UNE-EN 71-1:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Safety of toys - Part 1: Mechanical and physical properties
Hardcopy , PDF
09-09-2015
29-05-2019
This European Standard specifies requirements and methods of tests for mechanical and physical properties of toys.
This European Standard applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children.
It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided. According to Directive 2009/48/EC intended for use by means that a parent or supervisor shall reasonably be able to assume by virtue of the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated age group. Therefore, for the purpose of this European Standard, e.g. soft-filled toys with simple features intended for holding and cuddling are considered as toys intended for children under 36 months.
NOTEInformation relating to the age grading of toys and, in particular, which toys are intended for children under 36 months and which toys are not, can be found in the CEN Report CR 14379, the Consumer Product Safety Commission (CPSC) Age determination guidelines, CEN/CENELEC Guide 11 and the European Commission s Guidance Documents.
This European Standard also specifies requirements for packaging, marking and labelling.
This European Standard does not cover musical instruments, sports equipment or similar items but does include their toy counterparts.
This European Standard does not apply to the following toys:
playground equipment intended for public use;
automatic playing machines, whether coin operated or not, intended for public use;
toy vehicles equipped with combustion engines (see A.2);
toy steam engines;
slings and catapults.
Items that are propelled into free flight by a child releasing an elastic band (e.g. aeroplanes and rockets) are considered as catapults (see the 5th indent above).
This European Standard does not cover electrical safety aspects of toys. These are covered by EN 62115.
| Committee |
CTN 172/SC 1
|
| DevelopmentNote |
Supersedes UNE 93011-1. (08/2003)
|
| DocumentType |
Standard
|
| Pages |
152
|
| ProductNote |
NEW CHILD AMD 1 2019 IS NOW ADDED
|
| PublisherName |
Asociación Española de Normalización
|
| Status |
Superseded
|
| Standards | Relationship |
| NBN EN 71-1 : 2015 | Identical |
| NF EN 71-1 : 2014 | Identical |
| BS EN 71-1 : 2014 | Identical |
| NS EN 71-1 : 2014 | Identical |
| I.S. EN 71-1:2014 | Identical |
| NEN EN 71-1 : 2014 | Identical |
| ONORM EN 71-1 : 2015 | Identical |
| EN 71-1 : 2018 | Identical |
| DIN EN 71-1:2015-02 | Identical |
| EN 71-1:2014 | Identical |
| EN 13899:2003 | Roller sports equipment - Roller skates - Safety requirements and test methods |
| ISO 11202:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| IEC 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 3744:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane |
| ISO 8098:2014 | Cycles — Safety requirements for bicycles for young children |
| EN 15649-3:2009+A1:2012 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices |
| CEN/TR 13387:2004 | Child use and care articles - Safety guidelines |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
| CR 14379:2002 | Classification of toys - Guidelines |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
| ISO 3746:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane |
| ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
| IEC 62115:2017 | Electric toys - Safety |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 13843:2009 | Roller sports equipment - Inline-skates - Safety requirements and test methods |
| 765/2008 : 2008 COR 1 2015 | REGULATION (EC) NO 765/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 JULY 2008 SETTING OUT THE REQUIREMENTS FOR ACCREDITATION AND MARKET SURVEILLANCE RELATING TO THE MARKETING OF PRODUCTS AND REPEALING REGULATION (EEC) NO 339/1993 (TEXT WITH EEA RELEVANCE) |
| ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 14619:2015 | Roller sports equipment - Kick scooters - Safety requirements and test methods |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
| CEN/CLC Guide 11:2012 | Product information relevant to consumers - Guidelines for standard developers |
| IEC TS 60318-7:2017 | Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of air-conduction hearing aids |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11201:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 13613:2009 | Roller sports equipment - Skateboards - Safety requirements and tests methods |
| EN 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 4593:1993 | Plastics — Film and sheeting — Determination of thickness by mechanical scanning |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.