UNE-EN IEC 61010-2-120:2018

This clause of Part 1 is applicable except as follows: 1.1.1Equipment included in scope Replacement: Replace the first paragraph by the following: This Part 2 of IEC 61010 specifies particular safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used, which present HAZARDS from the power driven moving parts according to one or more of the items 1) to 5) used by the equipment for a specific application. 1) An assembly, fitted with or intended to be fitted with a drive system other than directly applied human or animal effort, consisting of linked parts or components, at least one of which moves, and which are joined together for a specific application. 2) An assembly referred to in item 1), missing only the components to connect it on site or to sources of energy and motion. 3) An assembly referred to in items 1) and 2), ready to be installed and able to function as it stands only if mounted on a means of transport, or installed in a building or a structure. 4) Assemblies referred to in items 1), 2) and 3) or partly completed assemblies which, in order to achieve the same end, are arranged and controlled so that they function as an integral whole. 5) An assembly of linked parts or components, at least one of which moves and which are joined together, intended for lifting loads and whose only power source is directly applied human effort. A partly completed assembly is almost equipment which cannot by itself perform a specific application. A partly completed assembly is only intended to be incorporated into or assembled with other equipment or other partly completed equipment, thereby forming equipment to which this Standard applies. 1.2.1 Aspects included in scope Replacement: Replace the first sentence by: The purpose of the requirements of this standard is to ensure that HAZARDS to the OPERATOR, SERVICE PERSONNEL and the surrounding area are reduced to a tolerable level. Addition, Add the following new paragraphs before the note: Requirements for CONTROL SYSTEMS and devices related to safety are specified in clause 101Protection against HAZARDS during specific OPERATING CONDITIONS of equipment are specified in clause 102Protection against HAZARDS during maintenance and service are specified in clause 103