UNE-EN IEC 60904-1:2021

This part of IEC 60904 describes procedures for the measurement of current-voltage characteristics (I-V curves) of photovoltaic (PV) devices in natural or simulated sunlight. These procedures are applicable to a single photovoltaic solar cell, a sub-assembly of photovoltaic solar cells, or a PV module. They are applicable to single-junction mono-facial PV devices. For other device types it is required to refer to the respective documents, in particular for multi-junction devices to IEC 60904-1-1 and for bifacial devices to IEC TS 60904-1-2. Additionally informative annexes are provided concerning area measurement of PV devices, PV devices with capacitance, measurement of dark current-voltage characteristics (dark I-V curves) and effects of spatial non-uniformity.This standard is applicable to flat, non-concentrating PV devices for use in terrestrial environments, with reference to (normally but not exclusively) the global reference spectral irradiance defined in IEC 60904-3. It may also be applicable to PV devices for use under concentrated irradiation if the application uses direct sunlight and reference is instead made to the direct reference spectral irradiance in IEC 60904-3.The purpose of this standard is to lay down basic requirements for the measurement of I-V curves of PV devices, to define procedures for different measuring techniques in use and to show practices for minimising measurement uncertainty. It is applicable to the measurement of I-V curves in general. I-V measurements may have various purposes, such as calibration (i.e. measurement at standard test conditions) of a PV device under test against a reference device, performance measurement under various conditions (e. g. for device temperature and irradiance) such as those required by IEC 60891 (for determination of temperature coefficients or internal series resistance), or required by IEC 61853-1 (power rating of PV devices) or IEC 60904-10 (for determination of linearity in output with respect to a particular test parameter). I-V measurements are also important in industrial environments such as PV module production facilities, and for testing in the field. Further guidance on I-V measurements in production facilities will be provided by an upcoming technical report IEC TR 32 XXXXX.The actual requirements (e.g. for the class of solar simulator) depend on the end-use. Other standards referring to IEC 60904-1 may stipulate specific requirements. Where those requirements are in conflict with this document, the specific requirements take precedence.