ISO 2578:1993
|
Plastics Determination of time-temperature limits after prolonged exposure to heat |
EN 1555-1:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
NACE TM 01 87 : 2011
|
EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
ISO 22088-1:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance |
ISO 5271:1979
|
Benzene for industrial use Specification |
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ISO 1874-1:2010
|
Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
ISO 13628-1:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
EN 12201-4:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 1873-2:2007
|
Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 13628-9:2000
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 9: Remotely Operated Tool (ROT) intervention systems |
API TR 17TR2 : 2003
|
THE AGEING OF PA-11 IN FLEXIBLE PIPES |
ISO 22088-2:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method |
EN 12201-3:2011+A1:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings |
ISO 13628-3:2000
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
ISO 16770:2004
|
Plastics Determination of environmental stress cracking (ESC) of polyethylene Full-notch creep test (FNCT) |
ASTM D 543 : 2014 : REDLINE
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
ISO 14313:2007
|
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
ISO 11357-5:2013
|
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
ISO 22088-5:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method |
ASTM D 792 : 2013 : REDLINE
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ISO 14692-4:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation |
ISO 846:1997
|
Plastics Evaluation of the action of microorganisms |
API SPEC 17J : 2014
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
ISO 11357-3:2011
|
Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 1874-2:2012
|
Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 11357-4:2014
|
Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
EN 15553:2007
|
Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 14692-1:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials |
ISO 13628-7:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
ISO 22088-3:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method |
EN 12201-5:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
ISO 1791:1983
|
Building construction Modular co-ordination Vocabulary |
ISO 14692-2:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture |
EN 579:1993
|
Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction |
EN 1555-4:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 14001:2015
|
Environmental management systems — Requirements with guidance for use |
ISO 177:2016
|
Plastics Determination of migration of plasticizers |
ISO 1872-2:2007
|
Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 176:2005
|
Plastics — Determination of loss of plasticizers — Activated carbon method |
ISO 1183-2:2004
|
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
ISO 1183-3:1999
|
Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
ISO 9001:2015
|
Quality management systems — Requirements |
EN 12201-2:2011+A1:2013
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes |
ISO 15156-1:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
ISO 13628-6:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
ISO 4599:1986
|
Plastics Determination of resistance to environmental stress cracking (ESC) Bent strip method |
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
EN 1555-5:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
ISO 62:2008
|
Plastics Determination of water absorption |
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
EN 1555-2:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
ISO 22088-4:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method |
ISO 22088-6:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 6: Slow strain rate method |
ISO 13628-8:2002
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
ASTM D 695 : 2015 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Plastics |
ISO 13628-5:2009
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
EN 12201-1:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
ISO 11357-1:2016
|
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 14692-3:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design |
ASTM D 2990 : 2017 : REDLINE
|
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
ISO 6252:1992
|
Plastics Determination of environmental stress cracking (ESC) Constant-tensile-stress method |
ISO 4600:1992
|
Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 746 : 2014 : REDLINE
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
ASTM D 1693 : 2015 : REDLINE
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |