13/30284837 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 16689 - PROTECTIVE CLOTHING TO BE WORN BY FIREFIGHTERS DURING TECHNICAL RESCUE OPERATIONS
Hardcopy , PDF
30-04-2017
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General clothing design
5 Sampling and pre-treatment
6 Thermal requirements
7 Mechanical and other requirements
8 Marking
9 Information supplied by the manufacturer
Annex A (normative) - Uncertainty of measurement
Annex B (informative) - Guidelines for clothing design
Annex C (informative) - Checking of basic ergonomic features
of protective clothing
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 89/686/EEC
BS EN 16689
| Committee |
PH/3/2
|
| DocumentType |
Draft
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 16689 : DRAFT 2013 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN ISO 13937-2:2000 | Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
| ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 12127:1996 | Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
| ISO 16604:2004 | Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage |
| EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| EN 24920:1992 | Textiles - Determination of resistance to surface wetting (spray test) of fabrics |
| EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.