UNI EN 1470 : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS
12-06-2014
01-01-2008
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description of categories and levels of use
4.1 Needled floor coverings categories
4.2 Levels of use
5 Identification requirements
6 Basic requirements
7 Level of use classification
7.1 General
7.2 Classification for wear
7.2.1 Primary requirements for use-surface
7.2.2 Abrasion resistance - Lisson test - Mass
loss per unit area (m[v])
7.3 General structural integrity
7.4 Change in colour
8 Luxury rating classification
9 Performance properties
10 Report
11 Symbols
Annex A (normative) - Additional requirements for tiles
Annex B (normative) - Suitability for under floor heating
B.1 General
B.2 Thermal aging test
Annex C (normative) - Colour change due to soiling subsequent
to spilled water
Annex D (normative) - Summary test report
Annex E (normative) - Criteria for the assessment of stair
suitability
Bibliography
Provides and specifies the requirements for classification of needled floor coverings in sheet form into use classes in respect of wear and appearance retention and a class for luxury rating.
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 1470 : 2008 | Identical |
| EN 1470:2008 | Identical |
| NEN EN 1470 : 2008 | Identical |
| NS EN 1470 : 2ED 2008 | Identical |
| SN EN 1470 : 2008 | Identical |
| I.S. EN 1470:2008 | Identical |
| BS EN 1470:2008 | Identical |
| EN 1478 : 1995 | Identical |
| NF EN 1470 : 2008 | Identical |
| UNE-EN 1470:2008 | Identical |
| DIN EN 1470:2009-02 | Identical |
| DIN EN 1470:1998-01 | Identical |
| ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
| EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
| ISO 2551:1981 | Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 1766:1999 | Textile floor coverings Determination of thickness of pile above the substrate |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| EN 985:2001 | Textile floor coverings - Castor chair test |
| ISO 10361:2015 | Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
| ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
| ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| EN 984:2001 | Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| EN 995:1995 | Textile floor coverings - Assessment of the creep of the backings |
| ISO 3415:1986 | Textile floor coverings — Determination of thickness loss after brief, moderate static loading |
| CEN/TS 14159:2007 | Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| ISO 11378-2:2001 | Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
| EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
| ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| ISO 2424:2007 | Textile floor coverings — Vocabulary |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| EN 685:2007 | Resilient, textile and laminate floor coverings - Classification |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
| EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.