UNE-EN ISO 19085-3:2018

This international standard deals with all significant hazards, hazardous situations and events, listed in Clause 4, relevant to NC boring machines, NC routing machines and NC combined boring/routing machines (as defined in 3.2.1), herein after referred to as "machines", designed to cut solid wood and material with similar physical characteristics to wood, when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases have been taken into account.This International standard also applies to machines fitted with:¾ðadditional equipment for sawing, sanding, edge banding or assembly units and dowel devices;¾ðfixed or movable workpiece support;¾ðmechanical, pneumatic, hydraulic or vacuum workpiece clamping;¾ðautomatic tool change facilities.This International standard does not deal with the specific hazards related to:a)edge banding equipment fitted to the machines;b)use of grinding wheels;c)ejection from milling and/or sawing tools through openings on machines where the distance between the work-piece support and the lower edge of the partial enclosure exceeds 400 mm;d)the combination of a single machine being used with other machines (as a part of a line);e)the necessity to step onto or into the machine body due to its large size, e.g. to adjust clamping elements on machines for wooden walls.This International standard is only applicable to machines designed to use milling tools with a cutting circle diameter below 16 mm or milling tools or saw-blades conforming to EN 847-1:2005+A1:2007 and EN 847-2:2001 and/or boring tools or sanding wheels.This International standard is not applicable to:1)single spindle hand fed/integrated fed routing machines;2)machines intended for use in potential explosive atmosphere.This standard applies to machines that are manufactured after the date of issue of this International Standard.