : 2007 : R2012 | Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete |
| TAPPI T 273 : 0 | WET ZERO-SPAN TENSILE STRENGTH OF PULP |
| TAPPI/ANSI T 402 sp:2013 | STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS |
| TAPPI T 231 : 2007 | ZERO-SPAN BREAKING STRENGTH OF PULP (DRY ZERO-SPAN TENSILE) |
| TAPPI T 1002 : 0 | DRAINAGE TIME OF PULP FOR INSULATING BOARDS |
| ASTM D 6148 : 1997 : R2007 | Standard Practice for Separation and Examination of Stickies (Withdrawn 2010) |
| ASTM E 1839 : 2013 : REDLINE | Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime |
| TAPPI T 277 : 2014 | MACRO STICKIES CONTENT IN PULP: THE 'PICK UP' METHOD |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.