09/30196820 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS ISO 11850 - MACHINERY FOR FORESTRY - SELF-PROPELLED MACHINERY - SAFETY REQUIREMENTS
Hardcopy , PDF
31-12-2011
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
4.1 General
4.2 Safety distances, guards, shields
4.3 Operator station
4.3.1 Operator space envelope
4.3.2 Structures for operator protection
4.3.3 Seat
4.3.4 Seat belt
4.4 Access to operator's station and maintenance
locations
4.5 Controls
4.5.1 Starting
4.5.2 Engine stop control
4.5.3 Other controls
4.5.4 Warning alarm
4.5.5 Safety and reliability of control systems
4.5.6 Emergency attachment lowering
4.6 Visibility
4.7 Lighting
4.7.1 Working lights
4.7.2 Instrument and monitor lights
4.7.3 Operator station and maintenance lighting
4.8 Braking systems
4.9 Steering systems
4.10 Retrieval, tie down and machine lifting devices
4.11 Stability
4.12 Automatic processing systems
4.13 Electromagnetic compatibility
4.14 Fire risks
4.15 Noise
4.15.1 Noise reduction by design at source and by
protective measures
4.15.2 Verification
4.16 Vibration
4.16.1 Vibration reduction as a safety requirement
4.16.2 Verification
4.17 Storage places
4.18 Maintenance
4.19 Winches
5 Information for use
5.1 Instruction handbook
5.2 Marking
5.3 Warnings
Annex A (Informative) - List of significant hazards
Annex ZA (informative) - Relationship between this International
Standard and the Essential Requirements of EU Directive
98/37/EC, amended by Directive 98/79/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2006/42/EC
Bibliography
BS ISO 11850
| Committee |
AGE/29
|
| DocumentType |
Draft
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO 10532:1995 | Earth-moving machinery Machine-mounted retrieval device Performance requirements |
| ISO 10263-5:2009 | Earth-moving machinery Operator enclosure environment Part 5: Windscreen defrosting system test method |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| ISO 14269-2:1997 | Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 2: Heating, ventilation and air-conditioning test method and performance |
| ISO 11169:1993 | Machinery for forestry — Wheeled special machines — Vocabulary, performance test methods and criteria for brake systems |
| ISO 10570:2004 | Earth-moving machinery — Articulated frame lock — Performance requirements |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 3411:2007 | Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
| ISO 6683:2005 | Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests |
| ISO 6814:2009 | Machinery for forestry — Mobile and self-propelled machinery — Terms, definitions and classification |
| ISO 3600:2015 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format |
| ISO 19472:2006 | Machinery for forestry Winches Dimensions, performance and safety |
| ISO 5010:2007 | Earth-moving machinery Rubber-tyred machines Steering requirements |
| ISO 3767-4:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 4: Symbols for forestry machinery |
| ISO 8082-1:2009 | Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Part 1: General machines |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| ISO 11820:1996 | Acoustics — Measurements on silencers in situ |
| ISO 9244:2008 | Earth-moving machinery Machine safety labels General principles |
| ISO 2860:1992 | Earth-moving machinery — Minimum access dimensions |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols |
| ISO 11512:1995 | Machinery for forestry Tracked special machines Performance criteria for brake systems |
| ISO 15998:2008 | Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety |
| ISO 6405-1:2017 | Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 14163:1998 | Acoustics — Guidelines for noise control by silencers |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 11837:2011 | Machinery for forestry — Saw chain shot guarding systems — Test method and performance criteria |
| ISO 8083:2006 | Machinery for forestry Falling-object protective structures (FOPS) Laboratory tests and performance requirements |
| ISO 8084:2003 | Machinery for forestry — Operator protective structures — Laboratory tests and performance requirements |
| ISO 10533:1993 | Earth-moving machinery — Lift-arm support devices |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO 9533:2010 | Earth-moving machinery Machine-mounted audible travel alarms and forward horns Test methods and performance criteria |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 3450:2011 | Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| ISO 6750:2005 | Earth-moving machinery Operator's manual Content and format |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
| ISO 10265:2008 | Earth-moving machinery — Crawler machines — Performance requirements and test procedures for braking systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.