VDI/VDE 2631 Blatt 1:2016-08
Current
The latest, up-to-date edition.
Form measurement - Principles
Hardcopy , PDF
German - English
01-08-2016
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Form measurement
5 Factors affecting the result
6 Measurement strategies for eliminating
external effects
7 Acceptance testing of form measuring
instruments
8 Stability monitoring of form measuring
instruments
Bibliography
Defines measurement methods and geometrical material measures (standards) such that the properties of form measuring instruments can be checked and traceable, reproducible, and comparable results of form measurements can be obtained.
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI/VDE 2631 Blatt 2:2014-06 | Form measurement - Verification of the signal transmission chain |
VDI/VDE 2631 Blatt 8:2013-09 | Form measurement - Stability monitoring of form measuring systems |
VDI/VDE 2631 Blatt 5:2015-06 | Form metrology - Determination of the axial spindle deviation |
VDI/VDE 2631 Blatt 6:2016-08 | Form measurement - Determination of the straightness deviation of the linear guide |
VDI/VDE 2631 Blatt 3:2007-08 | Form measurement - Properties and selection of filters |
VDI/VDE 2631 Blatt 4:2014-06 | Form measurement - Determination of the radial spindle deviation |
VDI/VDE 2631 Blatt 7:2012-02 | Form measurement - Determination of positional deviations of the form-measurement axes |
VDI/VDE 2631 Blatt 9:2014-10 | Form measurement - Examples for measurement and analysis conditions |
DKD-R 4-4 : 2009 | KALIBRIEREN VON NORMALEN UND MESSGERAETEN FUER DIE FORMMESSTECHNIK |
ISO 12181-2:2011 | Geometrical product specifications (GPS) Roundness Part 2: Specification operators |
EN ISO 12780-1:2011 | Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
VDI/VDE 2631-10 : 2014 COR 2015 | FORM MEASUREMENT - DETERMINATION OF THE UNCERTAINTY OF FORM MEASUREMENTS |
EN ISO 12181-1:2011 | Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
BS 3730-3:1982 | Assessment of departures from roundness Methods for determining departures from roundness using two- and three-point measurement |
DIN EN ISO 12780-1:2014-04 | Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
ISO 12181-1:2011 | Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness |
BS 3730-2:1982 | Assessment of departures from roundness Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration) |
VDI/VDE 2631 Blatt 6:2016-08 | Form measurement - Determination of the straightness deviation of the linear guide |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ASME B89.3.1 : 1972 | MEASUREMENT OF OUT-OF-ROUNDNESS |
BS 7172:1989 | Guide to assessment of position, size and departure from nominal form of geometric features |
VDI/VDE 2631 Blatt 7:2012-02 | Form measurement - Determination of positional deviations of the form-measurement axes |
DIN EN ISO 16610-21:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
ASME Y14.5.1M : 1994 | MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES |
VDI/VDE 2631 Blatt 9:2014-10 | Form measurement - Examples for measurement and analysis conditions |
ISO 12780-1:2011 | Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness |
DKD-R 4-2 : 1991 | CALIBRATION OF STYLUS INSTRUMENTS |
DIN EN ISO 12780-2:2011-07 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
ISO 16610-21:2011 | Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters |
VDI/VDE 2631 Blatt 5:2015-06 | Form metrology - Determination of the axial spindle deviation |
VDI/VDE 2631 Blatt 2:2014-06 | Form measurement - Verification of the signal transmission chain |
EN ISO 12780-2:2011 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
DIN EN ISO 12181-1:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
DIN EN ISO 12181-2:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
VDI/VDE 2631 Blatt 3:2007-08 | Form measurement - Properties and selection of filters |
EN ISO 16610-21:2012 | Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
VDI/VDE 2631 Blatt 4:2014-06 | Form measurement - Determination of the radial spindle deviation |
VDI/VDE 2631 Blatt 8:2013-09 | Form measurement - Stability monitoring of form measuring systems |
EN ISO 12181-2:2011 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
ISO 12780-2:2011 | Geometrical product specifications (GPS) Straightness Part 2: Specification operators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.