VDE 0160-100 : 2001 COR 2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
Published date
12-01-2013
Publisher
Superseded date
01-07-2005
Superseded by
Sorry this product is not available in your region.
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen
4 Allgemeine Anforderungen und Prüfungen
4.1 Systembetrachtungen
4.2 Prüfungen
4.3 Unterlagen für den Anwender
5 Störfestigkeitsanforderungen
5.1 Allgemeine Bedingungen
5.2 Grundlegende Störfestigkeitsanforderungen -
Niederfrequente Störungen
5.3 Grundlegende Störfestigkeitsanforderungen -
Hochfrequente Störungen
5.4 Statistische Betrachtungsweise der
Störfestigkeitsanforderungen
6 Störaussendungsanforderungen
6.1 Störaussendungsgrenzwerte im niederfrequenten
Bereich
6.2 Bedingungen während der Hochfrequenzprüfungen
6.3 Störaussendungsgrenzwerte im hochfrequenten
Bereich
6.4 Statistische Betrachtungsweise der
Störaussendungsanforderungen
7 Mindestanforderungen zur Erfüllung von
Sicherheitsmerkmalen
7.1 Sicherheitsforderungen während der
Störfestigkeitsprüfungen
7.2 Sicherheit während des Betriebs
7.3 Sicherheit in Bezug auf diese Norm
Anhang A (informativ) EMV-Verfahren
Anhang B (informativ) Niederfrequente
Phänomeneereichen
Anhang C (informativ) Blindleistungskompensation -
Filtermassnahmen
Anhang D (informativ) Betrachtungen zur Störaussendung
im Hochfrequenzb
Anhang E (informativ) Literaturverzeichnis
Anhang ZA (normativ) Normative Verweisungen auf
Internationale Publikationen mit ihren
entsprechenden Europäischen Publikationen
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 61800-3 : 2004 AMD 1 2012 | Identical |
| DIN EN 61800-3 : 2012 COR 1 2014 | Identical |
| IEC 61800-3:2017 | Identical |
| DIN EN 61800-1 : 1999-08 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| VDE 0160-101 : 1999-08 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| IEC TR 61000-2-6:1995 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
| DIN V ENV 61000-2-2 : 1994 | ELECTROMAGNETIC COMPATIBILITY (EMC) ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
| VDE 0160-101 : 1999-08 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| IEC 60050-131:2002 | International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory |
| IEC 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
| DIN EN 61800-1 : 1999-08 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| VDE 0847-4-9 : 2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-9: TESTING AND MEASUREMENT TECHNIQUES - IMPULSE MAGNETIC FIELD IMMUNITY TEST (IEC 61000-4-9:2016) |
| ENV 61000-2-2 : 1993 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
| DIN EN 61000-4-9 : 2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-9: TESTING AND MEASUREMENT TECHNIQUES - IMPULSE MAGNETIC FIELD IMMUNITY TEST (IEC 61000-4-9:2016) |
| VDE 0876-16-1 : DRAFT AMD 2 2002 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS |
| EN 61000-4-9:2016 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| EN 61000-3-3:2013 | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current |
| VDE 0847-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 61000-2-4:2002/AC:2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES |
| HD 625.1 : 200S1 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS |
| VDE 0847-4-5 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014) |
| DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| DIN EN 61000-4-5 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014) |
| VDE 0847-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| DIN VDE 0100-300 : 1996 | ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V - PART 3: ASSESSMENT OF GENERAL CHARACTERISTICS OF INSTALLATIONS |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| VDE 0558-11 : 2011 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| DIN EN 50178 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| VDE 0847-4-8 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| DIN EN 61000-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| VDE 0160 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| DIN VDE 0838-5 : DRAFT 1996 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3: LIMITS - SECTION 5: LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER IN LOW-VOLTAGE POWER SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT > 16 A |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| VDE 0847-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| DIN EN 61000-3-2 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014) |
| DIN EN 61000-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| EN 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
| DIN VDE 0876-16-1 : DRAFT AMD 2 2002 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 16-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| DIN EN 61000-3-3 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
| VDE 0100-300 : 1996 | ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V - PART 3: ASSESSMENT OF GENERAL CHARACTERISTICS OF INSTALLATIONS |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
| IEC TS 61000-3-4:1998 | Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
| DIN EN 61000-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| IEC TR 61000-2-1:1990 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
| DIN IEC 60050-151:1983-12 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 151: ELECTRICAL AND MAGNETIC DEVICES |
| VDE 0839-2-2 : 2003 | ELEKTROMAGNETISCHE VERTRAEGLICHKEIT (EMV) - UMGEBUNGSBEDINGUNGEN - VERTRAEGLICHKEITSPEGEL FUER NIEDERFREQUENTE LEITUNGSGEFUEHRTE STOERGROESSEN UND SIGNALUEBERTRAGUNG IN OEFFENTLICHEN NIEDERSPANNUNGSNETZEN |
| IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| EN 61000-3-2:2014 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
| VDE 0838-5 : DRAFT 96 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3: LIMITS; SECTION 5: LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER IN LOW-VOLTAGE POWER SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT GREATER THAN 16 A |
| DIN IEC 60050-131:1983-01 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 131: ELECTRIC AND MAGNETIC CIRCUITS |
| VDE 0839-2-4 : 2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES |
| DIN EN 61000-4-8 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| EN 61000-4-4:2012 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| DIN EN 61000-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| HD 384.3 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - ASSESSMENT OF GENERAL CHARACTERISTICS |
| VDE 0847-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| DIN EN 61000-2-4 : 2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES |
| CISPR 16-1:1999+AMD1:2002 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
| EN 61000-4-10:2017 | Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
| DIN EN 55011 : 2011 | INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 11:2015, MODIFIED + A1:2017) |
| IEC 61800-1:1997 | Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems |
| EN 61800-1:1998 | Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems |
| DIN EN 60146-1-1 : 2011 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
Summarise
Sorry this product is not available in your region.