EN ISO/IEC 17020:2012
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012)
Published date
01-03-2012
Publisher
Withdrawn date
30-09-2012
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Structural requirements
6 Resource requirements
7 Process requirements
8 Management system requirements
Annex A (normative) - Independence requirements for
inspection bodies
Annex B (informative) - Optional elements of inspection
reports and certificates
Bibliography
ISO/IEC 17020:2012 specifies requirements for the competence of bodies performing inspection and for the impartiality and consistency of their inspection activities. It applies to inspection bodies of type A, B or C, as defined in ISO/IEC 17020:2012, and it applies to any stage of inspection.
| Committee |
CEN/CLC/JTC 1
|
| DevelopmentNote |
Supersedes EN 45004. (10/2004)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| SS-EN ISO/IEC 17020 : 2012 | Identical |
| ISO/IEC 17020:2012 | Identical |
| DIN EN ISO/IEC 17020:2012-07 | Identical |
| I.S. EN ISO/IEC 17020:2012 | Identical |
| CEI UNI EN ISO/IEC 17020 : 2012 | Identical |
| NS EN ISO/IEC 17020 : 2012 | Identical |
| NBN EN ISO/IEC 17020 : 2012 | Identical |
| NEN EN ISO/IEC 17020 : 2012 | Identical |
| BS EN ISO/IEC 17020:2012 | Identical |
| NF EN ISO/IEC 17020 : 2012 | Identical |
| UNE-EN ISO/IEC 17020:2012 | Identical |
| S.R. CEN/TS 12666-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| 13/30279677 DC : 0 | BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| DIN EN 12572-2:2015-07 (Draft) | ARTIFICIAL CLIMBING STRUCTURES - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BOULDERING WALLS |
| 15/30321796 DC : 0 | BS EN 12572-2 - ARTIFICIAL CLIMBING STRUCTURES - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BOULDERING WALLS |
| I.S. EN 12079-3:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
| CEI EN 61400-22 : 2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| 17/30339497 DC : DRAFT JUNE 2017 | BS EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATER MIST SYSTEMS - PART 1: DESIGN, INSTALLATION, INSPECTION AND MAINTENANCE |
| PD CEN/TS 1852-2:2015 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| PD CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PD CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity |
| PD CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| S.R. CEN/TS 12200-2:2017 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| I.S. EN 15358:2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| S.R. CEN/TS 1566-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 1329-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 17/30363721 DC : 0 | BS EN 14564 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
| DIN EN 12732:2014-07 | Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
| DIN EN 12572-1:2015-07 (Draft) | ARTIFICIAL CLIMBING STRUCTURES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR ACS WITH PROTECTION POINTS |
| EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
| CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
| EN 61400-2:2014 | Wind turbines - Part 2: Small wind turbines |
| EN 50518-3:2013 | Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation |
| CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
| EN 12572-1:2017 | Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points |
| CEN/TS 1852-2:2015 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity |
| CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity |
| CLC/TR 50506-1:2007 | Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| CLC/TR 50506-2:2009 | Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 2: Safety assurance |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
| PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
| BS EN 3-10:2009 | Portable fire extinguishers Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| PD CLC/TR 50506-2:2009 | Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Safety assurance |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| 12/30254896 DC : 0 | BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION |
| PD CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| 13/30279680 DC : 0 | BS EN 15567-2 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| S.R. CEN/TR 14245:2014 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| PREN 50518-3 : DRAFT 2009 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| S.R. CEN/TS 1452-7:2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 14632:2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| EN 16991:2018 | Risk-based inspection framework |
| DIN EN 197-2:2014-05 | CEMENT - PART 2: CONFORMITY EVALUATION |
| BS EN 14564:2013 | Tanks for transport of dangerous goods. Terminology |
| BS EN 15567-2:2015 | Sports- and recreational facilities. Ropes courses Operation requirements |
| BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
| CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity |
| DIN EN 1775:2007-10 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| DIN EN 12572-2:2017-05 | ARTIFICIAL CLIMBING STRUCTURES - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BOULDERING WALLS |
| I.S. EN 15567-2:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| DIN EN 12572-1:2017-05 | ARTIFICIAL CLIMBING STRUCTURES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR ACS WITH PROTECTION POINTS |
| I.S. EN 196-10:2016 | METHODS OF TESTING CEMENT - PART 10: DETERMINATION OF THE WATER-SOLUBLE CHROMIUM (6) CONTENT OF CEMENT |
| DIN EN 197-2:2000-11 | CEMENT - PART 2: CONFORMITY EVALUATION |
| I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN 12572-1:2017 | ARTIFICIAL CLIMBING STRUCTURES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR ACS WITH PROTECTION POINTS |
| I.S. EN 1775:2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| DIN EN 12732:2000-09 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| VDI 2055 Blatt 2:2013-10 | Thermal insulation of heated and refrigerated operational installations in the industry and in the building services - Technical basics for the verification of properties of insulating materials |
| VDI 4208 Blatt 2:2011-10 | Requirements on bodies for emission monitoring at small firing installations - Bodies for periodic testing of performance-tested measuring devices |
| BS EN 15358:2011 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| DIN CEN/TS 1452-7;DIN SPEC 19675:2014-05 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CLC/TR 50506-1:2007 | Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Cross-acceptance |
| 09/30183531 DC : 0 | BS EN 50518-3 - MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| I.S. EN 3-10:2009 | PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7 |
| PREN 14564 : DRAFT 2017 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| PD CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity |
| S.R. CEN/TS 1565-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 12201-7:2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| S.R. CEN/TS 1455-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 12201-7:2014 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Guidance for the assessment of conformity |
| I.S. EN 16991:2018 | RISK-BASED INSPECTION FRAMEWORK |
| PREN 12572-2 : DRAFT 2015 | ARTIFICIAL CLIMBING STRUCTURES - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BOULDERING WALLS |
| BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
| PREN 197-2 : DRAFT 2012 | CEMENT - PART 2: CONFORMITY EVALUATION |
| PREN 15567-1 : DRAFT 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| I.S. EN 12572-2:2017 | ARTIFICIAL CLIMBING STRUCTURES - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BOULDERING WALLS |
| I.S. EN 14564:2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| BS EN 197-2:2014 | Cement Conformity evaluation |
| S.R. CEN/TS 1852-2:2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 14758-2:2016 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) Guidance for the assessment of conformity |
| PD CEN/TS 1452-7:2014 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PD CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PREN 12572-1 : DRAFT 2015 | ARTIFICIAL CLIMBING STRUCTURES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR ACS WITH PROTECTION POINTS |
| PD CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE) Guidance for the assessment of conformity |
| 15/30331867 DC : 0 | BS EN ISO 10855-3 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
| 13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| EN 12079-3:2006 | Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing |
| PREN 15567-2 : 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| S.R. CEN/TS 1453-2:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CLC/TR 50506-2:2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE |
| S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 14758-2:2016 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CWA 15740:2008 | RISK-BASED INSPECTION AND MAINTENANCE PROCEDURES FOR EUROPEAN INDUSTRY (RIMAP) |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| PREN 14972-1 : DRAFT 2017 | FIXED FIREFIGHTING SYSTEMS - WATER MIST SYSTEMS - PART 1: DESIGN, INSTALLATION, INSPECTION AND MAINTENANCE |
| BS EN 50518-3:2013 | Monitoring and alarm receiving centre Procedures and requirements for operation |
| I.S. CWA 15554:2006 | SPECIFICATIONS FOR A WEB ACCESSIBILITY CONFORMITY ASSESSMENT SCHEME AND A WEB ACCESSIBILITY QUALITY MARK |
| DIN EN 15567-2:2015-08 | SPORTS- AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| I.S. EN 197-2:2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| CEN/TR 14245:2014 | Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
| BS EN 12572-1:2017 | Artificial climbing structures Safety requirements and test methods for ACS with protection points |
| BS EN 12732 : 2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 15567-2:2015 | Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity |
| EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| EN 3-10:2009 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| EN 196-10:2016 | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement |
| 16/30337806 DC : 0 | BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF) |
| DIN EN 3-10:2010-03 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| PD CEN/TR 14245:2014 | Cement. Guidelines for the application of EN 197-2 Conformity Evaluation |
| S.R. CLC/TR 50506-1:2007 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE |
| 16/30328756 DC : 0 | BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
| PD CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity |
| CEI UNI EN 50518-3 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| 06/30100033 DC : 0 | BS EN 3-10 - PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3 PART 7 |
| BS EN 12572-2:2017 | Artificial climbing structures Safety requirements and test methods for bouldering walls |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| NF EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| 15/30321790 DC : 0 | BS EN 12572-1 - ARTIFICIAL CLIMBING STRUCTURES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR ACS WITH PROTECTION POINTS |
| PD CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC) Guidance for the assessment of conformity |
| I.S. EN 50518-3:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| 09/30202002 DC : 0 | BS EN 15358 - SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| DIN EN 14564:2013-04 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| 16/30328762 DC : 0 | BS EN 13814-3 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 3: REQUIREMENTS FOR INSPECTION DURING DESIGN, MANUFACTURE, OPERATION AND USE |
| S.R. CEN/TS 1555-7:2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 1519-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 1451-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 1329-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| I.S. EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
| BS EN 12079-3:2006 | Offshore containers and associated lifting sets Periodic inspection, examination and testing |
| BS EN 196-10:2016 | Methods of testing cement Determination of the water-soluble chromium (VI) content of cement |
| CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| EN 12572-2:2017 | Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls |
| CEN/TS 1452-7:2014 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| CEN/TS 14758-2:2016 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 12201-7:2014 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity |
| CEI UNI CEN/TR 17621:2022 | Accessibility and usability of the built environment - Conformity assessment |
| UNE-EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNE-EN 3-10:2010 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| UNE-EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| UNE-EN 12732:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNE-CEN/TS 1555-7:2015 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| UNE-EN 12572-1:2017 | Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points |
| UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| UNE-CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| UNE-EN 50518-3:2013 | Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation |
| UNE-EN 12732:2014+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNE-EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| UNE-EN 196-10:2016 | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement |
| CEI CLC/TR 50506-2 : 2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE |
| CEI CLC/TR 50506-1 : 2007 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE |
| UNE-EN 12572-2:2017 | Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 17000:2004 | Conformity assessment — Vocabulary and general principles |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology — Basic and general concepts and associated terms (VIM) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Summarise
Sorry this product is not available in your region.