UNE-EN 764-4:2015
Current
The latest, up-to-date edition.
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
Hardcopy , PDF
Spanish, Castilian, English
17-06-2015
Foreword
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 Terms and Definitions
3.2 Symbols and abbreviations
4 Types of technical delivery conditions
4.1 European Standards for material for pressure equipment
4.2 European approvals for materials for pressure equipment
4.3 Particular material appraisals for pressure equipment
5 Content of technical delivery conditions for materials for
pressure equipment
5.1 General
5.2 Requirements
5.3 Testing and inspection
5.4 Marking
Annex A (normative) - Procedures for the establishment of
European Approvals for pressure
equipment materials (EAM)
A.1 European Approvals of established materials
A.2 European Approvals for new materials
A.3 Procedure for the transformation of existing national
material specifications into European Material Data
Sheets
A.4 First testing of the production of established materials
A.5 First testing of the production of new materials
A.6 Title scheme and structure of a European Material Data
Sheet (EMDS) for materials for Pressure Equipment
Annex B (normative) - Appraisal schedule for ferritic and
martensitic steels
B.1 General
B.2 Test procedures
B.3 Basic testing
B.4 Subsequent testing
B.5 Collective tests
Annex C (normative) - Appraisal schedule for austenitic and
austenitic-ferritic steels
C.1 General
C.2 Test procedures
C.3 Basic testing
C.4 Sampling
C.5 Extent of testing
Annex D (normative) - Appraisal schedule for cast steels
D.1 General
D.2 Test procedures
D.3 Basic testing
D.4 Sampling
D.5 Extent of testing
Annex E (normative) - Welding and heat treatment conditions
for verification of the weldability of
fine-grain steels
E.1 General
E.2 Determination of the cooling time
E.3 Heat treatment conditions
Annex F (normative) - Metallographic investigation of the
sensitivity to stress relief cracking
Bibliography
Specifies the requirements for the establishment of the technical delivery conditions in form of: - harmonized European Standard for material; - European approval for material (EAM); - particular material appraisal, for metallic materials for pressure equipment in all product forms, and is restricted to steel at present.
Committee |
CTN 62/SC 1
|
DocumentType |
Standard
|
Pages |
44
|
PublisherName |
Asociacion Espanola de Normalizacion
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN 764-4 : 2015 | Identical |
NEN EN 764-4 : 2015 | Identical |
NS EN 764-4 : 2014 | Identical |
I.S. EN 764-4:2014 | Identical |
SN EN 764-4:2015 | Identical |
UNI EN 764-4 : 2005 | Identical |
BS EN 764-4:2014 | Identical |
EN 764-4:2014 | Identical |
DIN EN 764-4:2015-03 | Identical |
NF EN 764-4 : 2015 | Identical |
EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
CR ISO 15608 : 2000 | WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM |
EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
EN ISO 3690:2012 | Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012) |
EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
ISO 10052:2004 | Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN 10272:2016 | Stainless steel bars for pressure purposes |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
ISO 3785:2006 | Metallic materials — Designation of test specimen axes in relation to product texture |
EN ISO 17642-1:2004 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004) |
EN ISO 3785:2006 | Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006) |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
EN 12074:2000 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
ISO 17642-1:2004 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General |
EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
ISO 17642-2:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests |
EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.