ISO 9211-3:2008
|
Optics and photonics — Optical coatings — Part 3: Environmental durability |
ISO 11455:1995
|
Raw optical glass Determination of birefringence |
EN ISO 4287:1998/A1:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
ISO 10110-14:2007
|
Optics and photonics Preparation of drawings for optical elements and systems Part 14: Wavefront deformation tolerance |
ISO/TR 14999-3:2005
|
Optics and photonics Interferometric measurement of optical elements and optical systems Part 3: Calibration and validation of interferometric test equipment and measurements |
ISO 10110-2:1996
|
Optics and optical instruments Preparation of drawings for optical elements and systems Part 2: Material imperfections Stress birefringence |
ISO 14880-3:2006
|
Optics and photonics — Microlens arrays — Part 3: Test methods for optical properties other than wavefront aberrations |
ISO 14880-2:2006
|
Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations |
ISO 10110-10:2004
|
Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements and cemented assemblies |
DIN ISO 15795:2008-04
|
OPTICS AND PHOTONICS - QUALITY EVALUATION OF OPTICAL SYSTEMS - ASSESSING THE IMAGE QUALITY DEGRADATION DUE TO CHROMATIC ABERRATIONS |
ISO 10110-5:2015
|
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances |
DIN ISO 10110-14:2008-12
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 14: WAVEFRONT DEFORMATION TOLERANCE |
DIN 58197-1:2015-09
|
OPTICAL COATINGS - PART 1: MINIMUM REQUIREMENTS FOR ANTIREFLECTING COATINGS |
ISO 4287:1997
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
DIN ISO 14999-4:2016-04
|
Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 (ISO 14999-4:2015) |
ISO 14880-4:2006
|
Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties |
ISO 10110-9:2016
|
Optics and photonics Preparation of drawings for optical elements and systems Part 9: Surface treatment and coating |
ISO 14880-1:2016
|
Optics and photonics Microlens arrays Part 1: Vocabulary and general properties |
ISO 15529:2010
|
Optics and photonics Optical transfer function Principles of measurement of modulation transfer function (MTF) of sampled imaging systems |
DIN ISO 9335:2015-12
|
OPTICS AND PHOTONICS - OPTICAL TRANSFER FUNCTION - PRINCIPLES AND PROCEDURES OF MEASUREMENT (ISO 9335:2012) |
EN ISO 14880-2:2006
|
Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006) |
ISO/TR 14999-2:2005
|
Optics and photonics Interferometric measurement of optical elements and optical systems Part 2: Measurement and evaluation techniques |
ISO 10110-4:1997
|
Optics and optical instruments Preparation of drawings for optical elements and systems Part 4: Material imperfections Inhomogeneity and striae |
ISO 14997:2017
|
Optics and photonics — Test methods for surface imperfections of optical elements |
ISO 9211-4:2012
|
Optics and photonics Optical coatings Part 4: Specific test methods |
DIN ISO 10110-8:2012-02
|
Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010) |
DIN EN ISO 14880-1:2015-01 (Draft)
|
OPTICS AND PHOTONICS - MICROLENS ARRAYS - PART 1: VOCABULARY AND GENERAL PROPERTIES (ISO 14880-1:2016) |
ISO 15795:2002
|
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations |
ISO 9335:2012
|
Optics and photonics — Optical transfer function — Principles and procedures of measurement |
ISO 11421:1997
|
Optics and optical instruments — Accuracy of optical transfer function (OTF) measurement |
EN ISO 14880-4:2006
|
Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) |
ISO 10110-8:2010
|
Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness |
DIN 58197-2:2015-09
|
OPTICAL COATINGS - PART 2: MINIMUM REQUIREMENTS FOR REFLECTING COATINGS |
ISO 10110-6:2015
|
Optics and photonics Preparation of drawings for optical elements and systems Part 6: Centring tolerances |
ISO/TR 14999-1:2005
|
Optics and photonics Interferometric measurement of optical elements and optical systems Part 1: Terms, definitions and fundamental relationships |
ISO 10110-3:1996
|
Optics and optical instruments Preparation of drawings for optical elements and systems Part 3: Material imperfections Bubbles and inclusions |
ISO 10110-12:2007
|
Optics and photonics Preparation of drawings for optical elements and systems Part 12: Aspheric surfaces |
EN ISO 14880-1:2016
|
OPTICS AND PHOTONICS - MICROLENS ARRAYS - PART 1: VOCABULARY AND GENERAL PROPERTIES (ISO 14880-1:2016) |
DIN ISO 10110-6:2016-06
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015) |
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
VDI 5583 Blatt 1:2011-11
|
Recommendations for interface specifications in the process chain of precision glass moulding of optical elements - Recommendations for optics design |
ISO 9211-1:2010
|
Optics and photonics Optical coatings Part 1: Definitions |
DIN 58197-4:2015-09
|
OPTICAL COATINGS - PART 4: MINIMUM REQUIREMENTS FOR COATINGS USED FOR LASER OPTICS |
DIN 58172-1:2007-07
|
Testing of optical systems - Part 1: Deviations from symmetry |
DIN 58189:2008-09
|
FUNDAMENTAL STANDARDS FOR OPTICS - DETERMINATION OF FOCAL LENGTH |
DIN ISO 9334:2015-12
|
OPTICS AND PHOTONICS - OPTICAL TRANSFER FUNCTION - DEFINITIONS AND MATHEMATICAL RELATIONSHIPS (ISO 9334:2012) |
DIN ISO 10110-3:2000-02
|
OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 3: MATERIAL IMPERFECTIONS - BUBBLES AND INCLUSIONS |
ISO 10110-1:2006
|
Optics and photonics Preparation of drawings for optical elements and systems Part 1: General |
DIN ISO 15529:2010-11
|
Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems (ISO 15529:2010) |
DIN ISO 10110-9:2016-12
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 9: SURFACE TREATMENT AND COATING (ISO 10110-9:2016) |
DIN ISO 10110-11:2016-12
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 11: NON-TOLERANCED DATA (ISO 10110-11:2016) |
DIN 58197-3:2015-09
|
OPTICAL COATINGS - PART 3: MINIMUM REQUIREMENTS FOR NEUTRAL BEAM SPLITTING COATINGS |
DIN ISO 11421:2010-10
|
Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement (ISO 11421:1997) |
DIN ISO 10110-5:2016-04
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 5: SURFACE FORM TOLERANCES (ISO 10110-5:2015) |
DIN ISO 10110-2:2000-02
|
OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 2: MATERIAL IMPERFECTIONS - STRESS BIREFRINGENCE |
ISO 9334:2007
|
Optics and photonics Optical transfer function Definitions and mathematical relationships |
EN ISO 14880-3:2006
|
Optics and phonotics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2006) |
ISO 9211-2:2010
|
Optics and photonics — Optical coatings — Part 2: Optical properties |
VDI 5580:2017-01
|
Precision glass moulding of optical elements - Basic technology |
ISO 10110-7:2017
|
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections |
ISO 10110-11:2016
|
Optics and photonics Preparation of drawings for optical elements and systems Part 11: Non-toleranced data |
DIN ISO 10110-7:2016-05 (Draft)
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES |
DIN ISO 12123:2011-10
|
OPTICS AND PHOTONICS - SPECIFICATION OF RAW OPTICAL GLASS (ISO 12123:2010) |
DIN ISO 10110-4:2000-02
|
OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 4: MATERIAL IMPERFECTIONS - INHOMOGENEITY AND STRIAE |
VDI 5582:2011-11
|
Preparation and cleaning of mould inserts and specimens to ensure reliable quality control measurements in the production chain of precision glass moulding |