15/30331867 DC : 0
NA
Status of Standard is Unknown
BS EN ISO 10855-3 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING
Hardcopy , PDF
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Container inspection plate
5 Schedule of periodic inspection/examination and
test - containers
6 Container lifting test
7 Non-destructive examination of welds
8 Visual inspection
9 Marking of the inspection plate
10 Inspection report
11 Record keeping
12 Damage and repair procedures
13 Schedule of inspection/examination and test - Lifting
sets
14 Inspection of attachment of lifting set to an offshore
container
15 Pre-trip inspections
Annex A (informative) - Recommended knowledge and
experience of staff responsible for inspection of
offshore containers
Annex B (informative) - Recommended knowledge and
experience of staff responsible for inspection of
lifting sets intended for use with offshore containers
BS EN ISO 10855-3.
| Committee |
B/525/12
|
| DocumentType |
Draft
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| EN 30042 : 1994 | ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| EN ISO 10675-1:2016 | Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016) |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN ISO 23278 | Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015) |
| EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
| IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
| ISO 14965:2000 | Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| EN ISO 17643:2015 | Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015) |
| EN 818-4:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| IMO IA811 : 2001 | MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 1496-2:2008 | Series 1 freight containers Specification and testing Part 2: Thermal containers |
| ISO 668:2013 | Series 1 freight containers Classification, dimensions and ratings |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 13414-2:2003+A2:2008 | Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
| EN 12517-1:2006 | Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
| IMO I288 : 2000 SUPP 2008 | CODE OF SAFE PRACTICE FOR THE CARRIAGE OF CARGOES AND PERSONS BY OFFSHORE SUPPLY VESSELS (OSV CODE) |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.