ANSI E1.11 : 2008(R2013)
|
ENTERTAINMENT TECHNOLOGY - USITT DMX512-A, ASYNCHRONOUS SERIAL DIGITAL DATA TRANSMISSION STANDARD FOR CONTROLLING LIGHTING EQUIPMENT AND ACCESSORIES |
AES 50 : 2011
|
AES STANDARD FOR DIGITAL AUDIO ENGINEERING - HIGH-RESOLUTION MULTI-CHANNEL AUDIO INTERCONNECTION (HRMAI) |
MIL-DTL-32546 Base Document:2016
|
Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for |
CSA T568.1-2 : 2005 : R2010
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS - ADDENDUM 2 - GROUNDING AND BONDING SPECIFICATIONS FOR SCREENED BALANCED TWISTED-PAIR HORIZONTAL CABLING |
DD CEN/TS 15525:2006
|
Postal services. Standard interfaces. Interface between machine control and bar code printers |
I.S. CEN TS 15525:2006
|
POSTAL SERVICES - STANDARD INTERFACES - INTERFACE BETWEEN MACHINE CONTROL AND BAR CODE PRINTERS |
IEEE 1242-1999
|
IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
IEEE 525-2007
|
IEEE Guide for the Design and Installation of Cable Systems in Substations |
ASTM F 2218 : 2002 : R2015
|
Standard Guide for Hardware Implementation for Computerized Systems |
CEN/TS 15525:2006
|
Postal Services - Standard Interfaces - Interface between Machine Control and Bar Code Printers |
MIL-DTL-24643 Revision C:2009
|
Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
DIN ISO 29262:2013-03
|
Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011) |
BS ISO 29262:2011
|
Production equipment for microsystems. Interface between end effector and handling system |
ASTM F 2218 : 2002
|
Standard Guide for Hardware Implementation for Computerized Systems |
ANSI E1.27-2 : 2009(R2014)
|
ENTERTAINMENT TECHNOLOGY - RECOMMENDED PRACTICE FOR PERMANENTLY INSTALLED CONTROL CABLES FOR USE WITH ANSI E1.11 (DMX512-A) AND USITT DMX512/1990 PRODUCTS |
09/30192800 DC : 0
|
BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM |
ISO/IEC 14165-151:2017
|
Information technology Fibre channel Part 151: Fibre Channel BaseT (FC-BaseT) |
CSA T568.1 : 2005
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
ANSI E1.27-1 : 2006(R2016)
|
ENTERTAINMENT TECHNOLOGY-STANDARD FOR PORTABLE CONTROL CABLES FOR USE WITH USITT DMX512/1990 AND E1.11 (DMX512-A) PRODUCTS |
CSA Z8000 : 2011 : R2016
|
CANADIAN HEALTH CARE FACILITIES |
CSA Z8000 : 2011
|
CANADIAN HEALTH CARE FACILITIES |
CSA Z8000 : 2011 : INC : UPD 1 : 2013
|
CANADIAN HEALTH CARE FACILITIES |
ISO 29262:2011
|
Production equipment for microsystems Interface between end effector and handling system |
CSA T568.1-2 : 2005
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS - ADDENDUM 2 - GROUNDING AND BONDING SPECIFICATIONS FOR SCREENED BALANCED TWISTED-PAIR HORIZONTAL CABLING |
ANSI INCITS 435 : 2007
|
INFORMATION TECHNOLOGY - FIBRE CHANNEL - BASET (FC-BASET) |
API STD 17F : 2017
|
SUBSEA PRODUCTION CONTROL SYSTEMS |
ARINC 800-4 : 2015
|
CABIN CONNECTORS AND CABLES - PART 4: STANDARD TEST METHODOLOGY |
IEEE 802.3-2012
|
IEEE Standard for Ethernet |
BS ISO/IEC 14165-151:2017
|
Information technology. Fibre channel Fibre Channel BaseT (FC-BaseT) |
DIN ISO 29262 E : 2013
|
PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011) |
BS ISO/IEC/IEEE 8802-3:2017
|
Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements Standard for Ethernet |
CSA T568.2-1 : 2005
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED PAIR CABLING COMPONENTS - ADDENDUM 1 - TRANSMISSION PERFORMANCE SPECIFICATIONS FOR 4-PAIR 100 OHMS CATEGORY 6 CABLING |
CSA T568.2-1 : 2005 : R2010
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED PAIR CABLING COMPONENTS - ADDENDUM 1 - TRANSMISSION PERFORMANCE SPECIFICATIONS FOR 4-PAIR 100 OHMS CATEGORY 6 CABLING |
CSA T568.1 : 2005 : R2010
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
ISO/IEC/IEEE 8802-3:2017
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
ASTM F 2218 : 2002 : R2008
|
Standard Guide for Hardware Implementation for Computerized Systems |
IEEE 789-2013
|
IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
IEEE 1143-2012
|
IEEE Guide on Shielding Practice for Low Voltage Cables |
IEC 60512-27-100:2011
|
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g |