CISPR 12:2007+AMD1:2009 CSV
|
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
CISPR 20:2006+AMD1:2013 CSV
|
SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
EN ISO 9692-1 : 2013
|
WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 1: MANUAL METAL ARC WELDING, GAS-SHIELDED METAL ARC WELDING, GAS WELDING, TIG WELDING AND BEAM WELDING OF STEELS (ISO 9692-1:2013) |
IEC 61000-4-22:2010
|
Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs) |
CISPR 13:2009+AMD1:2015 CSV
|
Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics - Limits and methods of measurement |
CISPR 16-4-2:2011+AMD1:2014 CSV
|
Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
EN ISO 9692-2:1998/AC:1999
|
WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS |
CISPR 16-2-2:2010
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
CISPR 16-1-1:2015
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
CISPR 16-1-3:2004+AMD1:2016 CSV
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power |
CISPR 16-2-1:2014
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
CISPR 15:2013+AMD1:2015 CSV
|
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
EN ISO 18276 : 2017
|
WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 18276:2017) |
CISPR TR 16-4-3:2004+AMD1:2006 CSV
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products |
CISPR 32:2015 RLV
|
Electromagnetic compatibility of multimedia equipment - Emission requirements |
EN 10080 : 2005
|
STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
EN 10210-1 : 2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
EN 10210-2:2006/AC:2007
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
EN ISO 17660-1 : 2006
|
WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
EN 10219-1 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
EN ISO 14341 : 2011
|
WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
EN 12620:2002+A1:2008
|
AGGREGATES FOR CONCRETE |
IEC 61000-3-8:1997
|
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels |
ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
IEC 61000-4-20:2010
|
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
IEC 60335-2-76:2002+AMD1:2006+AMD2:2013 CSV
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
CISPR 16-2-3:2016
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
EN 10204 : 2004
|
METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
EN ISO 17632 : 2015
|
WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 17632:2015) |
EN ISO 15609-1 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
EN 10083-1 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
EN 10083-2 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
CISPR 11:2015 RLV
|
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
EN 10219-2 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
PREN 10138-4 : DRAFT 2000
|
PRESTRESSING STEELS - PART 4: BARS |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
EN 13670 : 2009
|
EXECUTION OF CONCRETE STRUCTURES |
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
IEC 61558-2-7:2007
|
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |