09/30201899 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 1949 - SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
Hardcopy , PDF
31-03-2011
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 Dynamic loads
4.2 Tightness
4.2.1 Requirements
4.2.2 Test
5 Cylinder compartments
5.1 General
5.2 Cylinder compartments with internal access
5.3 Cylinders secured outside the vehicle
5.4 Ventilation for cylinder compartments
5.5 Cylinder compartments with internal
access and low capacity cylinders
5.6 Requirements for the construction of
cylinder compartments
5.7 Electric equipment in cylinder compartments
6 Pressure regulation systems and working pressures
6.1 Pressure regulation systems
6.2 Marking of the working pressure
6.3 Devices to protect against over-pressure
6.4 Connection of pressure regulators to rigid
pipework - Low pressure supply
6.5 Connection of a dual cylinder system
6.6 Connection of an external LPG supply by means
of a plug-in connector
7 Components
7.1 Hoses
7.2 Pipes
7.3 Pipe fittings
7.4 Jointing materials
7.5 Shut-off valves
7.6 Consumer leak detection device
8 Installation design
8.1 General
8.2 Protection against mechanical damage
8.3 Avoidance of corrosion
8.4 Pipe sizing
8.5 Pipe fittings
8.6 Positioning of LPG pipes near to other services
8.7 Fixing
8.8 Shut-off valves
8.9 Earthing of LPG pipes
9 Connection of appliances to the LPG supply installation
10 Appliances
10.1 Suitability of appliances
10.2 Installations
10.3 Space heaters
10.3.1 Space heating appliances in caravans,
motor caravans and other road vehicles
10.3.2 Space heating appliances in caravan
holiday homes
10.4 Water heaters
10.4.1 Water heaters in caravans, motor
caravans and other road vehicles
10.4.2 Water heaters in caravan holiday homes
10.5 Cooking appliances
10.6 Refrigerators
10.7 Gas lights
10.8 LPG fuel cells
10.9 LPG power generators
11 Flueing
11.1 Flues
11.2 Flue terminals
11.3 Weather protection
11.4 Draught diverters
11.5 Accessibility of flues
12 Installation of LPG tanks supplying LPG appliances
12.1 Requirements regarding the LPG tank and
accessories
12.2 Installation of the LPG tank and the components
that are in contact with LPG in liquid phase
13 User's handbook
Annex A (informative) - National situations in the member
states
Annex B (informative) - Countries where underfloor flue is
not permitted
Bibliography
BS EN 1949
| Committee |
GSE/24
|
| DocumentType |
Draft
|
| Pages |
35
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 1949 : DRAFT 2009 | Identical |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 732:1998 | Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN 13878:2003 | Leisure accommodation vehicles - Terms and definitions |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12979:2002 | Automotive LPG-systems - Installation requirements |
| EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN 13786:2004+A1:2008 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
| EN 13785:2005+A1:2008 | Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 1647:2012 | Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety |
| EN 14585-1:2006 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| 1990/396/EEC : 1990 | COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.