• There are no items in your cart

ASTM G 21 : 2015 : REDLINE

Current

Current

The latest, up-to-date edition.

Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

Available format(s)

PDF

Language(s)

English

Published date

01-06-2015

CONTAINED IN VOL. 14.04, 2015 Describes the effect of fungi on the properties of synthetic polymeric materials in the form of molded and fabricated articles, tubes, rods, sheets, and film materials.

1.1This practice covers determination of the effect of fungi on the properties of synthetic polymeric materials in the form of molded and fabricated articles, tubes, rods, sheets, and film materials. Changes in optical, mechanical, and electrical properties may be determined by the applicable ASTM methods.

1.2The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
G 03
DocumentType
Redline
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current

MIL-DTL-43719 Revision D:2009 MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR
MIL-DTL-28788 Revision C:2010 SWITCHES, AIR AND LIQUID FLOW, SENSING, GENERAL SPECIFICATION FOR
MIL-PRF-46846 Revision D:2013 Rubber, Synthetic, Heat - Shrinkable
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
IEEE 1133-1988 IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications
MIL-DTL-13623 Revision E:2010 SWITCH, ROTARY: 28 VOLT DC
MIL-DTL-3655 Revision D:2004 Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for
MIL-R-83407 Revision D:2014 RELAYS, REED (MERCURY WETTED), GENERAL SPECIFICATION FOR
MIL-I-82799 Base Document:1989 INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE
CSA B45 SERIES : 2002 : R2013 PLUMBING FIXTURES
MMM-A-179 Revision B:1982 ADHESIVE PAPER LABEL
ASTM E 2180:2007 Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
MIL-DTL-13484 Revision G:2011 SWITCH, SENSITIVE: 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF
MIL-DTL-12285 Revision G:2016 SWITCHES, THERMOSTATIC
MIL-DTL-5815 Revision H:2012 ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR
SAE AMS 3636 : 2012 TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYOLEFIN, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO
ASTM D 6947/D6947M : 2016 : REDLINE Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
SAE AS 85848 : 2017 SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ASTM D 6947 : 2007 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
C22.2 NO. 355-18 Sealed twist-on connecting devices (Trinational standard with UL 486G and ANCE NMX-J-745)
ASTM D 4300 : 2001 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM E 1637 : 1998 : R2003 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM C 1325 : 2017-02 SPECIFICATION FOR NON-ASBESTOS FIBER-MAT REINFORCED CEMENTITIOUS BACKER UNITS
ASTM D 4300 : 2001 : R2008 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 6754 : 2002 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM C 647 : 2008 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM D 6083 : 2005 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
ASTM D 3105 : 2017 : REDLINE Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM E 1514 : 1998 : R2011 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
IEEE C37.23-2003 IEEE Standard for Metal-Enclosed Bus
NACE SP 01 69 : 2013 CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS
MIL-C-29169 Revision A:1983 CONDUIT, AND CONDUIT FITTINGS, METAL, RIGID POLYVINYL CHLORIDE [PVC] COATED
MIL-DTL-24640 Revision C:2011 CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR
MIL-DTL-24643 Revision C:2009 Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for
MIL-DTL-13735 Revision H:2017 Switches, Toggle: 28 Volt DC
MIL-PRF-71229 Revision D:2011 MOUNT, GUN, 120 MM
MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
MIL-DTL-28827 Revision C:2011 SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
IPC HDBK 830 : A GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS
MIL-DTL-32360 Base Document:2010 STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL
MIL-DTL-3950 Revision K:2016 Switches, Toggle, Environmentally Sealed, General Specification for
ASTM C 1822 : 2015 Standard Specification for Insulating Covers on Accessible Lavatory Piping
DOD-F-24610 Base Document:1982 FIXANT, HOLD DOWN
MIL-PRF-62678 Revision B:2010 PUMP, FUEL, ELECTRICAL: 12 AND 24 VOLT DIRECT CURRENT (METRIC)
MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
MIL-HDBK-304 Revision C:1997 PACKAGE CUSHIONING DESIGN
BS EN 61300-2-16:2006 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests - Mould growth
MIL R 46846 : B RUBBER, SYNTHETIC, HEAT-SHRINKABLE
SAE AMS 3683 : 2017 TUBING, IRRADIATED MODIFIED FLUOROPOLYMER PLASTIC, ELECTRICAL INSULATION FLAME RESISTANT, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO
MIL-I-46058 Revision C:1972 Insulating Compound, Electrical (for Coating Printed Circuit Assemblies)
AOP 20 : 2017 SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS
MIL-I-81765 Revision A:1987 INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
MIL-DTL-16878 Revision H:2012 WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
MIL-PRF-32002 Revision D:2008 COVER MATERIAL, VEHICLE, COATED TACTICAL AND COMBAT, HEAVY-DUTY, WATERPROOF
MIL-DTL-25516 Revision F:2004 CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR
MIL-STD-1250 Revision A:1992 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
SAE AMS F 24610 : 2016 FIXANT, HOLD DOWN
MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
MIL-STD-907 Revision B:1985 ENGINEERING AND DESIGN CRITERIA FOR SHELTERS, EXPANDABLE AND NONEXPANDABLE
MIL-DTL-83503 Revision C:2005 Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for
MIL-DTL-32361 Revision A:2011 COMPOSITE LIGHT, TAIL STOP, TURN AND MARKER
MIL-DTL-3702 Revision F:2012 CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION
MIL C 49055 : B CABLE, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR
MIL-HDBK-1250 Revision A:1995 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
CSA B45 SERIES :2002 PLUMBING FIXTURES
04/30122946 DC : DRAFT SEP 2004 IEC 61300-2-16 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
SAE AMS 3625 : 2016 ELASTOMERIC TUBING, ELECTRICAL INSULATION, CROSSLINKED SILICONE, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 1.750 TO 1 SHRINK RATIO
SAE AMS 3593 : 2017 TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, MARKER SLEEVING GRADE, LOW OUTGASSING
MIL P 15024 : E PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT
CSA Z662 PACKAGE : 2011 CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS
I.S. EN 61300-2-16:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
NSF 52 : 2017 SUPPLEMENTAL FLOORING
ASTM D 4300 : 2001 : R2013 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM E 2180 : 2007 : R2017 Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
ASTM E 1514 : 1998 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
ASTM E 1514 : 1998 : R2003 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
ASTM E 1637 : 1998 : R2011 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM E 1637 : 1998 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
UL 486G:1ED 2018-01 Sealed Twist-On Connecting Devices
SAE AS 23053 : 2016 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
NACE RP 01 69 : 2002 CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS
NEMA HP 5 : 2013 ELECTRICAL AND ELECTRONIC CROSS-LINKED, MODIFIED POLYETHYLENE (XLPE) INSULATED 125 DEGREES C HOOK-UP WIRE, TYPES L (600 V), LL (1000 V), AND LX (3000 V)
NEMA HP 8 : 2013 ELECTRICAL AND ELECTRONIC CROSS-LINKED, MODIFIED LOW-SMOKE POLYOLEFIN (XLPO) INSULATED HOOK-UP WIRE, TYPES LS (RATED 105 DEGREES C; 600 V), ZHDM (RATED 90 DEGREES C; 600 V), ZHDH (RATED 90 DEGREES C; 600 V), ZH (RATED 125 DEGREES C; 600 V), AND ZHX (RATED 125 DEGREES C; 1000 V)
MIL-DTL-83723-27 Revision C:2015 CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING
MIL I 23053 : D INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED
MIL-DTL-3928 Revision H:2016 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
A-A-59403 Revision A:2008
MIL-PRF-62061 Revision D:2009 Generator, Engine Accessory: 28 Volt DC, Rated Output 300 Ampere
MIL-PRF-62546 Revision C:2010 SENSOR, FIRE OPTICAL
MIL-DTL-46789 Revision D:2010 BLASTING MACHINE, AUXILIARY FIRING, EMERGENCY
MIL-DTL-32234 Base Document:2007 CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR
ASTM E 1637 : 1998 : R2017 : EDT 1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
MIL-DTL-14465 Revision F:2010 LIGHTS, COMPOSITE, 24 VOLTS DIRECT CURRENT (NOMINAL) VEHICULAR
MIL-DTL-5898 Revision H:2012 CORDS, ELECTRICAL (WF-5/U, WF-14/U, WD-34/U, WM-53/U, WM-85/U)
MIL-P-20689 Revision D:1988 PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
ASTM C 1705/C1705M : 2009 Standard Specification for Structural Cementitious Panels
MIL-DTL-10215 Revision M:2010 SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE SHAFT ASSEMBLY CORES AND ADAPTERS
MIL-P-46111 Revision C:1978 PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT)
MIL-DTL-915 Revision G:2002 Cable, Electrical, for Shipboard Use, General Specification for
TA NWT 001079 : ISSUE 1 GENERIC REQUIREMENTS FOR PRECAST CONCRETE MANHOLE STRUCTURES
MIL-PRF-62028 Revision D:2001 HOSE, AIR DUCT - HIGH TEMPERATURE FLEXIBLE, REINFORCED
MIL-DTL-62576 Revision B:1998 REGULATOR, ENGINE GENERATOR
SAE AMS 3632 : 2011 TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO
ASTM E 1514 : 1998 : R2017 : EDT 1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
ISO 8336:2017 Fibre-cement flat sheets — Product specification and test methods
CAN/CSA-Z662-15 Oil and gas pipeline systems
ASTM D 6083 : 2005 : EDT 1 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014)
ASTM D 6754/D6754M : 2015 : REDLINE Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
SAE AMS 3582 : 2017 PLASTIC TUBING, ELECTRICAL INSULATION - CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO
ISO 13629-1:2012 Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method
ASTM F 793/F793M : 2015 : REDLINE Standard Classification of Wall Coverings by Use Characteristics
CSA C22.2 No. 198.2 : 2005 SEALED WIRE CONNECTOR SYSTEMS
CSA C22.2 No. 198.2 : 2005 : R2015 SEALED WIRE CONNECTOR SYSTEMS
CSA C22.2 No. 198.2 : 2005 : R2010 SEALED WIRE CONNECTOR SYSTEMS
NASA KSC SPEC E 0031 : 2008 CABLES, ELECTRICAL, SPECIFICATION FOR
MIL-DTL-13791 Revision H:2015 DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT
SCTE 171 : 2016 PASSIVE NETWORK DEVICE (NID) ENCLOSURE SPECIFICATION
ASTM E 2180 : 2007 : R2012 Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
MIL-DTL-3992 Revision F:2007 HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS
MIL-PRF-38535 Revision K:2013 Integrated Circuits (Microcircuits) Manufacturing, General Specification for
NACE RP 06 75 : 1988 CORROSION CONTROL OF OFFSHORE STEEL PIPELINES
MIL-DTL-62545 Revision E:2013 Module, Standard Electronic Control
MIL-DTL-32362 Base Document:2010 LIGHT, MARKER, CLEARANCE-BLACK
BS 4618-4.5:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects The effect on plastics of soil burial and biological attack
MIL-DTL-13486 Revision G:2017 CABLES, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR AND MULTIPLE CONDUCTOR, SHIELDED AND UNSHIELDED, GENERAL SPECIFICATION FOR
MIL-DTL-49055 Revision G:2017 CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR
SAE AMS 3579 : 2017 PLASTIC TUBING, ELECTRICAL INSULATION, NON-CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 1.6 TO 1 SHRINK RATIO
MIL-I-24768 Base Document:1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR
MIL PRF 10215 : J SPEEDOMETERS; TACHOMETERS; FLEXIBLE SHAFT ASSEMBLIES; FLEXIBLE SHAFT ASSEMBLY CORES, ADAPTERS, AND TRANSMITTERS
MIL-PRF-71196 Base Document:2002 Sensor, Vehicle Motion
CEI EN 61300-2-16 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
MIL-DTL-8834 Revision K:2016 Switches, Toggle, Positive Break, General Specification for
SAE AS 85080 : 2012 INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR
ASTM D 5590 : 2017 : REDLINE Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
(INACTIVE RECORD)CSA B45 SERIES:2002 PLUMBING FIXTURES
MIL-DTL-23053 Revision E:1996 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
MIL-PRF-62122 Revision E:2011 CABLE ASSEMBLY, INTER-VEHICLE POWER: PLUG, RECEPTACLE, AND ADAPTER
MIL-DTL-12109 Revision D:1998 SOLENOID, ELECTRICAL; GUN-FIRING MECHANISMS, GENERAL SPECIFICATION FOR
SAE AMS DTL 23053 : 1999 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
SAE AS 81765 : 2017 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ASTM C 1288 : 2017 : REDLINE Standard Specification for Fiber-Cement Interior Substrate Sheets
SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
ASTM E 3152 : 2018 Standard Guide for Standard Test Methods and Practices Available for Determining Antifungal Activity on Natural or Synthetic Substrates Treated with Antimicrobial Agents
ASTM C 647 : 2008 : R2013 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
IEC 61300-2-16:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth
MIL-G-12803 Revision C:1989 GASKET MATERIAL, NON-METALLIC
MIL-F-26301 Revision H:2014 FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR
MIL-PRF-62528 Revision B:2010 REGULATOR, ENGINE GENERATOR: SOLID STATE 28 VOLT, DUAL CURRENT LIMIT, DIRECT CURRENT
MIL-DTL-62164 Revision E:2010 SEMITRAILER, LOWBED, HEAVY EQUIPMENT TRANSPORTER, 60-TON, M747
MIL W 16878 : F WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
GR 2890 CORE : ISSUE 2 FIBER IN THE LOOP ACTIVE NETWORK INTERFACE DEVICE
L-P-380 Revision C:1973 PLASTIC MOLDING MATERIAL METHACRYLATE
GR 1380 CORE : ISSUE 1 GENERIC REQUIREMENTS FOR FUSION SPLICE PROTECTORS
MIL-P-11268 Revision L:1983 PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT
DOD-STD-35-121 Base Document:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS
MIL-PRF-32504 Base Document:2014 MODULAR LARGE AREA MAINTENANCE SHELTER (MLAMS) TYPES: AVIATION (A), VEHICLE (V), STORAGE (S)
MIL-M-24605 Revision A:1988 MONITOR, HEAT STRESS
07/30169285 DC : 0 BS ISO 8336 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
MIL-DTL-24215 Revision E:2015 Attenuators, Variable (Coaxial), General Specification for
MIL-DTL-62547 Revision D:2010 VALVE AND CYLINDER ASSEMBLIES, HALON 1301
MIL-DTL-62011 Revision E:2009 Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for
MIL-DTL-442 Revision G:2012 CABLE, (WIRE), TWO CONDUCTOR, PARALLEL
MIL-DTL-38159 Revision D:2015 CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS
MIL-DTL-3432 Revision J:2009 CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS)
SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
SAE AS 81511 : 2016 CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR
UNI 11279-2 : 2008 ENGINEERED REPOSITORY FOR CATEGORY 2 RADIOACTIVE WASTE PACKAGES - PART 2: BASIC QUALIFICATION CRITERIA FOR ENGINEERED BARRIERS
ASTM D 6947 : 2007 : R2013 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM F 104 : 2011 : REDLINE Standard Classification System for Nonmetallic Gasket Materials
ASTM C 1705/C1705M : 2009 : R2016 Standard Specification for Structural Cementitious Panels
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE 789-2013 IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C37.21-2005 IEEE Standard for Control Switchboards
EN 61300-2-16 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
BS 8081:1989 Code of practice for ground anchorages

ASTM E 96/E96M : 2016 : REDLINE Standard Test Methods for Water Vapor Transmission of Materials
ASTM D 495 : 2014 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
FED-STD-191 Revision A:1978 TEXTILE TEST METHODS
ASTM D 1003 : 2013 : REDLINE Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
TAPPI T 451 : 0 FLEXURAL PROPERTIES OF PAPER (CLARK STIFFNESS)
ASTM D 257 : 2014 : REDLINE Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics

View more information
€69.98
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.