EN 854:2015
|
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
EN ISO 8330:2014
|
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
EN 13766:2010
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
EN 856:2015
|
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
ISO 1825:2010
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge — Specification |
EN 14420-7:2013
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
EN 14420-4:2013
|
Hose fittings with clamp units - Part 4: Flange connections |
EN 13482:2013
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size) |
EN 12115:2011
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
EN 14420-5:2013
|
Hose fittings with clamp units - Part 5: Threaded connections |
EN ISO 7326:2016
|
Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
EN 857:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
ISO 7326:2016
|
Rubber and plastics hoses Assessment of ozone resistance under static conditions |
EN ISO 8033:2017
|
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
EN 14420-2:2013
|
Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
ISO 8330:2007
|
Rubber and plastics hoses and hose assemblies Vocabulary |
EN 13765:2010+A1:2015
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN ISO 6802:2008
|
Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005) |
EN 26801:1993/A1:2011
|
RUBBER OR PLASTICS HOSES - DETERMINATION OF VOLUMETRIC EXPANSION (ISO 6801:1983/AMD 1:2011) |
ISO 6802:2005
|
Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
ISO 9004:2009
|
Managing for the sustained success of an organization A quality management approach |
EN 14420-8:2013+A1:2016
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
EN ISO 8029:2014
|
Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
EN 1765:2016
|
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
EN 1761:1999
|
Rubber hoses and hose assemblies for fuel truck delivery - Specification |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 9001:2015
|
Quality management systems — Requirements |
EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
EN 14420-3:2013
|
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
EN 14420-6:2013
|
Hose fittings with clamp units - Part 6: TW tank truck couplings |
EN 855 : 1996
|
PLASTICS HOSES AND HOSE ASSEMBLIES - THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
EN 853:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 8029:2014
|
Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
ISO 8033:2016
|
Rubber and plastics hoses Determination of adhesion between components |
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |