|
SAE AMS 2404 : 2013
|
PLATING, ELECTROLESS NICKEL |
|
SAE AMS 2422 : 2014
|
PLATING, GOLD |
|
MIL-DTL-55302 Revision G:2009
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
|
MIL-P-24691-3 Base Document:1987
|
Pipe And Tube, Corrosion-Resistant, Stainless Steel, Seamless Or Welded |
|
MIL-STD-130 Revision N:2007
|
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
|
MIL-PRF-39012 Revision F:2014
|
CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
|
ASTM B 339 : 2012 : REDLINE
|
Standard Specification for Pig Tin |
|
ASTM G 21 : 2015 : REDLINE
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
|
ANSI/NCSL Z540 3 : 2006(R2013)
|
REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
|
MIL-STD-1276 Revision H:2013
|
Leads for Electronic Component Parts |
|
ASTM B 545 : 2013 : REDLINE
|
Standard Specification for Electrodeposited Coatings of Tin |
|
ASTM B 221 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
|
ASTM B 121/B121M : 2016 : REDLINE
|
Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
|
MIL-STD-889 Revision C:2016
|
DISSIMILAR METALS |
|
MIL-DTL-5541 Revision F:2006
|
Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
|
MIL-STD-464 Revision C:2010
|
ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
|
MIL-DTL-19834 Revision C:2006
|
PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR |
|
SAE AMS I 23011:2012(S2017)
|
IRON-NICKEL ALLOYS FOR SEALING TO GLASSES AND CERAMIC |
|
MIL-DTL-3922 Revision E:2016
|
FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
|
ASTM B 679 : 1998
|
Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
|
SAE AMS QQ S 763D : 2013(S2015)
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
|
SAE AMS 4377 : 2011
|
MAGNESIUM ALLOY, SHEET AND PLATE, 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24), COLD ROLLED, PARTIALLY ANNEALED |
|
ASTM D 1710 : 2015 : REDLINE
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
|
SAE AMS QQ A 225 : 2012
|
ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR |
|
ASTM B 209 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
|
SAE AMS QQ A 250 B : 2012
|
ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR |
|
ISO 10012:2003
|
Measurement management systems — Requirements for measurement processes and measuring equipment |
|
ASTM B 194 : 2015 : REDLINE
|
Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
|
SAE AMS 4290 : 2017
|
ALUMINUM ALLOY, DIE CASTINGS 9.5SI - 0.50MG (360.0-F), AS CAST |
|
MIL-P-27418 Base Document:1967
|
PLATING, SOFT NICKEL (ELECTRODEPOSITED, SULFAMATE BATH) |
|
MIL-STD-202 Revision H:2015
|
ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
|
A-A-59126 Revision B:2012
|
Terminals, Feedthru (Insulated) and Terminals, Stud (Insulated and Noninsulated) |
|
TT-P-645 Revision C:2013
|
PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
|
ASTM B 241/B241M : 2016 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
|
SAE AMS QQ A 200 : 2004
|
ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
|
MIL-STD-1285 Revision D:2004
|
MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
|
FED-STD-H28 Revision A:1994
|
Screw-Thread Standards for Federal Services |
|
MIL-DTL-15090 Revision E:2010
|
ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
|
SAE AMS M 3171 : 1998
|
MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON |