UNI EN 1076 : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS
14-01-2021
01-01-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Types of samplers
6 Requirements
7 General test conditions
8 Test methods
9 Test report
Annex A (informative) - Examples for the determination of the
breakthrough volume
Annex B (informative) - Estimation of uncertainty of
measurement
Annex C (informative) - Example of estimation of expanded
uncertainty
Bibliography
Describes performance requirements and test methods under prescribed laboratory conditions for the evaluation of pumped samplers used in conjunction with an air sampling pump and of procedures using these samplers for the determination of gases and vapours in workplace atmospheres.
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 1076:2010 | Identical |
| I.S. EN 1076:2009 | Identical |
| EN 1076:2009 | Identical |
| NF EN 1076 : 2010 | Identical |
| NBN EN 1076 : 2010 | Identical |
| SN EN 1076 : 2010 | Identical |
| BS EN 1076:2009 | Identical |
| DIN EN 1076:2010-04 | Identical |
| NS EN 1076 : 2009 | Identical |
| NEN EN 1076 : 2009 | Identical |
| EN ISO 6145-4:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004) |
| ISO 6144:2003 | Gas analysis — Preparation of calibration gas mixtures — Static volumetric method |
| EN ISO 6142:2006 | Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001) |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| EAL R2 : 1997 | EXPRESSION OF THE UNCERTAINTY OF MEASUREMENT IN CALIBRATION |
| EN ISO 9169:2006 | Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006) |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| EN ISO 6145-1:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003) |
| EN ISO 6143:2006 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) |
| EN ISO 6145-10:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002) |
| ISO 6143:2001 | Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| ISO 6142:2001 | Gas analysis Preparation of calibration gas mixtures Gravimetric method |
| ISO 14912:2003 | Gas analysis — Conversion of gas mixture composition data |
| EN ISO 6141:2015 | Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| ISO 7504:2015 | Gas analysis Vocabulary |
| EN ISO 6145-6:2017 | Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017) |
| EN 1540:2011 | Workplace exposure - Terminology |
| ISO 6141:2015 | Gas analysis Contents of certificates for calibration gas mixtures |
| EN 1232:1997 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
| ISO 8655-6:2002 | Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error |
| ISO 9169:2006 | Air quality Definition and determination of performance characteristics of an automatic measuring system |
| EN ISO 6144:2006 | Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.