I.S. EN 16125:2015
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
13/30279702 DC : 0
|
BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
10/30227098 DC : 0
|
BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
03/118276 DC : DRAFT NOV 2003
|
BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS |
05/30128654 DC : DRAFT FEB 2005
|
EN 1775 - GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
DIN CEN/TS 13547:2007-02
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
UNE-EN 13547:2014
|
Industrial valves - Copper alloy ball valves |
DD CEN/TS 13547:2006
|
Industrial valves. Copper alloy ball valves |
I.S. EN 1254-3:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES |
BS EN ISO 7396-1:2016
|
Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
I.S. EN 13547:2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
DIN EN ISO 23553-1:2014-09
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
BS EN 13828:2003
|
Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements |
BS EN 12288:2010
|
Industrial valves. Copper alloy gate valves |
BS EN 1254-2:1998
|
Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
UNE-EN 331:2016
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
I.S. EN 14812:2005
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
I.S. EN 12288:2010
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
DIN EN 13828:2003-12
|
BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS |
EN 12288:2010
|
Industrial valves - Copper alloy gate valves |
EN 1092-3:2003/AC:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN 13443-1:2002+A1:2007
|
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
EN 13547:2013
|
Industrial valves - Copper alloy ball valves |
UNI EN 1949 : 2013
|
SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
CEN/TS 13547:2006
|
Industrial valves - Copper alloy ball valves |
09/30202316 DC : 0
|
BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
DIN EN 15001-1:2011-02
|
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
07/30163621 DC : 0
|
BS EN 1254-5 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
EN ISO 7396-1:2016
|
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
99/707487 DC : DRAFT JUN 1999
|
PREN 13547 - INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
09/30201899 DC : 0
|
BS EN 1949 - SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
I.S. EN 1254-4:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
I.S. EN 15001-1:2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
EN 267:2009+A1:2011
|
Automatic forced draught burners for liquid fuels |
DIN EN 12288:2010-10
|
Industrial valves - Copper alloy gate valves |
DIN EN 267:2012-03 (Draft)
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
DIN EN 267:2011-11
|
Automatic forced draught burners for liquid fuels |
DIN EN 14868:2005-11
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
DIN EN 14868 E : 2005
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
BS EN 1254-3:1998
|
Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes |
BS EN 14812 : 2005
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
16/30310170 DC : DRAFT MAR 2016
|
BS ISO 18566-1 - BUILDING ENVIRONMENT DESIGN - DESIGN, TEST METHODS AND CONTROL OF HYDRONIC RADIANT HEATING AND COOLING PANEL SYSTEMS - PART 1: DEFINITION, SYMBOLS, TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
BS EN 13443-1:2002
|
Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing |
BS EN 1254-4:1998
|
Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends |
I.S. EN 1949:2011
|
SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX) |
DIN EN 1775:2007-10
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
I.S. EN 14652:2006
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
I.S. EN 1092-3:2003
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
I.S. EN 331:2015
|
MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
I.S. EN 13443-1:2002
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
I.S. EN 1775:2007
|
GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
DIN EN 15092:2008-09
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
BS EN 15092:2008
|
Building valves. Inline hot water supply tempering valves. Tests and requirements |
PREN 13547 : DRAFT 1999
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
07/19990369 DC : 0
|
BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
13/30255929 DC : 0
|
BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
I.S. EN 15092:2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
UNI EN 806-4 : 2010
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
07/30163618 DC : 0
|
BS EN 1254-2 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
12/30258099 DC
|
BS EN 267. Forced draught burners for liquid fuels |
BS EN 806-4:2010
|
Specifications for installations inside buildings conveying water for human consumption Installation |
09/30205880 DC : DRAFT OCT 2009
|
BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
EN 1254-3:1998
|
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
NF EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
07/30144895 DC : 0
|
BS EN 723 - COPPER AND COPPER ALLOYS - COMBUSTION METHOD FOR DETERMINATION OF CARBON CONTENT ON THE INNER SURFACE OF COPPER TUBES OR FITTINGS |
I.S. EN 1254-2:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
I.S. EN 1254-5:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
PREN 1949 : DRAFT 2009
|
SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
DIN EN ISO 7396-1:2016-09
|
MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
NF EN 806-4 : 2010
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
UNI EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
I.S. CEN TS 13547:2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
BS EN 267 : 2009
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
DIN EN 13443-1:2007-12
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
DIN EN 1949:2013-05
|
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013) |
DIN EN 331:2016-04
|
MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
DIN EN 14812 E : 2007
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
UNE-EN 1949:2011
|
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
UNE-EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
UNI EN 267 : 2011
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
UNE-EN 16125:2016
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
UNI EN 12288 : 2010
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
UNI EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
UNI EN 1775 : 2007
|
GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
UNI EN ISO 23553-1 : 2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
DIN EN 13547:2013-12
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
BS ISO 18566-1:2017
|
Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems Vocabulary, symbols, technical specifications and requirements |
BS EN 13547:2013
|
Industrial valves. Copper alloy ball valves |
ISO 18566-1:2017
|
Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 1: Vocabulary, symbols, technical specifications and requirements |
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
DIN EN 806-4:2010-06
|
Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
13/30276940 DC : 0
|
BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
DIN EN 16125:2016-03
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
I.S. EN ISO 23553-1:2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
PREN 331 : DRAFT 2013
|
MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
PREN 12288 : DRAFT 2009
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
BS EN 16125:2015
|
LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
UNE-EN ISO 7396-1:2016
|
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
ISO 7396-1:2016
|
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
I.S. EN 806-4:2010
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
BS EN 1949:2011+A1:2013
|
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
I.S. EN 267:2009
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
DIN EN 1092-3:2004-10
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
DIN EN 14652 E : 2007
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
BS EN 14868:2005
|
Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems |
BS EN 1759-3:2003
|
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges |
BS EN 1254-5:1998
|
Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
UNE-EN 15001-1:2010
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
BS EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
BS EN 13959:2004
|
Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D |
ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
12/30250105 DC : 0
|
BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
BS EN 331:2015
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
BS EN 14652 : 2005
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
BS EN 806-2:2005
|
Specifications for installations inside buildings conveying water for human consumption Design |
BS EN 1213:2000
|
Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements |
BS EN 1092-3:2003
|
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
EN 15092:2008
|
Building valves - Inline hot water supply tempering valves - Tests and requirements |
EN 1775:2007
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
EN 14652:2005+A1:2007
|
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
EN 14812:2005+A1:2007
|
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing |
EN 15001-1:2009
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
EN 13828:2003
|
Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements |
EN 14868 : 2005
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
EN 806-2:2005
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
EN 16125:2015
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
EN 806-4:2010
|
Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
EN 13959:2004
|
Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
EN 1759-3:2003/AC:2004
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN 331:2015
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
DIN EN 15092 E : 2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
I.S. EN ISO 7396-1:2016
|
MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
BS EN 15001-1:2009
|
Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
UNI EN 15092 : 2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
04/30114458 DC : 0
|
EN 14905 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - RECOMMENDED PRACTICE FOR THE INSTALLATION OF COPPER AND COPPER ALLOY PLUMBING FITTINGS |
03/118682 DC : DRAFT JAN 2004
|
PREN 14868 - PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN WATER RECIRCULATION SYSTEMS |
07/30168416 DC : 0
|
BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
UNI EN 806-2 : 2008
|
SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
BS EN 1949 : 2011
|
SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
DIN EN 1759-3:2004-10
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004 |
DIN EN 1254-4:1998-03
|
Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
DIN EN 806-2:2005-06
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
BS EN 1775:2007
|
Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
DIN EN 14812:2007-09
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
DIN EN 14652:2007-09
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
EN 1213:1999
|
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
DIN EN 13959:2005-01
|
Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004 |
EN 1949:2011+A1:2013
|
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
UNE-EN 16125:2020
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |