VDI 4640 Blatt 4:2004-09
Current
The latest, up-to-date edition.
Thermal use of the underground - Direct uses
Hardcopy , PDF
German - English
01-09-2004
Preliminary note
1 Scope
2 Abbreviations and definitions
3 Direct thermal use of ground water
4 Direct thermal use of the underground with
borehole heat exchangers, energy piles, etc
5 Air heating or cooling in the underground
Annex - Associated standards, guidelines,
regulations, etc
The document refers to the thermal use of the subsoil down to a depth of around 400 m.
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 6022 Blatt 1.2:2014-06 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice) |
VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
DIN 18196:2011-05 | Earthworks and foundations - Soil classification for civil engineering purposes |
DIN 4030-1:2008-06 | Assessment of water, soil and gases for their aggressiveness to concrete - Part 1: Principles and limiting values |
DIN 19534-3:2000-07 | PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) WITH RING SEAL SOCKET FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - PART 3: QUALITY CONTROL AND INSTALLATION |
DIN 4030-2:2008-06 | Assessment of water, soil and gases for their aggressiveness to concrete - Part 2: Sampling and analysis of water and soil samples |
VDI 6022 Blatt 2:2007-07 | Hygienic requirements for ventilation and air-conditioning systems - Measurements procedures and examinations in hygiene check-ups and hygiene inspections |
DIN 50930-2:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF UNALLOYED AND LOW-ALLOY IRON MATERIALS |
DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
VDI 4640 Blatt 3:2001-06 | Utilization of the subsurface for thermal purposes - Underground thermal energy storage |
DIN 50930-5:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF COPPER AND COPPER ALLOYS |
DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
DVGW W 120 : 2005 | QUALIFIKATIONSANFORDERUNGEN FUER DIE BEREICHE BOHRTECHNIK, BRUNNENBAU UND BRUNNENREGENERIERUNG |
DIN 19850-2:1996-11 | FIBRE CEMENT PIPES AND FITTINGS FOR SEWERS - PART 2: DIMENSIONS OF JOINT |
VDI 4640 Blatt 2:2001-09 | Thermal use of the underground - Ground source heat pump systems |
VDI 2078 Blatt 1:2003-02 | Cooling load calculation of air-conditioned buildings with room-conditioning from cooled walls and ceilings |
DIN 50930-4:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS |
DIN 4140-2:1986-06 | INSULATION OF SERVICE INSTALLATIONS - LOW TEMPERATURE INSULATION |
VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
DIN 4124:2012-01 | EXCAVATIONS AND TRENCHES - SLOPES, PLANKING AND STRUTTING BREADTHS OF WORKING SPACES |
VDI 6020 Blatt 1:2001-05 | Requirements on methods of calculation to thermal and energy simulation of buildings and plants - Buildings |
DIN 4035:1995-08 | REINFORCED CONCRETE PIPES AND SUITABLE FITTINGS - DIMENSIONS, TECHNICAL SPECIFICATIONS FOR DELIVERY |
DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
DIN 50930-1:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; GENERALES |
DIN 19850-1:1996-11 | FIBRE CEMENT PIPES AND FITTINGS FOR SEWERS - PART 1: DIMENSIONS OF PIPES, BRANCHES AND BENDS |
DIN 18121-2:2012-02 | SOIL, INVESTIGATION AND TESTING - WATERCONTENT - PART 2: DETERMINATION BY RAPID METHODS |
DIN 50930-3:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF HOT DIP IRON MATERIALS |
DIN 4701-1:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; BASIC RULES FOR CALCULATION |
VDI 2067 Blatt 6:1989-09 | Economy calculation of heat consuming installations; heat pumps |
DIN ISO 11465:1996-12 | SOIL QUALITY - DETERMINATION OF DRY MATTER AND WATER CONTENT ON A MASS BASIS - GRAVIMETRIC METHOD |
DVGW W 110 : 2005 | GEOPHYSICAL ANALYSIS OF BOREHOLES AND WELLS FOR DRINKING WATER RECOVERY |
DIN 19850-3:1990-11 | FIBRE-CEMENT MANHOLES FOR USE IN SEWERAGE SYSTEMS - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
VDI 2067 Blatt 1:2012-09 | Economic efficiency of building installations - Fundamentals and economic calculation |
DIN 4710:2003-01 | STATISTICS ON GERMAN METEOROLOGICAL DATA FOR CALCULATING THE ENERGY REQUIREMENTS FOR HEATING AND AIR CONDITIONING EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.