VDE 0636-22 : 1984

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT

Available format(s):

Superseded date: 01-06-1998

Language(s):

Published date: 12-01-2013

Publisher: Verband Deutscher Elektrotechniker

Table of Contents - (Show below) - (Hide below)

1 Anwendungsbereich
2 Begriffe
  2.1 NH-Sicherungsleiste
  2.2 Schlagvorrichtung
  2.3 Schaltzustandsgeber
  2.4 Auslösevorrichtung
  2.5 Einschwenk- oder Einsetzvorrichtung
  2.6 Grifflaschen
  2.7 Bemessungsstrom
3 Betriebsbedingungen
4 Klassifikation
5 Charakteristische Merkmale
  5.1 Spannungen
  5.2 Ströme
  5.3 Kennlinien
  5.4 Selektivität
  5.5 Kennlinienbeständigkeit
  5.6 Erwärmung und Verlustleistung
  5.7 Ausschaltvermögen
6 Anforderungen
  6.1 Allgemeines
  6.2 Unverwechselbarkeit
  6.3 Berührungsschutz
  6.4 Kriech-, Luftstrecken und Abstände
  6.5 Leiteranschlüsse
  6.6 NH-Sicherungsunterteile bzw NH-Sicherungsleisten
  6.7 Sicherungseinsätze
  6.8 Kontaktstücke
  6.9 Werkstoffe
  6.10 Isolierteile
  6.11 Kennzeichnung
7 Prüfung
  7.1 Allgemeines
  7.2 Masse, Kennzeichnung, Kriech- und Luftstrecken,
       Abstände
  7.3 Kriechstromfestigkeit
  7.4 Spannungsfestigkeit und Isolationswiderstand
  7.5 Erwärmung und Verlustleistung
  7.6 Zeit/Strom-Verhalten
  7.7 Kennlinienbeständigkeit
  7.8 Wärme-, Schlagfestigkeit und Feuersicherheit
  7.9 Widerstandsfähigkeit gegen Korrosion (Rost)
  7.10 Mechanische Festigkeit und Montierbarkeit
  7.11 Ausschaltvermögen und Schaltspannung
  7.12 Selektivität
  7.13 Funktion des Anzeigers und der Schlagvorrichtung
  7.14 Alterungsbeständigkeit der Kontakte
  7.15 Dynamische Kurzschlussfestigkeit von
       NH-Sicherungsunterteilen und NH-Sicherungsleisten
  7.16 Alterungsbeständigkeit von Leiteranschlussklemmen an
       NH-Sicherungsunterteilen und NH-Sicherungsleisten
Bilder
Zitierte Normen und andere Unterlagen
Erläuterungen

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	Verband Deutscher Elektrotechniker
Status	Superseded
Superseded By	VDE 0636-201 : 2006

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN 57636-22 : 1984	Corresponds

Standards Referenced By This Book - (Show below) - (Hide below)

DIN VDE 0636-41 : 1983	LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C.
DIN 57636-21 : 1984	LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C.
DIN 57636-1 : 1983	LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS
DIN 57636-31 : 1983	LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C.
DIN 57636-41 : 1983	LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C.
DIN VDE 0636-1 : 1983	LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS
DIN 43620-1:1984-05	LOW VOLTAGE HIGH RUPTURING CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE LINKS FOR 500 & 660 V A.C. & 440 V D.C.
DIN 43620-3:1984-05	LOW-VOLTAGE, HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE BASES FOR LV HRC FUSE LINKS FOR 500 AND 660 V A.C. AND 440 V D.C.

Standards Referencing This Book - (Show below) - (Hide below)

DIN 931-1:1987-09	M 1,6 TO M 39 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN 42523:1987-05	TRANSFORMERS - ENCAPSULATED-WINDING DRY-TYPE TRANSFORMERS - 50 HZ, 100 TO 2500 KVA
DIN 42500:1984-09	THREE-PHASE OIL-IMMERSED PUBLIC DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 TO 2500 KVA, U[M] = 24 KV
DIN IEC 60068-2-3:1986-12	ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE
DIN 43623:1981-05	THREE-POLE FUSE-BASE RACKS 660 V, 100 TO 630 A, FOR L.V.H.R.C. FUSES, FOR BUSBAR MOUNTING
DIN 267-11:1980-01	FASTENERS - TECHNICAL DELIVERY CONDITIONS (WITH ADDITIONS TO ISO 3506) - CORROSION-RESISTANT STAINLESS STEEL FASTENERS
DIN 53480 : 1976	VDE-BESTIMMUNG FUER ELEKTRISCHE PRUEFUNGEN VON ISOLIERSTOFFEN; KRIECHSTROMFESTIGKEIT
DIN 57636-31 : 1983	LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C.
DIN 57636-23 : 1984	NIEDERSPANNUNGSSICHERUNGEN; NH-SYSTEM, HALBLEITERSCHUTZSICHERUNGEN BIS 1600 A UND BIS 3000 V
DIN 43620-4:1981-09	LOW VOLTAGE HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS 500 AND 660 V A.C. AND 440 D.C. - REPLACEMENT HANDLE FOR THE SIZES 00 UP TO 3 - DIMENSIONS OF THE ENGAGING PART
DIN 42524:1987-05	TRANSFORMERS - NON-ENCAPSULATED-WINDING DRY-TYPE TRANSFORMERS - 50 HZ, 100 TO 1600 KVA
DIN 57636-41 : 1983	LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C.
DIN 46206-2:1971-06	SUPPLY-TERMINALS FOR ELECTRICAL EQUIPMENT >= 40 A, CONNECTIONS WITH RECTANGULAR CROSS-SECTION, BASIC DIMENSIONS AND COORDINATION
DIN 43620-1:1984-05	LOW VOLTAGE HIGH RUPTURING CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE LINKS FOR 500 & 660 V A.C. & 440 V D.C.
DIN 43620-3:1984-05	LOW-VOLTAGE, HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE BASES FOR LV HRC FUSE LINKS FOR 500 AND 660 V A.C. AND 440 V D.C.
DIN 933:1987-09	M 1.6 TO M 52 HEXAGON HEAD SCREWS THREADED UP TO THE HEAD; PRODUCT GRADES A & B
DIN 50018:2013-05	Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN 57471-2 : 1975	VDE SPECIFICATIONS FOR FIRE RISK TESTING OF ELECTROTECHNICAL PRODUCTS, THEIR SUBASSEMBLIES AND COMPONENTS - GLOW-WIRE TEST
DIN 57636-1 : 1983	LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart