UNI EN 1486 : 2008
Current
The latest, up-to-date edition.
PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING
17-04-2008
INDICE
PREMESSA
INTRODUZIONE
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 REQUISITI GENERALI
4.1 Insieme di indumenti
4.2 Indumenti
4.2.1 Generalità
4.2.2 Tasche
4.2.3 Designazione delle taglie
4.3 Protezione della testa
4.3.1 Generalità
4.3.2 Schermo
4.4 Protezioni per le mani
4.5 Soprascarpe
5 CAMPIONAMENTO, PRETRATTAMENTO, INVECCHIAMENTO
5.1 Campionamento
5.2 Pretrattamento
5.2.1 Generalità
5.2.2 Pulizia
5.2.3 Pretrattamento meccanico
5.3 Invecchiamento
6 REQUISITI TERMICI
6.1 Propagazione limitata della fiamma
6.2 Trasferimento di calore (calore radiante)
6.3 Trasferimento di calore (calore convettivo)
6.4 Calore per contatto
6.5 Resistenza al calore
7 REQUISITI MECCANICI
7.1 Variazione dimensionale
7.2 Resistenza alla trazione
7.3 Resistenza allo scoppio
7.4 Resistenza alla lacerazione
7.5 Resistenza della cucitura
8 ALTRI REQUISITI
8.1 Bagnatura della superficie
8.2 Prova sul capo di abbigliamento completo (facoltativa)
9 MARCATURA
10 INFORMAZIONI FORNITE DAL FABBRICANTE
APPENDICE A (normativa) - PRETRATTAMENTO MECCANICO DEI MATERIALI
METALLIZZATI
A.1 Principio
A.2 Campionamento
A.3 Apparecchiatura
A.4 Procedimento
APPENDICE B (informativa) - AVVERTENZA - FIAMME DILAGANTI
APPENDICE C (informativa) - LINEE GUIDA PER LA PROGETTAZIONE DEGLI
INDUMENTI
APPENDICE D (informativa) - VERIFICA DELLE CARATTERISTICHE ERGONOMICHE
DI BASE DEGLI INDUMENTI DI PROTEZIONE - PROVE PRATICHE
DI PRESTAZIONE
APPENDICE E (normativa) - PREVISIONE DELLE BRUCIATURE UTILIZZANDO UN
MANICHINO CON STRUMENTAZIONE
APPENDICE F (informativa) - DIFFERENZE TECNICHE SIGNIFICATIVE TRA IL
PRESENTE DOCUMENTO E LA PRECEDENTE EDIZIONE EN 1486:1996
APPENDICE ZA (informativa) - RAPPORTO FRA LA PRESENTE NORMA EUROPEA E
I REQUISITI ESSENZIALI DELLA DIRETTIVA UE 89/686/CEE
BIBLIOGRAFIA
Describes test methods and minimum performance requirements for reflective protective clothing used in specialised fire-fighting.
Committee |
CT 42
|
DocumentType |
Test Method
|
PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
Status |
Current
|
Standards | Relationship |
NF EN 1486 : 2007 | Identical |
NBN EN 1486 : 2008 | Identical |
NEN EN 1486 : 2007 | Identical |
NS EN 1486 : 2ED 2007 | Identical |
I.S. EN 1486:2007 | Identical |
SN EN 1486 : 2007 | Identical |
UNE-EN 1486:2008 | Identical |
BS EN 1486:2007 | Identical |
EN 1486:2007 | Identical |
DIN EN 1486:2008-04 | Identical |
EN 15614:2007 | Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
EN 14052:2012+A1:2012 | High performance industrial helmets |
EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
EN 702:1994 | Protective clothing - Protection against heat and flame - Test method: Determination of the contact heat transmission through protective clothing or its materials |
EN 25077 : 1993 | TEXTILES - DETERMINATION OF DIMENSIONAL CHANGE IN WASHING AND DRYING |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN 166:2001 | Personal eye-protection - Specifications |
EN ISO 20345:2011 | Personal protective equipment - Safety footwear (ISO 20345:2011) |
EN ISO 13938-1:1999 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
EN 171:2002 | Personal eye-protection - Infrared filters - Transmittance requirements and recommended use |
EN 443:2008 | Helmets for fire fighting in buildings and other structures |
EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
EN 340:2003 | Protective clothing - General requirements |
ISO 20345:2011 | Personal protective equipment Safety footwear |
ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
EN 531:1995/A1:1998 | PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
EN 15090:2012 | Footwear for firefighters |
EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
EN 24920:1992 | Textiles - Determination of resistance to surface wetting (spray test) of fabrics |
EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
EN 397:2012+A1:2012 | Industrial safety helmets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.