ISO 4642-1:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
ISO 4642-2:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
12/30264538 DC : 0
|
BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
BS EN 60079-32-2:2015
|
Explosive atmospheres Electrostatics hazards. Tests |
ISO 16438:2012
|
Agricultural irrigation equipment Thermoplastic collapsible hoses for irrigation Specifications and test methods |
I.S. EN 13765:2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
11/30238916 DC : 0
|
BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
UNE-EN ISO 10619-3:2012
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
BS EN ISO 8331:2016
|
Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance |
BS ISO 19385:2017+A1:2019
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification |
PREN 13766 : DRAFT 2016
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
07/30162629 DC : 0
|
BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
ISO 10619-2:2017
|
Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
BS EN ISO 30013:2011
|
Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
09/30194969 DC : 0
|
BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 28017:2009
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification |
10/30234610 DC : DRAFT NOV 2010
|
BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
ISO 11759:1999
|
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
06/30146125 DC : 0
|
EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
BS ISO 8066-2:2001
|
Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification Refrigerant 134a |
07/30150928 DC : 0
|
BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
15/30317657 DC : 0
|
BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
ISO 8789:2009
|
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
BS EN ISO 18752:2016
|
Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
10/30234616 DC : 0
|
BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
10/30234628 DC : 0
|
BS EN 14420-6 - HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
10/30234619 DC : 0
|
BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
05/30129301 DC : DRAFT FEB 2005
|
ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
11/30235144 DC : 0
|
BS ISO 16438 - AGRICULTURAL IRRIGATION EQUIPMENT - THERMOPLASTIC COLLAPSIBLE HOSES FOR IRRIGATION - SPECIFICATIONS AND TEST METHODS |
DIN EN ISO 3821:2016-10 (Draft)
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
PREN 13483 : DRAFT 2011
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
ISO 3949:2009
|
Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
07/30175126 DC : DRAFT DEC 2007
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 18752 : 2014
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
09/30195768 DC : 0
|
BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
EN 13766:2010
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
BS ISO 1436:2017
|
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
UNI EN ISO 10619-2 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES |
ISO 3862:2017
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
I.S. EN ISO 10619-1:2018
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2017) |
I.S. EN 15889:2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
I.S. EN ISO 8029:2014
|
PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
ISO 1823:2015
|
Rubber hose and hose assemblies for oil suction and discharge service Specification |
DIN EN ISO 10619-1:2012-03
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011) |
I.S. EN 13766:2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
PD CLC/TR 60079-32-1:2015
|
Explosive atmospheres Electrostatic hazards, guidance |
UNE-EN ISO 30013:2012
|
Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
EN 13765:2010+A1:2015
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
NF EN ISO 1402 : 2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
I.S. EN ISO 3821:2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
UNE-EN 16436-1:2014
|
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
I.S. EN ISO 1403:2008
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
DIN EN 1947:2014-09
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
DIN EN 13483:2013-09
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
BS EN ISO 7233:2016
|
Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum |
BS EN 13482:2013
|
Rubber hoses and hose assemblies for asphalt and bitumen. Specification |
BS EN 1765:2004
|
Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
BS EN 14420-5:2013
|
Hose fittings with clamp units Threaded connections |
BS EN 559:2003
|
Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
BS EN ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam. Specification |
BS EN ISO 8033:2017
|
Rubber and plastics hoses. Determination of adhesion between components |
BS EN ISO 6803:2017
|
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing |
UNE-EN ISO 6224:2012
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
BS EN ISO 6807:2003
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications |
BS EN ISO 5774:2016
|
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
BS EN 14540:2014
|
Fire-fighting hoses. Non-percolating layflat hoses for fixed systems |
BS EN ISO 14557 : 2002
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
ISO 10619-3:2011
|
Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures |
BS EN 14420-3:2013
|
Hose fittings with clamp units Clamp units, bolted or pinned |
BS EN 14420-7:2013
|
Hose fittings with clamp units Cam locking couplings |
DIN EN 1361:1997-08
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
I.S. EN ISO 14557:2003
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
I.S. EN 14424:2013
|
HOSE FITTINGS WITH SCREWED FERRULES |
DIN EN ISO 6808:2000-11
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
I.S. EN ISO 7751:2016
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - RATIOS OF PROOF AND BURST PRESSURE TO MAXIMUM WORKING PRESSURE (ISO 7751:2016) |
DIN EN ISO 7326:2017-03
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
DIN EN ISO 4080:2010-05
|
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009) |
DIN EN 15889:2011-09
|
Fire-fighting hoses - Test methods |
DIN EN ISO 6803:2017-07
|
RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2017) |
EN 60079-32-2:2015
|
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
EN 14423:2013+A1:2016
|
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
07/30162632 DC : 0
|
BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES |
11/30244908 DC : 0
|
BS EN ISO 3994 - PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
15/30317639 DC : 0
|
BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
UNE-EN 16643:2017
|
Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
07/30170472 DC : DRAFT AUG 2007
|
BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
ONORM EN ISO 1403 : 2010
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
PD ISO/TR 17784:2003
|
Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
BS ISO 4642-1:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
10/30234631 DC : 0
|
BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
05/30129278 DC : DRAFT FEB 2005
|
ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
10/30234613 DC : DRAFT NOV 2010
|
BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
DIN EN 1474-2:2009-02
|
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
BS ISO 5772:2015
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
PD ISO/TS 11619:2014
|
Polyurethane tubing for use primarily in pneumatic installations. Dimensions and specification |
16/30335320 DC : 0
|
BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
ISO 1825:2017
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification |
NF EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
EN ISO 14557:2002/A1:2007
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
14/30266729 DC : 0
|
BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION |
01/122581 DC : DRAFT JUNE 2001
|
BS PREN 1361 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
15/30317678 DC : 0
|
BS EN ISO 7233 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION,STORAGE,USE AND MAINTENANCE |
16/30335329 DC : 0
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
PD ISO/TR 17165-2:2006
|
Hydraulic fluid power. Hose assemblies Recommended practices for hydraulic hose assemblies |
DIN EN ISO 1403:2010-04
|
RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
07/30169625 DC : 0
|
BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
15/30293925 DC : 0
|
BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION |
DIN 14811:2008-01
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
DIN EN ISO 3949 E : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
06/30153862 DC : DRAFT JULY 2006
|
BS ISO 8031 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL PROPERTIES |
BS ISO 4079:2017
|
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
UNI ISO 5598 : 2012
|
FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
PREN 14420-6 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
ISO 8028:2017
|
Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
ISO 4079:2017
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
I.S. EN ISO 10619-3:2011
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES (ISO 10619-3:2011) |
UNE-EN ISO 7326:2017
|
Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
I.S. EN 16436-1:2014
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
EN ISO 8028:2018
|
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
DIN EN ISO 10619-2:2012-03
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2011) |
ISO 6804:2016
|
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
I.S. EN 14423:2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
DIN EN 1762:2016-09 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
PD ISO/TS 17165-2:2013
|
Hydraulic fluid power. Hose assemblies Practices for hydraulic hose assemblies |
I.S. EN ISO 10619-2:2018
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2017) |
EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
EN ISO 1825:2017
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017) |
ISO 1403:2005
|
Rubber hoses, textile-reinforced, for general-purpose water applications Specification |
EN 16436-1:2014+A1:2015
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
BS EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
DIN EN ISO 7233:2015-10 (Draft)
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
DIN EN ISO 1402:2010-04
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
DIN EN 13482:2013-12
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
DIN EN 14422:2013-09
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
DIN EN ISO 7751:2011-12
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - RATIOS OF PROOF AND BURST PRESSURE TO MAXIMUM WORKING PRESSURE (ISO 7751:2016) |
DIN EN 14424:2013-09
|
HOSE FITTINGS WITH SCREWED FERRULES |
DIN EN 14540:2014-09
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
UNE-EN ISO 3994:2014
|
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014) |
UNE-EN 1765:2017
|
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
ISO 6803:2017
|
Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
UNE-EN ISO 8033:2017
|
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam — Specification |
BS EN ISO 3861:2008
|
Rubber hoses for sand and grit blasting. Specification |
UNE-EN ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
BS EN ISO 8031:2009
|
Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity |
I.S. EN 14420-5:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
I.S. EN 14420-6:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
I.S. EN ISO 6224:2011
|
THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011) |
I.S. EN 14540:2014
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
I.S. EN 13483:2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN 14420-1:2013-09
|
Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
I.S. EN ISO 3861:2008
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
I.S. EN 14420-8:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
DIN EN 1361:2004-10
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
DIN EN 14420-8:2016-06
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
DIN EN 14420-3:2013-09
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
I.S. EN ISO 1401:2016
|
RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016) |
I.S. EN 1947:2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
EN 12115:2011
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
I.S. EN ISO 5774:2016
|
PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
I.S. EN ISO 2398:2016
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
EN ISO 3861:2008
|
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
I.S. EN ISO 6807:2004
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
I.S. EN 14420-2:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
I.S. EN 12115:2011
|
RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
DIN EN 14420-5:2013-09
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
DIN EN ISO 2398:2010-04
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
DIN EN 14420-7:2013-09
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
DIN EN ISO 3821:2010-07
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN ISO 14113:2013
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
I.S. EN 14422:2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
I.S. EN ISO 3994:2014
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
I.S. EN ISO 6134:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
I.S. EN 694:2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
I.S. EN ISO 6803:2017
|
RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2017) |
I.S. EN 1360:2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN ISO 14557:2008-01
|
Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002 + AMD 1:2007); German version EN ISO 14557:2002 + A1:2007 |
DIN EN 14420-6:2013-09
|
Hose fittings with clamp units - Part 6: TW tank truck couplings |
DIN EN ISO 8031:2010-04
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
DIN EN 1947:2002-11
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
I.S. EN ISO 5771:2008
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
I.S. EN 13482:2013
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
I.S. EN 1765:2016
|
RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
I.S. EN ISO 7233:2016
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
I.S. EN 14420-3:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
I.S. EN ISO 4671:2007
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - METHODS OF MEASUREMENT OF THE DIMENSIONS OF HOSES AND THE LENGTHS OF HOSE ASSEMBLIES (ISO 4671:2007/AMD 1:2011) |
DIN EN 14420-2:2013-09
|
Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
DIN EN 14420-4:2013-09
|
Hose fittings with clamp units - Part 4: Flange connections |
I.S. EN ISO 6808:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
I.S. EN ISO 1402:2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
I.S. EN 14420-4:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
I.S. EN ISO 8033:2017
|
RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2016) |
DIN EN 1763-1:2001-04
|
RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
I.S. EN 14420-7:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
I.S. EN ISO 6806:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
I.S. EN 14420-1:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
ONORM EN 14420-4 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
ONORM EN 14420-7 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
ONORM EN 14420-2 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
UNI EN ISO 3861 : 2009
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
UNE-EN ISO 28017:2012
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) |
ONORM EN ISO 3861 : 2010
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
NF EN ISO 10619-3 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES |
BS EN ISO 8029:2014
|
Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
15/30317645 DC : 0
|
BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION |
S.R. CLC/TR 60079-32-1:2015
|
EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
PD ISO/TS 18409:2018
|
Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
11/30244915 DC : 0
|
BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
I.S. EN 1474-2:2008
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
BS EN ISO 1825:2017
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification |
08/30187544 DC : DRAFT OCT 2008
|
BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
DIN EN 1360:2013-09
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
05/30128222 DC : DRAFT JAN 2005
|
ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
08/30190043 DC : DRAFT SEP 2008
|
BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
UNE-EN 15889:2013
|
Fire-fighting hoses - Test methods |
BS ISO 16438:2012
|
Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods |
EN ISO 7233:2016
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
DD CEN/TS 14421:2006
|
Hose tail and ferrule for crimping and swaging |
16/30326500 DC : DRAFT JAN 2016
|
BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS |
16/30334966 DC : 0
|
BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
DIN EN ISO 30013:2012-03
|
Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
03/304727 DC : DRAFT OCT 2003
|
ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION |
BS ISO 17165-1:2007
|
Hydraulic fluid power. Hose assemblies Dimensions and requirements |
BS ISO 5598:2008
|
Fluid power systems and components. Vocabulary |
10/30234607 DC : 0
|
BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
UNI EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
BS EN 1474-2:2008
|
Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer hoses |
BIS IS 12656 : 2014
|
RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS |
UNE-EN ISO 4641:2017
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
BS ISO 3862:2009
|
Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
BS EN 15889:2011
|
Fire-fighting hoses. Test methods |
DIN EN ISO 8029:2014-12
|
PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
DIN EN 16436-1 E : 2016
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
BS ISO 4642-2:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
06/30127099 DC : DRAFT JUNE 2006
|
ISO 17165-1 - HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
12/30238564 DC : 0
|
BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION |
18/30363978 DC : 0
|
BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
BS EN ISO 3949:2014
|
Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification |
BS ISO 11424:2017
|
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
I.S. EN ISO 30013:2011
|
RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
ISO 28017:2018
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification |
I.S. EN ISO 28017:2018
|
RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018) |
PREN 14420-4 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
ISO/TR 17784:2003
|
Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
I.S. EN 60079-32-2:2015
|
EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
I.S. EN 16643:2016
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION |
ISO 5598:2008
|
Fluid power systems and components Vocabulary |
UNI EN ISO 8029 : 2014
|
PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
UNI EN 1474-2 : 2009
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
EN ISO 10619-2:2018
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017) |
ISO 8066-2:2001
|
Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 2: Refrigerant 134a |
ISO/TS 11619:2014
|
Polyurethane tubing for use primarily in pneumatic installations Dimensions and specification |
EN ISO 28017:2018
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) |
ONORM EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
ISO 27127:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification |
UNI EN ISO 3949 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
EN ISO 10619-1:2018
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) |
ISO 10619-1:2017
|
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature |
I.S. EN ISO 4641:2016
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
DIN EN ISO 6803:2015-10 (Draft)
|
RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2017) |
DIN EN ISO 6808:2014-10
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN ISO 6807:2004-08
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) |
DIN EN ISO 14113:2014-02
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
DIN EN ISO 3861:2010-04
|
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
DIN EN 14424 E : 2013
|
HOSE FITTINGS WITH SCREWED FERRULES |
DIN EN 694:2014-10
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
DIN EN ISO 3994:2015-11
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
DIN EN 14422 E : 2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
DIN EN 12115:2011-04
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
DIN EN ISO 7233:2017-03
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
ISO 7326:2016
|
Rubber and plastics hoses Assessment of ozone resistance under static conditions |
BS EN 1763-1:2001
|
Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
UNE-EN ISO 6808:2015
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
UNE-EN ISO 6803:2017
|
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017) |
NF EN ISO 8031 : 2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
ISO 1401:2016
|
Rubber hoses for agricultural spraying |
BS EN ISO 4671 : 2007
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - METHODS OF MEASUREMENT OF THE DIMENSIONS OF HOSES AND THE LENGTHS OF HOSE ASSEMBLIES |
ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners — Specification |
UNE-EN 14420-7:2014
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
BS EN 694:2014
|
Fire-fighting hoses. Semi-rigid hoses for fixed systems |
UNE-EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
ONORM EN ISO 8031 : 2010
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
ONORM EN 13766 : 2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
I.S. EN ISO 8031:2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
EN 1474-2:2008
|
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
EN ISO 8031:2009
|
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
UNI EN ISO 8031 : 2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
EN ISO 8033:2017
|
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
UNI EN ISO 4671 : 2011
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - METHODS OF MEASUREMENT OF THE DIMENSIONS OF HOSES AND THE LENGTHS OF HOSE ASSEMBLIES |
UNI EN 14420-6 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
UNI EN 14420-2 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
UNI EN ISO 14113 : 2013
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
UNI EN ISO 5771 : 2009
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
UNI EN 14424 : 2013
|
HOSE FITTINGS WITH SCREWED FERRULES |
EN ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
UNI EN ISO 4080 : 2010
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS |
EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
UNI EN ISO 1403 : 2009
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN 13482 : 2013
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
UNI EN ISO 6224 : 2011
|
THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN 1947 : 2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
UNI EN 1360 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNI EN ISO 6808 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
UNI EN ISO 3994 : 2014
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
UNI EN 14420-7 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
UNI EN 13483 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNI EN 14540 : 2014
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
UNI EN 14420-3 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
UNI EN 14420-5 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
UNI EN 694 : 2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
UNI EN 14422 : 2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
UNI EN 14420-1 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
UNI EN 14420-4 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
ISO/TS 17165-2:2018
|
Hydraulic fluid power Hose assemblies Part 2: Practices for hydraulic hose assemblies |
DIN EN ISO 7326:2015-10 (Draft)
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
08/30162045 DC : DRAFT FEB 2008
|
BS ISO 4080 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS |
BS ISO 16301:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification |
10/30234625 DC : 0
|
BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
UNI EN ISO 30013 : 2011
|
RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
BS ISO 10619-3:2011
|
Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness Bending tests at high and low temperatures |
I.S. EN ISO 8331:2016
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE (ISO 8331:2016) |
10/30212877 DC : DRAFT JUNE 2010
|
BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
PREN 14420-2 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
I.S. EN 1361:2004
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
PREN 14424 : DRAFT 2010
|
HOSE FITTINGS WITH SCREWED FERRULES |
08/30188437 DC : 0
|
BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
ISO 10960:2017
|
Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions |
ISO 3821:2008
|
Gas welding equipment Rubber hoses for welding, cutting and allied processes |
07/30175157 DC : DRAFT DEC 2007
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
ISO 19385:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification |
12/30197319 DC : 0
|
BS ISO 11619 - POLYURETHANE TUBING FOR USE PRIMARILY IN PNEUMATIC INSTALLATIONS - DIMENSIONS AND SPECIFICATIONS |
11/30250273 DC : 0
|
BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
16/30311803 DC : 0
|
BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION |
13/30227963 DC : 0
|
BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION |
EN ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
12/30264535 DC : 0
|
BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
UNE-EN ISO 18752:2017
|
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
UNI ISO 17165-1 : 2012
|
HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
08/30183539 DC : DRAFT JUNE 2008
|
BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
16/30335326 DC : 0
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 1823:2015
|
Rubber hose and hose assemblies for oil suction and discharge service. Specification |
PREN 14420-7 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
09/30200633 DC : 0
|
BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
13/30284248 DC : 0
|
BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION |
16/30317675 DC : 0
|
BS EN ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
10/30234634 DC : 0
|
BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
BS ISO 1382:2012
|
Rubber. Vocabulary |
BS EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge. Specification |
04/30110371 DC : 0
|
ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
ISO 16301:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification |
UNI EN ISO 10619-3 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES |
UNI EN 15889 : 2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
16/30330752 DC : 0
|
BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
UNE-EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
BS PD IEC TS 60079-32-1 : 2013
|
EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
I.S. EN ISO 18752:2016
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
I.S. EN ISO 3949:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
BS ISO 23297:2017
|
Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification |
ISO 17165-1:2007
|
Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements |
ISO 5772:2015
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
I.S. EN ISO 10960:2018
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS (ISO 10960:2017) |
BS EN ISO 8028:2018
|
Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
16/30337101 DC : 0
|
BS EN 16436-2 - RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 2: ASSEMBLIES |
ISO 13363:2016
|
Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
BS ISO 8789:2009
|
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
EN ISO 10960:2018
|
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) |
DIN EN ISO 3949:2016-08 (Draft)
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
BS EN ISO 10960:2018
|
Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions |
BIS IS 12657 : 2014
|
RUBBER AND PLASTICS HOSES - SUB-AMBIENT TEMPERATURE FLEXIBILITY TESTS |
ONORM EN ISO 3949 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
ISO 1382:2012
|
Rubber Vocabulary |
DIN EN 13765:2015-05
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
UNE-EN 14423:2014
|
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
PREN 1762 : DRAFT 2018
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
ISO 1436:2017
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
EN ISO 3949:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
I.S. CEN TS 14421:2006
|
HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
I.S. EN 1762:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
ISO 11424:2017
|
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
ISO 23297:2017
|
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
ISO 17324:2014
|
Rubber hoses for automotive turbochargers — Specification |
I.S. EN ISO 1825:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017) |
BS EN 13765 : 2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
DIN EN ISO 6806:2015-08 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
DIN EN ISO 5771:2009-10
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
BS EN ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air. Specification |
BS EN ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies. Hydrostatic testing |
UNE-EN ISO 7233:2017
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge Specification |
ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications Specification |
UNE-EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
ISO 8033:2016
|
Rubber and plastics hoses Determination of adhesion between components |
ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air Specification |
UNE-EN ISO 1401:2017
|
Rubber hoses for agricultural spraying (ISO 1401:2016) |
UNE-EN ISO 10619-1:2012
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) |
BS EN ISO 7751:2016
|
Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure |
BS EN ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification |
UNE-EN ISO 3821:2011
|
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
BS EN 12115:2011
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
BS EN ISO 4080:2009
|
Rubber and plastics hoses and hose assemblies. Determination of permeability to gas |
BS EN 14420-2:2013
|
Hose fittings with clamp units Hose side parts of hose tail |
BS EN ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification |
BS EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners. Specification |
UNE-EN ISO 10619-2:2012
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) |
UNE-EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
BS EN 14420-1:2013
|
Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
ISO 14113:2013
|
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 8031:2009
|
Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
ISO 14557:2002
|
Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies |
ISO 7233:2016
|
Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
UNE-EN 13482:2014
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
ISO 3994:2014
|
Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification |
ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
ISO 4080:2009
|
Rubber and plastics hoses and hose assemblies Determination of permeability to gas |
ISO 3861:2005
|
Rubber hoses for sand and grit blasting Specification |
ISO 8331:2016
|
Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance |
BS EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia Specification |
BS EN ISO 3994:2014
|
Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification |
UNE-EN 694:2015
|
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
BS EN 1947:2014
|
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
UNE-EN 14420-5:2014
|
Hose fittings with clamp units - Part 5: Threaded connections |
BS EN 14422:2013
|
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
UNE-EN 14422:2014
|
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
BS EN 14420-4:2013
|
Hose fittings with clamp units Flange connections |
UNE-EN 1947:2015
|
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
BS EN 14424:2013
|
Hose fittings with screwed ferrules |
UNE-EN 14540:2015
|
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies Hydrostatic testing |
UNE-EN ISO 8031:2010
|
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
BS EN ISO 1403:2008
|
Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
UNE-EN ISO 5774:2016
|
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
ISO 4671:2007
|
Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
BS EN ISO 1401:2016
|
Rubber hoses for agricultural spraying |
ISO 6807:2003
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification |
UNE-EN ISO 7751:2017
|
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016) |
BS EN 14420-6:2013
|
Hose fittings with clamp units TW tank truck couplings |
UNE-EN ISO 2398:2017
|
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
UNE-EN 14420-3:2014
|
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
UNE-EN 14424:2014
|
Hose fittings with screwed ferrules |
EN ISO 7751:2016
|
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016) |
EN 14422:2013
|
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
EN 14420-2:2013
|
Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
EN ISO 18752:2016
|
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
EN ISO 3821:2010
|
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
EN 14420-1:2013
|
Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
EN ISO 8029:2014
|
Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
EN 14540:2014
|
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
EN ISO 6807 : 2003
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
EN ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
EN ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
EN 1761:1999
|
Rubber hoses and hose assemblies for fuel truck delivery - Specification |
EN ISO 10619-3:2011
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
EN 16643:2016
|
Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
EN 559 : 2003
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
EN ISO 1403:2008
|
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005) |
EN ISO 30013:2011
|
Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
EN 14420-4:2013
|
Hose fittings with clamp units - Part 4: Flange connections |
EN 14420-5:2013
|
Hose fittings with clamp units - Part 5: Threaded connections |
EN 1947:2014
|
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
EN 14420-7:2013
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
EN ISO 6803:2017
|
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017) |
EN 1765:2016
|
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
EN ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
EN 15889:2011
|
Fire-fighting hoses - Test methods |
EN ISO 8331:2016
|
Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016) |
EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
EN ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
EN ISO 4671:2007/A1:2011
|
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011) |
EN ISO 3994:2014
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
EN 14424:2013
|
Hose fittings with screwed ferrules |
EN ISO 1401:2016
|
Rubber hoses for agricultural spraying (ISO 1401:2016) |
EN ISO 7326:2016
|
Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
EN 694:2014
|
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
EN 1763-1 : 2000
|
RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
EN 14420-8:2013+A1:2016
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
EN ISO 5774:2016
|
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
EN 14420-6:2013
|
Hose fittings with clamp units - Part 6: TW tank truck couplings |
EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
EN ISO 4080:2009
|
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009) |
EN 14420-3:2013
|
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
DIN EN 16436-1:2016-04
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
PREN 14420-1 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
BS ISO 17324:2014
|
Rubber hoses for automotive turbochargers. Specification |
12/30261644 DC : 0
|
BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
08/30183047 DC : DRAFT MAY 2008
|
BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
BS ISO 27126:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification |
PREN 14420-3 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
BS EN ISO 7326:2016
|
Rubber and plastics hoses. Assessment of ozone resistance under static conditions |
ONORM EN 12115 : OCT 2011
|
RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
DIN EN ISO 4641:2016-07 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
PREN 14422 : DRAFT 2010
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
PREN 1360 : DRAFT 2011
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
BS ISO 27127:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
13/30275849 DC : 0
|
BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
ISO 2928:2003
|
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification |
DIN EN ISO 28017:2015-12
|
RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015) |
11/30250270 DC : 0
|
BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNE-EN 13765:2010
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
UNE-EN ISO 8029:2014
|
Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
08/30165015 DC : DRAFT FEB 2008
|
BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
DIN EN ISO 10619-3:2012-03
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
DIN EN 15889 E : 2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
10/30234604 DC : 0
|
BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES |
15/30317648 DC : 0
|
BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
15/30317663 DC : 0
|
BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
15/30317693 DC : 0
|
BS EN ISO 6803 - RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING |
16/30302789 DC : DRAFT APR 2016
|
BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION |
ISO/TS 18409:2018
|
Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
ISO 11237:2017
|
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
BS ISO 13363:2004
|
Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification |
08/30178592 DC : DRAFT FEB 2008
|
BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
PREN 14420-8 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
BS ISO 2929:2014
|
Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification |
DIN EN 13766:2010-11
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
UNI EN ISO 1402 : 2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
BS EN ISO 3821:2010
|
Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
I.S. EN ISO 8028:2018
|
RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
UNE-EN ISO 8331:2017
|
Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016) |
UNI EN ISO 10619-1 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE |
ISO 2929:2014
|
Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification |
BS EN 16436-1 : 2014
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
UNE-EN 13766:2011
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
CLC/TR 60079-32-1:2015
|
Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
BS EN 14423:2013+A2:2019
|
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
BS EN 13766:2010
|
Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
ISO 27126:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification |
ISO/TR 17165-2:2006
|
Hydraulic fluid power Hose assemblies Part 2: Recommended practices for hydraulic hose assemblies |
DIN EN ISO 7751:2015-10 (Draft)
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - RATIOS OF PROOF AND BURST PRESSURE TO MAXIMUM WORKING PRESSURE (ISO 7751:2016) |
ISO 30013:2011
|
Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
UNE-EN 60079-32-2:2016
|
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
UNE-EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
ISO 18752:2014
|
Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
BS EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
BS EN 14420-8 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
UNE-EN ISO 1402:2010
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
ISO 5774:2016
|
Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
ISO 7751:2016
|
Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
BS EN ISO 14113:2013
|
Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
BS EN ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
ISO 8029:2014
|
Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
BS EN 1761:1999
|
Rubber hoses and hose assemblies for fuel truck delivery. Specification |
CEN/TS 14421 : 2006
|
HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
UNI EN 12115 : 2011
|
RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
DIN EN 1762:2004-07
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
EN 13482:2013
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
DIN EN ISO 6224:2012-02
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
DIN EN ISO 4671:2012-02
|
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007 + Amd 1:2011); German version EN ISO 4671:2007 + A1:2011 |
UNE-EN 14420-8:2014
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |