02/703231 DC : DRAFT FEB 2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS
23-07-2013
23-11-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbol and abbreviated terms
5 Factors affecting the behavior of CRAs (corrosion-resistant
alloys) and other alloys in H[2]S containing environments
6 Qualification and selection of CRAs (corrosion-resistant
alloys) and other alloys with respect to SSC, SCC and GHSC
in H[2]S containing environments
6.1 General
6.2 Evaluation of materials properties
7 Purchase and marking of materials
7.1 Information to be supplied for material purchase
7.2 Marking
Annex A (normative) Environmental cracking resistant CRAs and other
alloys
A.1 General
A.2 Austenitic stainless steels (identified as
material type and as individual alloys)
A.3 Highly Alloyed Austenitic Stainless Steels
(identified as material types and as
individual alloys)
A.4 Solid solution nickel based alloys (identified
as material types and as individual alloys)
A.5 Ferritic Stainless Steels (identified as
material type)
A.6 Martensitic (Stainless) Steels (identified as
individual alloys)
A.7 Duplex stainless steels (identified as material
type)
A.8 Precipitation Hardened Stainless Steels (identified
as individual alloys)
A.9 Precipitation-hardenable nickel-based alloys
(identified as individual alloys)
A.10 Cobalt based alloys (identified as individual
alloys)
A.11 Titanium and tantalum (Individual alloys)
A.12 Copper and aluminium based alloys (identified
as materials types)
A.13 Cladding, overlays and wear resistant alloys
Annex B (normative) Qualification of CRAs for H[2]S-service by
laboratory testing
B.1 General
B.2 Uses of laboratory qualifications
B.3 General requirements for tests
B.4 SSC testing
B.5 SCC Testing without S[0]
B.6 SSC/SCC testing at intermediate temperatures
B.7 SCC testing in the presence of S[0]
B.8 GHSC testing with carbon steel couple
Annex C (informative) Information to be supplied for material
purchase
Annex D (informative) Materials chemical compositions and other
information
Bibliography
BS EN ISO 15156-3
| Committee |
PSE/17
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO/TR 15510:1997 | Stainless steels Chemical composition |
| ASTM A 744/A744M : 2013 : REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASTM A 351/A351M : 2016-05 | SPECIFICATION FOR CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| BS HR 3:1972 | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.7, Ti 1.2) |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 7539-7:2005 | Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing |
| ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.