03/314351 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
Hardcopy , PDF
30-04-2008
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 General
4.1 Hazards to persons, property and environment
4.2 Refrigerant charge
4.3 Energy consumption
4.4 Maintenance, repair and testing
4.5 Materials
5 Requirements for components and piping
5.1 General requirements
5.2 Specific requirements
6 Requirements for assemblies
6.1 General
6.2 Design and construction
6.3 Testing
6.4 Marking and documentation
Annex A (normative) Checklist for external visual inspection of the
installation
Annex B (normative) Checklist for external visual inspection
Annex C (normative) Additional Requirements for Refrigerating systems
and heat pumps with Ammonia (NH[3])
Annex D (normative) Determination of category for assemblies
Annex E (normative) Requirements for intrinsic safety test
Annex F (normative) Additional Requirements for Refrigerating systems
and heat pumps using flammable refrigerants
Annex G (informative)
Annex H (informative) Examples for arrangement of pressure relief
devices in refrigerating systems
Annex ZA (informative) Clauses of this European Standard addressing
essential requirements or other provisions of EU
Directives
Annex ZB (informative) Clauses of this European Standard addressing
essential requirements or other provisions of EU Directives
Bibliography
EN 378-2
| Committee |
RHE/18
|
| DocumentType |
Draft
|
| Pages |
62
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 378-2 : DRAFT 2013 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 60335-2-40:2003/A13:2012/AC:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| PREN 378-4 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 4: OPERATION, MAINTENANCE, REPAIR AND RECOVERY |
| PREN 378-1 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA |
| EN 13202 : 2000 | ERGONOMICS OF THE THERMAL ENVIRONMENT - TEMPERATURES OF TOUCHABLE HOT SURFACES - GUIDANCE FOR ESTABLISHING SURFACE TEMPERATURE LIMIT VALUES IN PRODUCT STANDARDS WITH THE AID OF EN 563 |
| IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| EN 60335-2-89:2010/A2:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR (IEC 60335-2-89:2010/A2:2015, MODIFIED) |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EN 12517:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 60335-2-24:2010 | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| PREN 12693 : DRAFT 1996 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| PREN 14276-2 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| IEC 60721-2-1:2013 | Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
| EN 12263:1998 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
| IEC 60335-2-34:2012+AMD1:2015+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| PREN 13480-6 : DRAFT 99 | METALLIC INDUSTRIAL PIPING - PART 6: SAFETY SYSTEM |
| EN 1736:2008 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 60335-2-34:2013 | Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| EN 1861:1998 | Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| EN 13136:2013 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| EN 13313:2010 | Refrigerating systems and heat pumps - Competence of personnel |
| PREN 12284 : DRAFT 1996 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 837-2:1997 | Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
| ISO 817:2014 | Refrigerants — Designation and safety classification |
| EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| PREN 378-3 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| EN 1290:1998/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS |
| PREN 12178 : DRAFT 2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - LIQUID LEVEL INDICATING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.